Structural Engineering and Mechanics

  • 제69권1호
  • /
  • Pages.77-93
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural performance of recycled aggregates concrete sourced from low strength concrete

  • Goksu, Caglar (Istanbul Technical University, Civil Engineering Faculty) ;
  • Saribas, Ilyas (Istanbul Technical University, Civil Engineering Faculty) ;
  • Binbir, Ergun (Istanbul Technical University, Civil Engineering Faculty) ;
  • Akkaya, Yilmaz (Istanbul Technical University, Civil Engineering Faculty) ;
  • Ilki, Alper (Istanbul Technical University, Civil Engineering Faculty)
  • 투고 : 2018.03.21
  • 심사 : 2018.11.22
  • 발행 : 2019.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Although much research has been carried out using recycled aggregates sourced from normal strength concrete, most of the buildings to be demolished are constructed with low strength concrete. Therefore, the properties of the concrete incorporating recycled aggregates, sourced from the waste of structural elements cast with low strength concrete, were investigated in this study. Four different concrete mixtures were designed incorporating natural and recycled aggregates with and without fly ash. The results of the mechanical and durability tests of the concrete mixtures are presented. Additionally, full-scale one-way reinforced concrete slabs were cast, using these concrete mixtures, and subjected to bending test. The feasibility of using conventional reinforced concrete theory for the slabs made with structural concrete incorporating recycled aggregates was investigated.

