Advances in Computational Design

  • 제4권1호
  • /
  • Pages.15-32
  • /
  • 2019
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Sensitivity analysis based on complex variables in FEM for linear structures

  • Azqandi, Mojtaba Sheikhi (Department of Mechanical Engineering, Bozorgmehr University of Qaenat) ;
  • Hassanzadeh, Mahdi (Department of Mechanical Engineering, Islamic Azad University, Gorgan Branch, Kordkuy Center) ;
  • Arjmand, Mohammad (Department of Civil Engineering, Bozorgmehr University of Qaenat)
  • 투고 : 2017.09.21
  • 심사 : 2018.09.06
  • 발행 : 2019.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

One of the efficient and useful tools to achieve the optimal design of structures is employing the sensitivity analysis in the finite element model. In the numerical optimization process, often the semi-analytical method is used for estimation of derivatives of the objective function with respect to design variables. Numerical methods for calculation of sensitivities are susceptible to the step size in design parameters perturbation and this is one of the great disadvantages of these methods. This article uses complex variables method to calculate the sensitivity analysis and combine it with discrete sensitivity analysis. Finally, it provides a new method to obtain the sensitivity analysis for linear structures. The use of complex variables method for sensitivity analysis has several advantages compared to other numerical methods. Implementing the finite element to calculate first derivatives of sensitivity using this method has no complexity and only requires the change in finite element meshing in the imaginary axis. This means that the real value of coordinates does not change. Second, this method has the lower dependency on the step size. In this research, the process of sensitivity analysis calculation using a finite element model based on complex variables is explained for linear problems, and some examples that have known analytical solution are solved. Results obtained by using the presented method in comparison with exact solution and also finite difference method indicate the excellent efficiency of the proposed method, and it can predict the sustainable and accurate results with the several different step sizes, despite low dependence on step size.

