Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Thermal stress analysis around a cavity on a bimetal

  • Baytak, Tugba (Faculty of Civil Engineering, Istanbul Technical University) ;
  • Bulut, Osman (Faculty of Civil Engineering, Istanbul Technical University)
  • Received : 2018.08.06
  • Accepted : 2018.11.19
  • Published : 2019.01.10
⟨ Previous Next ⟩

Abstract

The plates made of two materials joined to each other having the different coefficient of thermal expansions are frequently encountered in the industrial applications. The stress analysis of these members under the effect of high-temperature variation has great importance in design. In this study, the stress analysis of the experimental model developed for the problem considered here was performed by the method of photothermoelasticity. The thermal strains were formed by the mechanical way and these were fixed by the strain freezing method. For the stress measurements, the method of slicing is applied which provides three-dimensional stress analysis. The analytical solution in the literature was compared with the related stress distribution obtained from the model. Moreover, the axisymmetric finite element model developed for the problem was solved by ABAQUS and the results obtained here compared with those of the experimental model and the analytical solution. As a result of this study, this experimental method and numerical model can be used for these type of thermal stress problems which have not been comprehensively analyzed yet.

Keywords

Acknowledgement

Supported by : Istanbul Technical University (ITU)

References

  1. Abdulaliyev, Z., Ataoglu, S., Bulut, O. and Kayali, E.S. (2010), "Three-dimensional stress state around corrosive cavities on pressure vessels", J. Press. Vess. Technol., 132(2), 021204. https://doi.org/10.1115/1.4000508
  2. Abdulaliyev, Z., Ataoglu, S. and Guney D. (2007), "Thermal stresses in butt-jointed thick plates from different materials", Weld. J., 86(7), 201s-204s.
  3. Abdulaliyev, Z., Bakioglu, M., Ataoglu, S., Kurtkaya, Z. and Gulluoglu A.N. (2012), "Thermal stress concentration in plates from different materials", J. Aircraft, 49(3), 941-946. https://doi.org/10.2514/1.C031661
  4. Ayatollahi, M.R., Mirsayar, M.M. and Dehghany, M. (2011), "Experimental determination of stress field parameters in bi-material notches using photoelasticity", Mater. Des., 32(10), 4901-4908. https://doi.org/10.1016/j.matdes.2011.06.002
  5. Bakioglu, M., Abdulaliyev, Z., Bulut, O. and Ataoglu, S. (2011), "Thermal stress intensity factor in plane problems", Proceedings of the 9th International Fracture Conference, Istanbul, Turkey, October.
  6. Boley, B.A. and Weiner, J.H. (1997), Theory of Thermal Stresses, Dover Publications, New York, U.S.A.
  7. Bulut, O. (2018), "The thermal stress analysis around the cavities in composite plates used for the body of reactors", J. Fac. Eng. Archit. Gaz., 18(2).
  8. Chama, M., Boutabout, B., Lousdad, A., Bensmain, W. and Bouiadjra, B.A.A. (2014), "Crack propagation and deviation in bi-materials under thermos-mechanical loading", Struct. Eng. Mech., 50(4), 441-457. https://doi.org/10.12989/sem.2014.50.4.441
  9. Dang, H.Y., Zhao, M.H., Fan, C.Y. and Chen, Z.T. (2016), "Analysis of an arbitrarily shaped interface crack in a three-dimensional isotropic thermal elastic bi-material. Part 2: Numerical method", Int. J. Sol. Struct., 99, 48-56. https://doi.org/10.1016/j.ijsolstr.2016.08.007
  10. Dave, J.M. and Dharmendr, S.S. (2018) "Stress field around rectangular hole in functionally graded plate", Int. J. Mech. Sci., 136, 360-370. https://doi.org/10.1016/j.ijmecsci.2017.12.010
  11. Demir, E., Callioglu, H. and Sayer, M. (2017), "Elasto-plastic thermal stress analysis of functionally graded hyperbolic discs", Struct. Eng. Mech., 62(5), 587-593. https://doi.org/10.12989/sem.2017.62.5.587
  12. Durelli, A.J., Phillips, E.A. and Tsao, C.H. (1958), Introduction to the Theoretical and Experimental Analysis of Stress and Strain, Mc.Graw-Hill, New York, U.S.A.
  13. Frocht, M.M. (1947), Photoelasticity, Wiley, New York, U.S.A.
  14. Ikeda, T. and Sun, C.T. (2001), "Stress intensity factor analysis for an interface crack between dissimilar isotropic materials under thermal stress", Int. J. Fract., 111(3), 229-249. https://doi.org/10.1023/A:1012208409795
  15. Kucukarslan, S. (2003), "The stress model of PB-SN solders", Sakarya Univ. J. Sci., 7(3), 173-178.
  16. Ozisik, G. and Genc, M.S. (2008), "Temperature and thermal stress distribution in a plate heated from one side surface with a moving heat source", J. Fac. Eng. Archit. Gaz., 23(3), 601-610.
  17. Sakaue, K., Yoneyama, S., Kikuta, H. and Takashi, M. (2008), "Evaluating crack tip stress field in a thin glass plate under thermal load", Eng. Fract. Mech., 75(5), 1015-1026. https://doi.org/10.1016/j.engfracmech.2007.04.025
  18. Simon, B.N., Prasath, R.G.R. and Ramesh, K. (2009), "Transient thermal stress intensity factors of bimaterial interface cracks using refined three-fringe photoelasticity", J. Strain Anal. Eng. Des., 44(6), 427-438. https://doi.org/10.1243/03093247JSA506
  19. Su, Z., Xie, C. and Tang, Y. (2018), "Stress distribution analysis and optimization for composite laminate containing hole of different shapes", Aerosp. Sci. Technol., 76, 466-470. https://doi.org/10.1016/j.ast.2018.01.046
  20. Timoshenko, S.P. and Goodier, J.N. (1970), Theory of Elasticity, International Edition, McGraw Hill, Singapore.
  21. Zhao, M.H., Dang, H.Y., Fan, C.Y. and Chen, Z.T. (2016), "Analysis of an arbitrarily shaped interface cracks in a three dimensional isotropic thermoelastic bi-material Part 1: Theoretical solution", Int. J. Sol. Struct., 97, 168-181. https://doi.org/10.1016/j.ijsolstr.2016.07.032