키워드

과제정보

연구 과제 주관 기관 : The Scientific and Technological Research Council of Turkey

참고문헌

  1. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Comp., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9
  2. ASTM C114-05 (2005), Standard Test Methods for Chemical Analysis of Hydraulic Cement, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  3. ASTM C1202 (2017), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  4. ASTM C1260 (2014), Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  5. ASTM C234 (1991), Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  6. ASTM D422-63 (2007), Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, PA.
  7. ASTM C597 (2002), Standard Test Method for Pulse Velocity through Concrete, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  8. Attaullah, S., Irfan, U., Raza U.K and Ehsan, U.Q. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struc. Eng. Mech., 47(4), 545-557. https://doi.org/10.12989/sem.2013.47.4.545
  9. Baker, A. (1956), Ultimate Load Theory Applied to the Design of Reinforced and Prestressed Concrete Frames, Concrete Publications Ltd., London, U.K.
  10. Bamforth, P.M. (1999), "The derivation of input data for modelling chloride ingress from eight-year uk coastal exposure trials", Mag. Conc. Res., 51(2), 87-96. https://doi.org/10.1680/macr.1999.51.2.87
  11. Corinaldesi, V. (2010), "Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates", Constr. Build. Mater., 24(9), 1616-1620. https://doi.org/10.1016/j.conbuildmat.2010.02.031
  12. Cosgun, C., Comert, M., Demir, C. and Ilki, A. (2012), "FRP retrofit of a full-scale 3D RC frame", Proceedings of the 6th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, Rome, Italy.
  13. De Brito, J., Ferreira, J., Pacheco, J., Soares, D. and Guerreiro, M. (2016), "Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete", J. Build. Eng., 61-16. https://doi.org/10.1016/j.jobe.2017.10.012
  14. Fathifazl, G., Fazaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B. and Foo, S. (2011), "Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate", Cement Concrete Comp., 33(10), 1026-1037. https://doi.org/10.1016/j.cemconcomp.2011.08.004
  15. Fathifazl, G. and Razaqpur, A.G. (2013), "Creep rheological models for recycled aggregate concrete", ACI Mater. J., 110(2), 115-126.
  16. fib (Federation International du Beton/International Federation for Structural Concrete), (2010), Model Code 2010, Lausanne, Switzerland.
  17. Francesconi, L., Pani, L. and Stochino, F. (2016), "Punching shear strength of reinforced recycled concrete slabs", Constr. Build. Mater., 127, 248-263. https://doi.org/10.1016/j.conbuildmat.2016.09.094
  18. Garg, P., Singh, H. and Walia, B.S. (2013), "Optimum size of recycled aggregate", GE-Int. J. Eng. Res., 35-41.
  19. Ghatte, H.F., Comert, M., Demir, C. and Ilki, A. (2016), "Evaluation of FRP confinement models for substandard rectangular RC columns based on full-scale reversed cyclic lateral loading tests in strong and weak directions", Polym., 8(323), 1-24. https://doi.org/10.3390/polym8010001
  20. Gomez, J.M.V. (2002a), "Shrinkage of concrete with replacement of aggregate with recycled concrete aggregate", ACI Spec. Publ., 209, 475-496.
  21. Gomez, J.M.V. (2002b), "Creep of concrete with substitution of normal aggregate by recycled concrete aggregate", ACI Spec. Publ., 209, 461-474.
  22. Gonçalves, P. and De Brito, J. (2009), "Recycled aggregate concrete (RAC)-comparative analysis of existing specifications", Mag. Concrete Res.
  23. Hansen, T.C. (1992), Recycling of Demolished Concrete and Masonry, E&FN SPON, London, U.K.
  24. Hasan, N.K., Nasim, K.S. and Khaled, H.H. (2017), "Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement", Struct. Eng. Mech., 62(3), 357-364. https://doi.org/10.12989/sem.2017.62.3.357
  25. Henschen, J., Teramoto, A. And Lange, D.A. (2012), "Shrinkage and creep performance of recycled aggregate concrete", Proceedings of the 7th RILEM International Conference on Cracking in Pavements, the Netherlands.
  26. Ho, N.Y., Lee, Y.P.K., Lim, W.F., Zayed, T., Chew, K.C., Low, G.L. and Ting, S.K. (2013), "Efficient utilization of recyceled concrete aggregate in structural concrete", J. Mat. Civil Eng., 25(3), 318-327. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000587
  27. Ilki, A. And Celep, Z. (2012), "Earthquakes, existing buildings, and seismic design codes in Turkey", Arab. J. Sci. Eng., 37(2), 365-380. https://doi.org/10.1007/s13369-012-0183-8
  28. Jones, R. and Facaoaru, I. (1969), "Recommendations for testing concrete by the ultrasonic pulse method", Mat. Str. (RILEM) 2(10), 275-284.
  29. Khalaf, F.M. and DeVenny, A.S. (2004), "Recycling of demolished masonry rubble as coarse aggregate in concrete: Review", ASCE J. Mater. Civil Eng., 16(4), 331-340. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:4(331)
  30. Kou, S.C., Poon, C.S. and Wan, H.W. (2012), "Properties of concrete prepared with low-grade recycled aggregates", Constr. Build. Mater., 36, 881-889. https://doi.org/10.1016/j.conbuildmat.2012.06.060
