DOI QR코드

DOI QR Code

Characterization and behaviors of single walled carbon nanotube by equivalent-continuum mechanics approach

  • Eltaher, Mohamed A. (Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University) ;
  • Almalki, Talaal A. (Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University) ;
  • Ahmed, Khaled I.E. (Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University) ;
  • Almitani, Khalid H. (Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University)
  • 투고 : 2018.11.25
  • 심사 : 2019.01.14
  • 발행 : 2019.01.25

초록

This paper focuses on two main objectives. The first one is to exploit an energy equivalent model and finite element method to evaluate the equivalent Young's modulus of single walled carbon nanotubes (SWCNTs) at any orientation angle by using tensile test. The calculated Young's modulus is validated with published experimental results. The second target is to exploit the finite element simulation to investigate mechanical buckling and natural frequencies of SWCNTs. Energy equivalent model is presented to describe the atomic bonding interactions and their chemical energy with mechanical structural energies. A Program of Nanotube modeler is used to generate a geometry of SWCNTs structure by defining its chirality angle, overall length of nanotube and bond length between two adjacent nodes. SWCNTs are simulated as a frame like structure; the bonds between each two neighboring atoms are treated as isotropic beam members with a uniform circular cross section. Carbon bonds is simulated as a beam and the atoms as nodes. A finite element model using 3D beam elements is built under the environment of ANSYS MAPDL environment to simulate a tensile test and characterize equivalent Young's modulus of whole CNT structure. Numerical results are presented to show critical buckling loads, axial and transverse natural frequencies of SWCNTs with different orientation angles and lengths. The understanding of mechanical behaviors of CNTs are essential in developing such structures due to their great potential in wide range of engineering applications.