키워드

참고문헌

  1. Anderson, W.K., Newman, J.C., Whitfield, D.L. and Nielsen, E.J. (2001), "Sensitivity analysis for Navier-stokes equations on unstructured meshes using complex variables", AIAA J., 39(1), 56-63. https://doi.org/10.2514/2.1270
  2. Bakshi, P. and Pandey, P., (2000), "Semi-analytical sensitivity using hybrid finite elements", Comput. Struct., 77(2), 201-213. https://doi.org/10.1016/S0045-7949(99)00206-0
  3. Beer, Johnston and DeWolf, J. (2002), Mechanics of Materials, 3rd, McGraw-Hill, New York, U.S.A.
  4. Cheng, G. and Olhoff, N. (1993), "New method of error analysis and detection in semi-analytical sensitivity analysis", Optimization of Large Structural Systems, 361-383.
  5. Cho, M. and Kim, H. (2005), "A refined semi-analytic design sensitivity based on mode decomposition and Neumann series", J. Numer. Methods Eng., 62(1), 19-49. https://doi.org/10.1002/nme.1163
  6. Cho, S. and Jung, H.S. (2003), "Design sensitivity analysis and topology optimization of displacement-loaded non-linear structures", Comput. Methods Appl. Mech. Eng., 192(22-24), 2539-2553. https://doi.org/10.1016/S0045-7825(03)00274-3
  7. Choi, K.K. (2005), Structural Sensitivity Analysis and Optimization 1: Linear Systems, Springer, New York, U.S.A.
  8. Chung, S.H., Kwon, Y.S., Park, S.J. and German, R.M. (2009), "Sensitivity analysis by the adjoint variable method for optimization of the die compaction process in particulate materials processing", Finite Elem. Anal. Des., 45(11), 836-844. https://doi.org/10.1016/j.finel.2009.06.020
  9. De Boer, H. and van Keulen, F. (2000), "Refined semi-analytical design sensitivities", Int. J. Solids Struct., 37(46), 6961-6980. https://doi.org/10.1016/S0020-7683(99)00322-4
  10. Deng, S. and Suresh, K. (2016), "Topology optimization under linear thermo-elastic buckling", International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Charlotte, North Carolina, August.
  11. Deng, S. and Suresh, K. (2017a), "Stress constrained thermo-elastic topology optimization with varying temperature fields via augmented topological sensitivity based level set", Struct. Multidiscip. O., 56(6), 1413-1427. https://doi.org/10.1007/s00158-017-1732-2
  12. Deng, S. and Suresh, K. (2017b), "Topology optimization under thermo-elastic buckling", Struct. Multidiscip. O, 55(5), 1759-1772. https://doi.org/10.1007/s00158-016-1611-2
  13. Deng, S., Suresh, K. and Joo, J. (2014), "Stress-constrained thermo-elastic topology optimization: A topological sensitivity approach", International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, New York, August.
  14. Ghoddosian, A. and Sheikhi, M. (2010), "Optimal design of structural support position for minimizing maximal bending moment by PSO with multi loads", J. Modeling Eng., 8(22), 59-68.
  15. Ghoddosian, A. and Sheikhi, M. (2013), Meta-heuristic Optimization Methods in Engineering, Semnan University Press, Iran.
  16. Gomez-Farias, A., Montoya, A. and Millwater, H. (2015), "Complex finite element sensitivity method for creep analysis", J. Pressure Vessels Piping, 132-133, 27-42. https://doi.org/10.1016/j.ijpvp.2015.05.006
  17. Hassanzadeh, M. (2016), "Computation of shape design sensitivities for linear FEM using modified semi-analytical method", Modares Mech. Eng., 15(11), 73-80.
  18. Lai, K.L. and Crassidis, J.L. (2008), "Extension of the first and second complex-step derivative approximations", J. Comput. Appl. Math., 219(1), 276-293. https://doi.org/10.1016/j.cam.2007.07.026
  19. Lund, E. and Olhoff, N. (1994), "Shape design sensitivity analysis of eigenvalues using "exact" numerical differentiation of finite element matrices", Struct. Optimization, 8(1), 52-59. https://doi.org/10.1007/BF01742934
  20. Lyness, J. (1967), "Numerical algorithms based on the theory of complex variable", ACM '67 Proceeding of the 22nd National Conference, Washington, DC, U.S.A., January.
  21. Lyness, J.N. and Moler, C.B. (1967), "Numerical differentiation of analytic functions", SIAM Journal on Numerical Analysis, 4(2), 202-210. https://doi.org/10.1137/0704019
  22. Olhoff, N., Rasmussen, J. and Lund, E. (1993), "A Method of "Exact" Numerical Differentiation for Error Elimination in Finite-Element-Based Semi-Analytical Shape Sensitivity Analyses", J. Struc. Mech., 21(1), 1-66. https://doi.org/10.1080/08905459308905180
  23. Oral, S. (1996), "An improved semi-analytical method for sensitivity analysis", Struct. Optimization, 11(1-2), 67-69. https://doi.org/10.1007/BF01279659
  24. Rodriguez, D. (2000), "A multidisciplinary optimization method for designing inlets using complex variables", 8th Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September.
  25. Squire, W. and Trapp, G. (1998), "Using complex variables to estimate derivatives of real functions", Siam Review, 40(1), 110-112. https://doi.org/10.1137/S003614459631241X
  26. van Keulen, F. and De Boer, H. (1998), "Refined semi-analytical design sensitivities for buckling", the 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, U.S.A., September.
  27. van Keulen, F. and De Boer, H. (1998), "Rigorous improvement of semi-analytical design sensitivities by exact differentiation of rigid body motions", Int. J. Numer. Methods Eng., 42(1), 71-91. https://doi.org/10.1002/(SICI)1097-0207(19980515)42:1<71::AID-NME350>3.0.CO;2-C
  28. van Keulen, F., Haftka, H.M. and Kim, N.H. (2005), "Review of options for structural design sensitivity analysis, part 1: Linear systems", Comput. Method Appl. Mech. Eng., 194(30-33), 3213-3234. https://doi.org/10.1016/j.cma.2005.02.002
  29. Vatsa, V.N. (2000), "Computation of sensitivity derivatives of Navier-Stokes equations using complex variables", Adv. Eng. Software, 31(8), 655-659. https://doi.org/10.1016/S0965-9978(00)00025-9
  30. Voorhees, A., Millwater, H. and Bagley, R. (2011), "Complex variable methods for shape sensitivity of finite element models", Finite Elem. Anal. Des., 47(10), 1146-1156. https://doi.org/10.1016/j.finel.2011.05.003
  31. Voorhees, A., Millwater, H., Bagley, R. and Golden, P. (2012), "Fatigue sensitivity analysis using complex variable methods", J. Fatigue, 40, 61-73. https://doi.org/10.1016/j.ijfatigue.2012.01.016