  31. Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004), "Performance of recycled concrete aggregate", Proceedings of the International Symposium on Environmental-Conscious Materials and Systems for Sustainable Development, Koriyama, Japan.
  32. Lopez-Gayarre, F., Serna, P., Domingo-Cabo, A., Serrano-Lopez, M.A. and Lopez-Colina, C. (2009), "Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties", Waste Mng., 29(12), 3022-3028. https://doi.org/10.1016/j.wasman.2009.07.010
  33. Malesev, M., Radonjanin, V. and Marinkovic, S. (2010), "Recycled concrete as aggregate for structural concrete production", Sustainab., 2(5), 1204-1225. https://doi.org/10.3390/su2051204
  34. Marceau, M.L., Gajda, J. and Van Geem, M.G. (2002), Use of Fly Ash in Concrete: Normal and High Volume Ranges, PCA R&D Serial No. 2604, Portland Cement Association, Skokie, Illinois.
  35. Marsh, B.K., Day R.L. and Bonner, D.G. (1985), "Pore structure characteristics affecting the permeability of cement paste containing fly ash", Cement Concrete Res., 15(6), 1027-1038. https://doi.org/10.1016/0008-8846(85)90094-8
  36. Mattock, A.H. (1967), "Discussion of 'rotational capacity of reinforced concrete beams", J. Struct. Div., 93(ST2), 519-522. https://doi.org/10.1061/JSDEAG.0001678
  37. Michaud, K., Hoult, N., Lotfy, A. and Lum, P. (2016), "Performance in shear of reinforced concrete slabs containing recycled concrete aggregate", Mater. Struct., 49(10), 4425-4438. https://doi.org/10.1617/s11527-016-0798-4
  38. Ngala, V.T., Page, C.L., Parrott L.J. and Yu, S.W. (1995), "Diffusion in cementitious materials: ii further investigations of chloride and oxygen diffusion in well-cured opc and opc/30%pfa pastes", Cement Concrete Res., 25(4) 819-826.
  39. Pacheco Torgal, F., Tam, V.W.Y., Labrincha, J.A., Ding Y. and De Brito, J. (2013), Handbook of Recycled Concrete and Demolition Waste, Woodhead Publishing Limited.
  40. Page, C.L., Short, N.R. and El Tarras, A. (1981), "Diffusion of chloride ions in hardened cement pastes", Cement Concrete Res., 11(3) 395-406. https://doi.org/10.1016/0008-8846(81)90111-3
  41. Palaniraj, S. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 705-711.
  42. Poon, C.S., Shui, Z.H. and Lam, L. (2004), "Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates", Constr. Build. Mater., 18(6), 461-468. https://doi.org/10.1016/j.conbuildmat.2004.03.005
  43. Rahal, K. (2007), "Mechanical properties of concrete with recycled coarse aggregate", Build. Environ., 42(1), 407-415. https://doi.org/10.1016/j.buildenv.2005.07.033
  44. Rakshvir, M. and Barai, S.V. (2006), "Studies on recycled aggregates based concrete", Waste Mng. Res., 24(3), 225-233. https://doi.org/10.1177/0734242X06064820
  45. Rao, H.S., Reddy, V.S.K. and Ghorpade, V.G. (2012), "Influence of recycled coarse aggregate on punching behaviour of recycled coarse aggregate concrete slabs", Int. J. Mod. Eng. Res., 2(4), 2815-2820.
  46. Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 205-220. https://doi.org/10.1617/s11527-010-9620-x
  47. Rise, N., De Brito, J., Correia, J.R. and Arruda, M.R.T. (2015), "Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates", Eng. Struct., 100, 238-248. https://doi.org/10.1016/j.engstruct.2015.06.011
  48. Sanchez, M. and Gutierrez, P.A. (2004), "Influence of recycled aggregate quality on concrete properties", Proceeding of the International RILEM Conference: The Use of Recycled Materials in Building and Structures, Barcelona, Spain.
  49. Schubert, S., Hoffmann, C., Leemann, A., Moser, K. and Motavalli, M. (2012), "Recycled aggregate concrete: Experimental shear resistance of slabs without shear reinforcement", Eng. Struct., 41, 490-497. https://doi.org/10.1016/j.engstruct.2012.04.006
  50. Shayan, A. And Xu, A. (2003), "Performance and properties of structural concrete made with recycled concrete aggregate", ACI Mat. J., 100(5), 371-380.
  51. Silva, R.V., DeBrito, J. and Dhir, R.K. (2015), "Prediction of the shrinkage behavior of recycled aggregate concrete: A review", Constr. Build. Mater., 77, 327-339. https://doi.org/10.1016/j.conbuildmat.2014.12.102
  52. Sim, J. and Park, C. (2011), "Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate", Waste Mng., 31(11), 2352-2360. https://doi.org/10.1016/j.wasman.2011.06.014
  53. Tangchirapat, W., Buranasing, R. and Jaturapitakkul, C. (2010), "Use of high fineness of fly ash to improve properties of recycled aggregate concrete", J. Mater. Civil Eng., 22(6), 565-571. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000054
  54. Tapan, M., Comert, M., Demir, C., Sayan, Y., Orakcal, K. and Ilki, A. (2013), "Failures of structures during the October 23, 2011 Tabanli (Van) and November 9, 2011 Edremit (Van) earthquakes in Turkey", Eng. Fail. Analy., 34, 606-628. https://doi.org/10.1016/j.engfailanal.2013.02.013
  55. Thomas, C., Setien, J. and Polanco, J.A. (2016), "Structural recycled aggregate concrete made with precast wastes", Constr. Build. Mater., 114, 536-546. https://doi.org/10.1016/j.conbuildmat.2016.03.203