키워드

참고문헌

  1. Akgoz, B. and Civalek, O . (2016), "Bending analysis of embedded carbon nanotubes resting on an elastic foundation using strain gradient theory", Acta Astronautica, 119, 1-12. https://doi.org/10.1016/j.actaastro.2015.10.021
  2. Alessi, R., Favata, A. and Micheletti, A. (2017), "Pressurized CNTs under tension: A finite-deformation lattice model", Compos. Part B: Eng., 115, 223-235. https://doi.org/10.1016/j.compositesb.2016.10.006
  3. Awang, M., Mohammadpour, E. and Muhammad, I.D. (2015), Finite Element Modeling of Nanotube Structures: Linear and Non-linear Models, Springer.
  4. Baykasoglu, C., Kirca, M. and Mugan, A. (2013), "Nonlinear failure analysis of carbon nanotubes by using molecularmechanics based models", Compos. Part B: Eng., 50, 150-157. https://doi.org/10.1016/j.compositesb.2013.02.008
  5. Benguediab, S., Tounsi, A., Zidour, M. and Semmah, A. (2014), "Chirality and scale effects on mechanical buckling properties of zigzag double-walled carbon nanotubes", Compos. Part B: Eng., 57, 21-24. https://doi.org/10.1016/j.compositesb.2013.08.020
  6. Caruntu, D.I. and Luo, L. (2014), "Frequency response of primary resonance of electrostatically actuated CNT cantilevers", Nonlinear Dyn., 78(3), 1827-1837. https://doi.org/10.1007/s11071-014-1537-4
  7. Eberhardt, O. and Wallmersperger, T. (2015), "Energy consistent modified molecular structural mechanics model for the determination of the elastic properties of single wall carbon nanotubes", Carbon, 95, 166-180. https://doi.org/10.1016/j.carbon.2015.07.092
  8. Ebrahimi, F. and Mahmoodi, F. (2018), "Vibration analysis of carbon nanotubes with multiple cracks in thermal environment", Adv. Nano Res., Int. J., 6(1), 57-80.
  9. Eltaher, M.A. and Agwa, M.A. (2016), "Analysis of sizedependent mechanical properties of CNTs mass sensor using energy equivalent model", Sens. Actuat. A: Phys., 246, 9-17. https://doi.org/10.1016/j.sna.2016.05.009
  10. Eltaher, M.A., El-Borgi, S. and Reddy, J.N. (2016a), "Nonlinear analysis of size-dependent and material-dependent nonlocal CNTs", Compos. Struct., 153, 902-913. https://doi.org/10.1016/j.compstruct.2016.07.013
  11. Eltaher, M.A., Agwa, M.A. and Mahmoud, F.F. (2016b), "Nanobeam sensor for measuring a zeptogram mass", Int. J.of Mech. Mater. Des., 12(2), 211-221. https://doi.org/10.1007/s10999-015-9302-5
  12. Eltaher, M.A., Khater, M.E., Park, S., Abdel-Rahman, E. and Yavuz, M. (2016c), "On the static stability of nonlocal nanobeams using higher-order beam theories", Adv. Nano Res., Int. J., 4(1), 51-64.
  13. Eltaher, M.A., Agwa, M. and Kabeel, A. (2018a), "Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model", J. Appl. Computat. Mech., 4(2), 75-86.
  14. Eltaher, M.A., Abdraboh, A.M. and Almitani, K.H. (2018b), "Resonance Frequencies of Size Dependent Perforated Nonlocal Nanobeam", Microsyst. Technol., 24(9), 3925-3937. https://doi.org/10.1007/s00542-018-3910-6
  15. Eltaher, M.A., Kabeel, A.M., Almitani, K.H. and Abdraboh, A.M. (2018c), "Static bending and buckling of perforated nonlocal size-dependent nanobeams", Microsyst. Technol., 24(12), 4881-4893. https://doi.org/10.1007/s00542-018-3905-3
  16. Eltaher, M.A., Mohamed, N., Mohamed, S. and Seddek, L.F. (2019), "Postbuckling of Curved Carbon Nanotubes Using Energy Equivalent Model", J. Nano Res. [Accepted]
  17. Emam, S., Eltaher, M., Khater, M. and Abdalla, W. (2018), "Postbuckling and Free Vibration of Multilayer Imperfect Nanobeams under a Pre-Stress Load", Appl. Sci., 8(11), 2238. https://doi.org/10.3390/app8112238
  18. Esbati, A.H. and Irani, S. (2018), "Probabilistic mechanical properties and reliability of carbon nanotubes", Arch. Civil Mech. Eng., 18(2), 532-545. https://doi.org/10.1016/j.acme.2017.05.001
  19. Gajbhiye, S.O. and Singh, S.P. (2015), "Vibration characteristics of open-and capped-end single-walled carbon nanotubes using multi-scale analysis technique incorporating Tersoff-Brenner potential", Acta Mechanica, 226(11), 3565-3586. https://doi.org/10.1007/s00707-015-1390-7
  20. Genoese, A., Genoese, A., Rizzi, N.L. and Salerno, G. (2017), "On the derivation of the elastic properties of lattice nanostructures: the case of graphene sheets", Compos. Part B: Eng., 115, 316-329. https://doi.org/10.1016/j.compositesb.2016.09.064
  21. Ghadyani, G., Soufeiani, L. and Ochsner, A. (2016), "On the characterization of the elastic properties of asymmetric singlewalled carbon nanotubes", J. Phys. Chem. Solids, 89, 62-68. https://doi.org/10.1016/j.jpcs.2015.10.013
  22. Ghadyani, G., Soufeiani, L. and Ochsner, A. (2017), "Angle dependence of the shear behaviour of asymmetric carbon nanotubes", Mater. Des., 116, 136-143. https://doi.org/10.1016/j.matdes.2016.11.097
  23. Haile, J.M. (1992), Molecular dynamics simulation: elementary methods, John Wiley & Sons, Inc.
  24. Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354(6348), 56. https://doi.org/10.1038/354056a0
  25. Krishnan, A., Dujardin, E., Ebbesen, T.W., Yianilos, P.N. and Treacy, M.M.J. (1998), "Young's modulus of single-walled nanotubes", Phys. Rev. B, 58(20), 14013. https://doi.org/10.1103/PhysRevB.58.14013
  26. Kumar, B.R. (2018), "Investigation on mechanical vibration of double-walled carbon nanotubes with inter-tube Van der waals forces", Adv. Nano Res., Int. J., 6(2), 135-145.
  27. Lee, J.H. and Lee, B.S. (2012), "Modal analysis of carbon nanotubes and nanocones using FEM", Computat. Mater. Sci., 51(1), 30-42. https://doi.org/10.1016/j.commatsci.2011.06.041
  28. Li, C. and Chou, T.W. (2003), "A structural mechanics approach for the analysis of carbon nanotubes", Int. J. Solids Struct., 40(10), 2487-2499. https://doi.org/10.1016/S0020-7683(03)00056-8
  29. Lu, X. and Hu, Z. (2010), "Evaluation of Mechanical Behaviors of Single-Walled Carbon Nanotubes by Finite Element Analysis", ASME 2010 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, pp. 81-91.
  30. Narendar, S. and Gopalakrishnan, S. (2009), "Nonlocal scale effects on wave propagation in multi-walled carbon nanotubes", Computat. Mater. Sci., 47(2), 526-538. https://doi.org/10.1016/j.commatsci.2009.09.021
  31. Rappe, A.K., Casewit, C.J., Colwell, K.S., Goddard Iii, W.A. and Skiff, W.M. (1992), "UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations", J. Am. Chem. Soc., 114(25), 10024-10035. https://doi.org/10.1021/ja00051a040
  32. Shahabodini, A., Ansari, R. and Darvizeh, M. (2018), "Atomisticcontinuum modeling of vibrational behavior of carbon nanotubes using the variational differential quadrature method", Compos. Struct., 185, 728-747. https://doi.org/10.1016/j.compstruct.2017.11.028
  33. She, G.L., Yuan, F.G., Ren, Y.R. and Xiao, W.S. (2017a), "On buckling and postbuckling behavior of nanotubes", Int. J. Eng. Sci., 121, 130-142. https://doi.org/10.1016/j.ijengsci.2017.09.005
  34. She, G.L., Yuan, F.G. and Ren, Y.R. (2017b), "Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory", Compos. Struct., 165, 74-82. https://doi.org/10.1016/j.compstruct.2017.01.013
  35. She, G.L., Yuan, F.G., Ren, Y.R., Liu, H.B. and Xiao, W.S. (2018a), "Nonlinear bending and vibration analysis of functionally graded porous tubes via a nonlocal strain gradient theory", Compos. Struct., 203, 614-623. https://doi.org/10.1016/j.compstruct.2018.07.063
  36. She, G.L., Ren, Y.R., Yuan, F.G. and Xiao, W.S. (2018b), "On vibrations of porous nanotubes", Int. J. Eng. Sci., 125, 23-35. https://doi.org/10.1016/j.ijengsci.2017.12.009
  37. She, G.L., Yuan, F.G., Karami, B., Ren, Y.R. and Xiao, W.S. (2019), "On nonlinear bending behavior of fg porous curved nanotubes", Int. J. Eng. Sci., 135, 58-74. https://doi.org/10.1016/j.ijengsci.2018.11.005
  38. Shokrieh, M.M. and Rafiee, R. (2010), "Prediction of Young's modulus of graphene sheets and carbon nanotubes using nanoscale continuum mechanics approach", Mater. Des., 31(2), 790-795. https://doi.org/10.1016/j.matdes.2009.07.058
  39. Vila, J., Fernandez-Saez, J. and Zaera, R. (2018), "Reproducing the nonlinear dynamic behavior of a structured beam with a generalized continuum model", J. Sound Vib., 420, 296-314. https://doi.org/10.1016/j.jsv.2018.01.040
  40. Yuan, X. and Wang, Y. (2018), "Radial deformation of singlewalled carbon nanotubes adhered to solid substrates and variations of energy: atomistic simulations and continuum analysis", Int. J. Solids Struct.
  41. Wu, Y., Zhang, X., Leung, A.Y.T. and Zhong, W. (2006), "An energy-equivalent model on studying the mechanical properties of single-walled carbon nanotubes", Thin-Wall. Struct., 44(6), 667-676. https://doi.org/10.1016/j.tws.2006.05.003
  42. Zuberi, M.J.S. and Esat, V. (2016), "Evaluating the effects of size and chirality on the mechanical properties of single-walled carbon nanotubes through equivalent-continuum modelling", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(5), 913-926. https://doi.org/10.1177/1464420715588217

