참고문헌
- T. S. Ashton, Iron and steel in the industrial revolution, p.265, Manchester University Press, London, England (1924).
- M. F. Burditt, Ductile Iron Handbook, p.276, American Foundry Society, State of Illinois, America (2010).
- S. Wei and S. Lu, Mater. Design. 35, 43 (2012). https://doi.org/10.1016/j.matdes.2011.09.065
- Q.-y. Sha, D.-h. Li, G.-j. Huang and J. Guan, Int. J. Min. Met. Mater. 20, 741 (2013). https://doi.org/10.1007/s12613-013-0792-6
- A.R. Biswas, S. Chakraborty, P.S. Ghosh and D. Bose, Mater. Today-Proceedings. 5, 12384 (2018). https://doi.org/10.1016/j.matpr.2018.02.217
- X. He, X. Yang, G. Zhang, J. Li and H. Hu, Mater. Design. 40, 386 (2012). https://doi.org/10.1016/j.matdes.2012.04.010
- N. Lun, D.C. Saha, A. Macwan, H. Pan, L. Wang, F. Goodwin and Y. Zhou, Mater. Design. 131, 450 (2017). https://doi.org/10.1016/j.matdes.2017.06.037
- W. M. Thomas, P. L. Threadgill and E. D. Nicholas, Sci. Technol. Weld. Joi., 4, 365 (1999). https://doi.org/10.1179/136217199101538012
- T.C. Nguyen and D.C. Weckman, Metall. Mater. Trans. B. 37B, 275 (2006).
- S. Celik and I. Ersozlu, Mater. Design., 30, 970 (2009). https://doi.org/10.1016/j.matdes.2008.06.070
- T. Vuherer, P. Maruschak and I. Samardzic, Metalurgija, 51, 301 (2012).
- M. Junaid, F.N. Khan, K. Rahman and M. N. Baig, Opt. Laser. Technol. 97, 405 (2017). https://doi.org/10.1016/j.optlastec.2017.07.010
- P. H. O. M. Alves, M. S. F. Lima, D. Raabe and H. R. Z. Sandim, J. Mater. Process. Technol., 252, 498 (2018). https://doi.org/10.1016/j.jmatprotec.2017.10.008
- C. Y. Lee, D.H. Choi, Y. M. Yeon, W. C. Seo and S. B. Jung, J. Korean Weld. Join. Soc., 26, 556 (2008).
- U. Caligulu, M. Acik, Z. Balalan and N. Kati, Int. J. Steel. Struct., 15, 923 (2015). https://doi.org/10.1007/s13296-015-1213-7
- F. Sarsilmaz, I. Kirik and S. Bati, J. Manuf. Process., 28, 131 (2017). https://doi.org/10.1016/j.jmapro.2017.05.025
- M. Maalekian, Sci. Technol. Weld. Joi., 12, 738 (2007). https://doi.org/10.1179/174329307X249333
- M. B. Uday, M. N. Ahmad Fauzi, H. Zuhailawati and A. B. Ismail, Sci. Technol. Weld. Joi., 15, 534 (2013). https://doi.org/10.1179/136217110X12785889550064
- F. D. Duffin and A. S. Bahrani, Wear, 26, 53 (1973). https://doi.org/10.1016/0043-1648(73)90150-6
- E. H. Kim, H. Fujii, J. H. Kim and K. H. Song, Mater. Trans., 59, 503 (2018). https://doi.org/10.2320/matertrans.M2017354
- E. H. Kim, H. H. Cho and K. H. Song, Korean J. Mater. Res., 27, 276 (2017). https://doi.org/10.3740/MRSK.2017.27.5.276
- M. Vigneshwar, S.T. Selvamani, P. Hariprasath and K. Palanikumar, Mater. Today-Proc., 5, 7853 (2018). https://doi.org/10.1016/j.matpr.2017.11.466
- Z. Liang, G. Qin, P. Geng, F. Yang and X. Meng, Mater. Process. Tech., 25, 153 (2017).
- M. Stutz, F. Pixner, J. Wagner, N. Reheis, E. Raiser, H. Kestler and N. Enzinger, Int. J. Refract. Met. H., 73, 79 (2018). https://doi.org/10.1016/j.ijrmhm.2018.02.004
- S. Mironov, Y. S. Sato and H. Kokawa, Acta. Mater., 56, 2602 (2008). https://doi.org/10.1016/j.actamat.2008.01.040
- S. Emami, T. Saeid and R. A. Khosroshahi, J. Alloy. Compd., 739, 678 (2018). https://doi.org/10.1016/j.jallcom.2017.12.310
- T. R. McNelley, Mater. Sci. Eng. A., 230, 88 (1997). https://doi.org/10.1016/S0921-5093(97)00087-7
- T. F. A. Santos, E. A. Torres, J. C. Lippold and A.J. Ramirez, J. Mater. Eng. Perform., 25, 5173 (2016). https://doi.org/10.1007/s11665-016-2357-0
- H. Fujii, Weld. Int., 25, 260 (2011). https://doi.org/10.1080/09507111003655358
- H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata and K. Nogi, Mater. Sci. Eng. A., 429, 50 (2006). https://doi.org/10.1016/j.msea.2006.04.118
- M. Ashby, H. Shercliff and D. Cebon, Materials: engineering, science, processing and design, p.528, Elsevier Ltd., Oxford, England (2007).
- J. Pelleg, Mechanical Properties of Materials, p.645, G.M.L Gladwell, Springer, Berlin, German (2013).