  56. Thomas, M. (2007), Optimizing the Use of Fly Ash in Concrete, PCA, 24.
  57. Thomas, M.D.A. (1989), "The effect of curing on the hydration and pore structure of hardened cement paste containing pulverized-fuel ash", Adv. Cement Res., 2(8), 181-188 https://doi.org/10.1680/adcr.1989.2.8.181
  58. Thomas, M.D.A. (2004), Prevention of Reinforcement Corrosion in Concrete Structures. Part i: Carbonation-Induced Corrosion, Canadian Civil Engineer: Special Issue on Durability of Concrete Structures, 22-25.
  59. Thomas, M.D.A., Mukherjee, P.K., Sato, J.A. and Everitt, M.F. (1995), "Effect of fly ash composition on thermal cracking in concrete", Proceedings of the 5th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, ACI SP-153, American Concrete Institute, Detroit, Michigan, U.S.A.
  60. Thomas, M.D.A., Shehata, M. and Shashiprakash, S.G. (1999), "The use of fly ash in concrete: Classification by composition", Cement Concrete Agg., 12(2), 105-110.
  61. Thomas, M.D.A. and Wilson, M.L. (2002), Supplementary Cementing Materials for Use in Concrete, CD038, PCA, Skokie, IL.
  62. TS EN 1097-2 (2010), Tests for Mechanical and Physical Properties of Aggregates-Part 2: Methods for the Determination of Resistance to Fragmentation, Turkish Standards Institute, Ankara, Turkey.
  63. TS EN 1097-6 (2013), Tests for Mechanical and Physical Properties of Aggregates-Part 6: Determination of Particle Density and Water Absorption, Turkish Standards Institute, Ankara, Turkey.
  64. TS EN 12390-3 (2002), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
  65. TS EN 12390-5 (2002), Testing Hardened Concrete-Part 5: Flexural Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
  66. TS EN 12390-6 (2002), Testing Hardened Concrete-Part 6: Tensile Splitting Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
  67. TS EN 1367-2 (2011), Tests for Thermal and Weathering Properties of Aggregates-Part 2: Magnesium Sulfate Test, Turkish Standards Institute, Ankara, Turkey.
  68. TS EN 1367-4 (2009), Tests for Thermal and Weathering Properties of Aggregates Part 4: Determination of Drying Shrinkage, Turkish Standards Institute, Ankara, Turkey.
  69. TS EN 1744-1 (2013), Tests for Chemical Properties of Aggregates-Part 1: Chemical Analysis, Turkish Standards Institute, Ankara, Turkey.
  70. TS EN 933-1 (2012), Tests for Geometrical Properties of Agregates-Part 1: Determination of Particle Size Distribution Sieving Method, Turkish Standards Institute, Ankara, Turkey.
  71. TS EN 933-3 (2012), Test for Geometrical Properties of Aggregates-Part 2: Determination of Particle Size Distribution-Test Sieves, Nominal Size of Apartures, Turkish Standards Institute, Ankara, Turkey.
  72. TS EN 933-4 (2009), Tests for Geometrical Properties of Aggregates-Part 4: Determination of Particle Shape - Shape Index, Turkish Standards Institute, Ankara, Turkey.
  73. TS EN 933-9 (2010), Tests for geometrical properties of aggregates-Part 9: Assessment of fines - methylene blue test, Turkish Standards Institute, Ankara, Turkey.
  74. Turkish Seismic Design Code (TSDC) (2017), Regulations for Buildings to be Constructed in Earthquake Prone Areas, Ankara, Turkey.
  75. Urban Transformation Act, 06/05/2012-6306 (2012), The Law of Transformation of Areas Under the Disaster Risk, Republic of Turkey Ministry of Environment and Urbanization, Ankara, Turkey.
  76. Vyas, C.M. and Bhatt, D.R. (2013), "Evaluation of modulus of elasticity for recycled coarse aggregate concrete", Int. J. Eng. Sci. Innov. Technol., 2(1), 26.
  77. Xiao, J., Li, L., Tam, V.W. and Li, H. (2014), "The state of the art regarding the long-term properties of recycled aggregate concrete", Struct. Conc., 15(1), 3-12. https://doi.org/10.1002/suco.201300024
  78. Xiao, J., Li, W., Sun, Z. and Shah, S.P. (2012), "Crack propagation in recycled aggregate concrete under uniaxial compressive loading, ACI Mater. J., 109(4), 451-462.
  79. Xiao, J., Sun, C. And Jiang, X. (2015), "Flexural behaviour of recycled aggregate concrete graded slabs", Struct. Concrete, 16(2), 249-261. https://doi.org/10.1002/suco.201400008
  80. XTRACT 3.0.8 (Computer software), Rancho Cordova, CA, TRC.
  81. Yang, K.H., Chung, H.S. and Ashour, A. (2008), "Influence of type and replacement level of recycled aggregates on concrete properties", ACI Mater. J., 3, 289-296.
  82. Yehia, S., Khan, S. and Abudayyeh, O. (2008), "Evaluation of mechanical properties of recycled aggregate for structural applications", HBRC J., 4(3), 7-16.
  83. Zhou, J.H., Wang, X.B. and Yu, T.H. (2008), "Mechanic behavior test on recycled concrete simply-supported rectangular slabs", J. Shenyang Jianzhu Univ. Nat. Sci., 24(3), 41-415.

피인용 문헌

  1. Numerical analysis of hysteretic behavior for RAC structure under earthquake loading vol.18, pp.4, 2019, https://doi.org/10.1080/13467581.2019.1645671
  2. Compressive Mechanical Properties of a Novel Recycled Aggregate Concrete with Recycled Lightweight Aggregate vol.2021, 2019, https://doi.org/10.1155/2021/2134082