피인용 문헌

  1. Buckling behavior of a single-layered graphene sheet resting on viscoelastic medium via nonlocal four-unknown integral model vol.34, pp.5, 2019, https://doi.org/10.12989/scs.2020.34.5.643
  2. Hygro-Magnetic Vibration of the Single-Walled Carbon Nanotube with Nonlinear Temperature Distribution Based on a Modified Beam Theory and Nonlocal Strain Gradient Model vol.12, pp.5, 2020, https://doi.org/10.1142/s1758825120500544
  3. Dynamic analysis of functionally graded nonlocal nanobeam with different porosity models vol.36, pp.3, 2019, https://doi.org/10.12989/scs.2020.36.3.293
  4. Nonlocal vibration of carbon/boron-nitride nano-hetero-structure in thermal and magnetic fields by means of nonlinear finite element method vol.7, pp.5, 2019, https://doi.org/10.1093/jcde/qwaa041
  5. Flow of casson nanofluid along permeable exponentially stretching cylinder: Variation of mass concentration profile vol.38, pp.1, 2019, https://doi.org/10.12989/scs.2021.38.1.033
  6. Monitoring and control of multiple fraction laws with ring based composite structure vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.129
  7. Flow of MHD Powell-Eyring nanofluid: Heat absorption and Cattaneo-Christov heat flux model vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.221
  8. Nanoscale quantitative mechanical mapping of poly dimethylsiloxane in a time dependent fashion vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.253
  9. Effect of suction on flow of dusty fluid along exponentially stretching cylinder vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.263
  10. Temperature jump and concentration slip effects on bioconvection past a vertical porous plate in the existence of nanoparticles and gyrotactic microorganism with inclined MHD vol.11, pp.1, 2019, https://doi.org/10.12989/anr.2021.11.1.0127
  11. The effects of ring and fraction laws: Vibration of rotating isotropic cylindrical shell vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.019
  12. Propagation of waves with nonlocal effects for vibration response of armchair double-walled CNTs vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.183
  13. An investigation of mechanical properties of kidney tissues by using mechanical bidomain model vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.193