한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

레이저 소결 적층 시스템과 실험 계획법을 이용한 3차원 바이오 세라믹 인공지지체의 제작

Fabrication of 3D Bioceramic Scaffolds using Laser Sintering Deposition System and Design of Experiment

  • 투고 : 2018.09.13
  • 심사 : 2019.10.02
  • 발행 : 2019.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, we developed a novel laser sintering deposition system (LSDS) based on solid free-form fabrication (SFF) technology as it has the potential to fabricate complex geometries with controllable architecture for bone tissue engineering applications. The 3D biphasic calcium phosphate (BCP) scaffolds were fabricated with a pore size of 800㎛, a line width and height of 1000㎛, and an overall size of 8.2×8.2×8.0 mm3 according to the design of experiment (DOE) results. Additionally, an optimized manufacturing process using response surface analysis was established to fabricate 3D BCP scaffolds. The fabricated 3D BCP scaffolds were sintered at 950℃, 1050℃, 1150℃, and 1250℃ according to sintering processes with a furnace. As the sintering temperature increased, the porosity increased. Through the compressive strength test, the 3D BCP scaffolds sintered at 1050℃ presented good results of about 0.76 MPa. These results suggest that fabrication methods for 3D bioceramic scaffolds using LSDS may meet the basic requirements for bone tissue engineering.

키워드

참고문헌

  1. Stok, J. V., Lieshout, E. M. M. V., Massoudi, Y. E., Kralingen, G. H. V., and Patka, P., "Bone substitutes in the Netherlands-a Systematic Literature Review," Acta Biomater., Vol. 7, No. 2, pp. 739-750, 2010. https://doi.org/10.1016/j.actbio.2010.07.035
  2. Duan, B., and Wang, M., "Customized Ca-P/PHBV Nanocomposite Scaffolds for Bone Tissue Engineering: Design, Fabrication, Surface Modification and Sustained Release of Growth Factor," Journal of the Royal Society Interface, Vol. 7, No. 5, pp. S615-S629, 2010.
  3. Sun, W., and Lal, P., “Recent Development on Computer Aided Tissue Engineering-a Review,” Computer Methods and Programs in Biomedicine, Vol. 67, No. 2, pp. 85-103, 2002. https://doi.org/10.1016/S0169-2607(01)00116-X
  4. Williams, J. M., Adebisi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., and Das, S., “Bone Tissue Engineering using Polycaprolactone Scaffolds Fabricated via Selective Laser Sintering,” Biomaterials, Vol. 26, No. 23, pp. 4817-4827, 2005. https://doi.org/10.1016/j.biomaterials.2004.11.057
  5. Baino, F., and Brovarone, C. V., “Three-dimensional Glass-derived Scaffolds for Bone Tissue Engineering: Current Trends and Forecasts for the Future,” Journal of biomedical materials research Part A, Vol. 97, No. 4, pp. 514-535, 2011. https://doi.org/10.1002/jbm.a.33072
  6. Rezwan, K., Chen, Q. Z., Blaker, J. J., and Boccaccini, A. R., “Biodegradable and Bioactive Porous Polymer/inorganic Composite Scaffolds for Bone Tissue Engineering,” Biomaterials, Vol. 27, No. 18, pp. 3413-3431, 2006. https://doi.org/10.1016/j.biomaterials.2006.01.039
  7. Hutmacher, D. W., Sittinger, M., and Risbud, M. V., “Scaffold Based Tissue Engineering : Rational for Compute Solid Free-form Fabrication System,” TRENDS in Biotechnology, Vol. 22, No. 7, pp. 354, 2004. https://doi.org/10.1016/j.tibtech.2004.05.005
  8. Miranda, P., Saiz, E., Gryn, K., and Tomsia, A. P., “Sintering and Robocasting of ${\beta}$-tricalcium Phosphate Scaffolds for Orthopaedic Applications,” Acta Biomaterialia, Vol. 2, No. 4, pp. 457, 2006. https://doi.org/10.1016/j.actbio.2006.02.004
  9. Tay, B. Y., Evans, J. R. G., and Edirisinghe, M. J., “Solid Freeform Fabrication of Ceramics,” International Materials Reviews, Vol. 48, No. 6, pp. 341-370, 2003. https://doi.org/10.1179/095066003225010263
  10. Sa, M. W., Lee, C. H., and Kim, J. Y., “Fabrication of Nanofiber-Combined 3D Scaffolds using Dual-Head Deposition Technology,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 108-115, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.108
  11. Jang, J. A., and Cho, D. W., “A Review of Fabrication of Soft Structures with Three-dimensional Printing Technology,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 142-148, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.142
  12. Shin, H. M., Yoon, S. C., and Choi, H. W., "Optimum Design and Characterization of F-Theta Lens by a 3D Printer(I)," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 43-48, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.043
  13. Sa, M. W., and Kim, J. Y., "Process Development of 3D Bio-ceramic Scaffolds using Additive Manufacturing Technology," Trans, Korean Soc. Mech. Eng., pp. 3013-3017, 2017.
  14. Feng, P., Niu, M., Gao, C., Peng, S., and Shuai, C., "A Novel Two-step Sintering for Nano-hydroxyapatite Scaffolds for Bone Tissue Engineering," Scientific Reports, No. 4, pp. 5599, 2014.