한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제22권6호
  • /
  • Pages.754-762
  • /
  • 2019
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

역설계 기반의 군용 특수 트럭용 중간변속기 개발에 관한 연구

A Research on Development of Transfer Case for Military Special Trucks based the Reverse Engineering

  • 김원재 (국방기술품질원 기동화력센터 기동화력기술팀) ;
  • 문태상 (국방기술품질원 기동화력센터 기동화력기술팀) ;
  • 이일랑 (국방기술품질원 기동화력센터 기동화력기술팀) ;
  • 이재우 (신정개발특장차(주) 기술연구소) ;
  • 나경운 (신정개발특장차(주) 기술연구소)
  • Kim, Won-Jae (Land Systems Engineering Team, Defence Agency for Technology and Quality) ;
  • Moon, Tae-Sang (Land Systems Engineering Team, Defence Agency for Technology and Quality) ;
  • Yi, Il-Lang (Land Systems Engineering Team, Defence Agency for Technology and Quality) ;
  • Lee, Jae-Woo (R&D Center, Shinjeong Development CO., Ltd) ;
  • Na, Kyeong-Woon (R&D Center, Shinjeong Development CO., Ltd)
  • 투고 : 2019.06.07
  • 심사 : 2019.10.11
  • 발행 : 2019.12.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The transfer case for special truck are usually produced by only a few specialized companies. The special technical data are not unveiled. In order to complete the development successfully, it is necessary to carry out the compatibility tests such as the running test on the vehicle, which is the test condition of the military vehicle. In this research, transfer case the core-component of the '230 mm K-MLRS' has been developed with the reverse engineering and the prototype is developed through structural analysis. The transfer case developed through this research is currently used in the '230 mm K-MLRS'. The development process In this research are useful in the development of similar products.

키워드

참고문헌

  1. Lee, B. K., and Cho, Y. K., "Priority Decision based on Users' Requirements for the Development of Military Vehicles," Transactions of the Korean Society of Automotive Engineers, Vol. 18, No. 6, pp. 122-129, 2010.
  2. Command, U. A. M., "Engineering Design Handbook, Automotive Series, the Automotive Assembly," AMCP Amphlet AMCP, pp. 306-355, 1965.
  3. Kwon, J. H., and Oh, T. I., "An Experimental Study on a Full Timer Four Wheel Drive Vehicle," Transaction of the Korean Society of Automotive Engineers, Vol. 7, No. 2, pp. 242-252, 1999.
  4. Kim, D. S., "A Study on the Reliability Evaluation of Transfer Case for Special Truck," Journal of Reliability and Applications Society of Korea, Vol. 18, No. 4, pp. 313-323, 2018. https://doi.org/10.33162/JAR.2018.12.18.4.313
  5. Korea Reliability Certification Center, "Transfer Case for Special Truck," RS-KORAS-KIMM-230, 2016.
  6. Suh, K. H. et al., "Durability Analysis of a Large-Sized Military Truck Using Virtual Test Lab," Transactions of the Korean Society of Automotive Engineers, Vol. 19, No. 3, pp. 57-64, 2011.
  7. Shinjeong Development Co, Fork Shaft Assembly for Intermediate Transmission, KR Patent 1020160114098, Filed September 5, 2016, and Issued August 18, 2017.
  8. Korea Reliability Certification Center, "Reliability for Special Truck," RS-B-0223, 2008.
  9. Korea Reliability Certification Center, "Transfer Case for Special Truck," RS-KORAS-KIMM-230, 2016.
  10. MIL-STD-801F, "Environmental Engineering Considerations and Laboratory Tests," Department of USA, 2000.
  11. KDS 2320-4012, "TRUCK, FLATBED," Korea Defence Standard, 2015.
  12. KDS 1055-4003, "LAUNCHER, ROCKET," Korea Defence Standard, 2015.