DOI QR코드

DOI QR Code

동작 주파수에 따른 Dk의 변화가 임피던스 부정합에 미치는 영향

Effects on Impedance Mismatch by Dk Variation with Operating Frequency

  • 투고 : 2019.12.28
  • 심사 : 2019.12.30
  • 발행 : 2019.12.31

초록

PCB (Printed Circuit Board)를 설계할 때 정확한 재료 정보는 매우 중요하다. 전투함의 통합 마스트 (Integrated Mast)에서는 스텔스 기능을 위해 열 저감이 필수적이며 이를 위해서는 내부의 제어 장치에서 발생하는 열을 최대한 줄여야 한다. 제어 장치는 대부분 PCB로 이루어져 있으나 PCB의 유전상수 (Dk, Dielectric Constant)가 정확하게 알려져 있지 않아 임피던스 부정합이 발생하며 이는 열 발생을 매우 증가시킨다. 본 논문에서는 Dk의 측정 방법에 대해 살펴보고 동작 주파수에 따른 Dk 값의 변화가 임피던스 부정합에 미치는 영향을 살펴본다.

Accurate material information is very important in PCB (Printed Circuit Board) design. In an integrated mast of a battleship, heat reduction is essential for stealth functionality. So heat dissipation from internal control equipments should be reduced as much as possible. Control equipments mostly consist of PCBs, but it often suffers from impedance mismatching due to imprecise Dk (Dielectric Constant), which significantly increases heat dissipation. In this paper, measurement methods of Dk is investigated. Also, effects on impedance mismatch by Dk variation with operating frequency is investigated.

키워드

참고문헌

  1. H. Shin, S. Lee, D. Park, J. Shin, M. Chung, S. Park, and Y. Park, "Analysis of Radar Cross Section of the Integrated Mast Module for Battleship," The Journal of Korean Institute of Electromagnetic Engineering and Science, vol.28, no.7, pp.584-587, 2017. DOI: 10.26866/jees.2017.17.4.238
  2. C. Kim and S. Lee, "Ultra-High-Speed PCB Design Methods," j.inst.Korean.electr.electron.eng, vol.22, no.3, pp.882-885, 2018. DOI: 10.7471/ikeee.2018.22.3.882
  3. S. Kim, S. Lee, J. Yang, and D. Park, "Analysis of Thermal Properties in LED Package by Via-hole and Dimension of FR4 PCB," Journal of KIEEME, vol.24, no.3, pp.234-239, 2011. DOI: 10.4313/JKEM.2011.24.3.234
  4. "DS-7408," http://www.srpcb.com/bbs/download.php?no=73&name=DS-7408.pdf
  5. "IPC TM-650 Test Methods Manual," http://www.ipc.org/test-methods.aspx
  6. "Permittivity and Loss Tangent, Parallel Plate, 1MHz to 1.5 GHz," http://www.ipc.org/TM/2.5.5. 9.pdf
  7. "Test Methods to Determine the Amount of S ignal Loss on Printed Boards," http://www.ipc.org/TM/2.5.5.12A.pdf
  8. "Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates," https://www.astm.org/Standards/D3380.htm