Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Optimization of the braced dome structures by using Jaya algorithm with frequency constraints

  • Grzywinski, Maksym (Czestochowa University of Technology, Faculty of Civil Engineering) ;
  • Dede, Tayfun (Karadeniz Technical University, Department of Civil Engineering) ;
  • Ozdemir, Yaprak Itir (Karadeniz Technical University, Department of Civil Engineering)
  • Received : 2018.11.14
  • Accepted : 2018.12.31
  • Published : 2019.01.10
⟨ Previous Next ⟩

Abstract

The aim of this paper is to present new and an efficient optimization algorithm called Jaya for the optimum mass of braced dome structures with natural frequency constraints. Design variables of the bar cross-section area and coordinates of the structure nodes were used for size and shape optimization, respectively. The effectiveness of Jaya algorithm is demonstrated through three benchmark braced domes (52-bar, 120-bar, and 600-bar). The algorithm applied is an effective tool for finding the optimum design of structures with frequency constraints. The Jaya algorithm has been programmed in MATLAB to optimize braced dome.

Keywords

References

  1. Artar, M. (2016a), "A comparative study on optimum design of multi-element truss structures", Steel Compos. Struct., Int. J., 22(3), 521-535. https://doi.org/10.12989/scs.2016.22.3.521
  2. Artar, M. (2016b), "Optimum design of braced steel frames via teaching learning based optimization", Steel Compos. Struct., Int. J., 22(4), 733-744. https://doi.org/10.12989/scs.2016.22.4.733
  3. Artar, M., and Daloglu, A.T. (2017), "Optimum design of composite steel frames with semi-rigid connections and column bases via genetic algorithm", Steel Compos. Struct., Int. J., 19(4), 1035-1053. https://doi.org/10.12989/scs.2015.19.4.1035
  4. Artar, M., Catar, R. and Daloglu, A.T. (2017), "Optimum design of steel bridges including corrosion effect using TLBO", Struct. Eng. Mech., Int. J., 63(5), 607-615.
  5. Baghlani, A. and Makiabadi, M.H. (2013), "Teaching-learningbased optimization algorithm for shape and size optimization of truss structures with dynamic frequency constraints", Iran J. Sci. Technol., 37, 409-421.
  6. Bellagamba, L. and Yang, T. (1981), "Minimum-mass truss structures with constraints on fundamental natural frequency", AIAA J., 19, 1452-1458. https://doi.org/10.2514/3.7875
  7. Dede, T. (2018), "Jaya algorithm to solve single objective size optimization problem for steel grillage structures", Steel Compos. Struct., Int. J., 26(2), 163-170.
  8. Dede, T. and Togan, V. (2015), "A teaching learning based optimization for truss structures with frequency constraints", Struct. Eng. Mech., Int. J., 53(4), 833-845. https://doi.org/10.12989/sem.2015.53.4.833
  9. Degertekin, S.O., Lamberti, L. and Ugur, I.B. (2018), "Sizing, layout and topology design optimization of truss structures using the Jaya algorithm", Appl. Soft Comput., 70, 903-928. https://doi.org/10.1016/j.asoc.2017.10.001
  10. Farshchin, M., Camp, C.V. and Maniat, M. (2016), "Multi-class teaching-learning-based optimization for truss design with frequency constraints", Eng. Struct., 106, 356-369.
  11. Gomes, H.M. (2011), "Truss optimization with dynamic constraints using a particle swam algorithm", Expert Syst. Appl., 38, 957-968. https://doi.org/10.1016/j.eswa.2010.07.086
  12. Kaveh, A. and Ghazaan, M.I. (2016), "Optimal design of dome truss structures with dynamic frequency constraints", Struct. Multidisc. Optim., 53, 605-621. https://doi.org/10.1007/s00158-015-1357-2
  13. Kaveh, A. and Ghazaan, M.I. (2017), "Vibrating particles system algorithm for truss optimization with multiple natural frequency constraints", Acta Mechanica, 228, 307-322. https://doi.org/10.1007/s00707-016-1725-z
  14. Kaveh, A. and Javadi, S.M. (2014), "Shape and size optimization of trusses with multiple frequency constraints using harmony search and ray optimizer for enhancing the particle swarm optimization algorithm", Acta Mech., 225, 1595-1605. https://doi.org/10.1007/s00707-013-1006-z
  15. Kaveh, A. and Mahdavi, V.R. (2015), "Colling-bodies optimization for truss with multiple frequency constraints", J. Comput. Civil Eng., 29(5), 04014078. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000402
  16. Kaveh, A. and Zolghadr, A. (2012), "Truss optimization with natural frequency constraints using a hybridized CSS-BBBC algorithm with trap recognition capability", Comput. Struct., 102-103, 14-27. https://doi.org/10.1016/j.compstruc.2012.03.016
  17. Kaveh, A. and Zolghadr, A. (2014a), "Democratic PSO for truss layout and size optimization with frequency constraints", Comput. Struct., 130(3), 10-21. https://doi.org/10.1016/j.compstruc.2013.09.002
  18. Kaveh, A. and Zolghadr, A. (2014b), "A new PSRO algorithm for frequency constraint truss shape and size optimization", Struct. Eng. Mech., Int. J., 52(3), 445-468. https://doi.org/10.12989/sem.2014.52.3.445
  19. Kaveh, A. and Zolghadra, A. (2016), "Optimal analysis and design of large-scale domes with frequency constraints", Smart Struct. Syst., Int. J., 18(4), 733-754. https://doi.org/10.12989/sss.2016.18.4.733
  20. Kaveh, A. and Zolghadra, A. (2018), "Meta-heuristic methods for optimization of truss structures with vibration frequency constraints", A review, Rev. Prespect. Mech. Acta Mech., 229(10), 3971-3992. https://doi.org/10.1007/s00707-018-2234-z
  21. Lin, J.H., Chen, W.Y. and Yu, Y.S. (1982), "Structural optimization on geometrical and element sizing with static and dynamic constraints", Comput. Struct., 15, 507-515. https://doi.org/10.1016/0045-7949(82)90002-5
  22. Lingyum, W., Me, Z., Guangming, W. and Guang, M. (2005), "Truss optimization on shape and sizing with frequency constraints based on genetic algorithm", Comput. Mech., 35, 361-368. https://doi.org/10.1007/s00466-004-0623-8
  23. Miguel, L.F.F. and Miguel, L.F.F. (2012), "Shape and size optimization of truss structures considering dynamic constraints through modern metaheuristic algorithms", Expert Syst. Appl., 39, 9458-9467. https://doi.org/10.1016/j.eswa.2012.02.113
  24. Rao, R.V. (2016), "Jaya: A simple and new optimization algorithm for solving constrained and unconstrained optimization problems", Int. J. Ind. Eng. Comput., 7, 19-34.
  25. Rao, R.V. (2018), Jaya: An Advanced Optimization Algorithm and its Engineering Applications, Springer.
  26. Talaslioglu, T. (2012), "Multiobjective size and topolgy optimization of dome structures", Struct. Eng. Mech., Int. J., 43(6), 795-822. https://doi.org/10.12989/sem.2012.43.6.795
  27. Talaslioglu, T. (2013), "Weight Minimization of Tubular Dome Structures by a Particle Swarm Methodology", Kuwait J. Sci. Eng., 1(1b), 145-180.
  28. Tejani, G.G., Savsani, V.J. and Patel, V.K. (2016), "Adaptive symbiotic organisms search (SOS) algorithm for structural design optimization", J. Computat. Des. Eng., 3, 226-249.
  29. Tejani, G.G., Savsani, V.J., Patel, V.K. and Mirjalili, S. (2018), "Truss optimization with natural frequency bounds using symbiotic organisms search", Knowledge-Based Syst., 143, 162-178. https://doi.org/10.1016/j.knosys.2017.12.012

Cited by

  1. Multiobjective Construction Optimization Model Based on Quantum Genetic Algorithm vol.2019, 2019, https://doi.org/10.1155/2019/5153082
  2. Implementing Fuzzy TOPSIS on Project Risk Variable Ranking vol.2019, 2019, https://doi.org/10.1155/2019/9283409
  3. Shape and size optimization of trusses with dynamic constraints using a metaheuristic algorithm vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.747
  4. Optimization of cables size and prestressing force for a single pylon cable-stayed bridge with Jaya algorithm vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.853
  5. Performance of Jaya algorithm in optimum design of cold-formed steel frames vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.795
  6. Optimal truss sizing by modified Rao algorithm combined with feasible boundary search method vol.191, 2019, https://doi.org/10.1016/j.eswa.2021.116337