DOI QR코드

DOI QR Code

Development of a New Modeling Technique to Simulate 3-dimensional Electroplating System Considering the Effects of Fluid Flow

  • Lim, Kyung-Hwan (Department of Materials Science and Engineering, Seoul National University) ;
  • Lee, Minsu (Surface R&D group, Korea Institute of Industrial Technology) ;
  • Yim, Tai Hong (Surface R&D group, Korea Institute of Industrial Technology) ;
  • Seo, Seok (EXPRESSLAB CO., LTD.) ;
  • Yi, Kyung-Woo (Department of Materials Science and Engineering, Seoul National University)
  • 투고 : 2018.10.19
  • 심사 : 2019.07.15
  • 발행 : 2019.12.31

초록

Electroplating is a widely used surface treatment method in the manufacturing process of electronic parts and uniformity of the electrodeposition thickness is very crucial for these applications. Since many variables including fluid flow influence the uniformity of the film, it is difficult to conduct efficient research only by experiments. So many studies using simulation have been carried out. However, the most popular simulation technique, which calculates secondary current distribution, has a limitation on the considering the effects of fluid flow on the deposition behavior. And modified method, which is calculating a tertiary current distribution, is limited to a two-dimensional study of simple shapes because of the massive computational load. In the present study, we propose a new electroplating simulation method that can be applied to complex shapes considering the effect of flow. This new model calculates the electroplating process with three steps. First, the thickness of boundary layers on the surface of the cathode plane and velocity magnitudes at the positions are calculated from the simulation of fluid flow. Next, polarization curves of different velocities are obtained by calculations or experiments. Finally, both results are incorporated into the electroplating simulation program as boundary conditions at the cathode plane. The results of the model showed good agreements with the experimental results, and the effects of fluid flow of electrolytes on the uniformity of deposition thickness was quantitatively predicted.

키워드

참고문헌

  1. C.T.J. Low, E.P.L. Roberts, F.C. Walsh, Electrochimica Acta, 2017, 52(11), 3831-3840. https://doi.org/10.1016/j.electacta.2006.10.056
  2. L.X. Ji, C. Wang, S.X. Wang, W. He, D.J. Xiao, Z. Tan, Circuit World, 2015, 41(1), 20-28. https://doi.org/10.1108/CW-09-2014-0037
  3. K.H. Lee, Journal of the Microelectronics and Packaging Society, 2012, 19(3), 1-7. https://doi.org/10.6117/kmeps.2012.19.3.001
  4. H. Garich, S. Shimpalee, V. Lilavivat, S. Snyder, E.J. Taylor, J. Electrochem. Soc., 2016, 163(8), E216-E222. https://doi.org/10.1149/2.0491608jes
  5. J.K. Luo, D.P. Chu, A.J. Flewitt, S.M. Spearing, N.A. Fleck, W.I. Milne, J. Electrochem. Soc., 2005, 152(1), C36-C41. https://doi.org/10.1149/1.1833320
  6. S. Kumar, S. Pande, P. Verma, International Journal of Current Engineering and Technology, 2015, 5(2), 700-703.
  7. S. Roy, Trans. Inst. Metal Finish., 2009, 87(3), 118-121. https://doi.org/10.1179/174591909X452194
  8. L.Z. Tong, Trans. Inst. Metal Finish., 2012, 90(3), 120-124. https://doi.org/10.1179/0020296712Z.00000000024
  9. F. Druesne, P. Paumelle, P. Villon, J. Mater. Process. Technol., 2001, 118(1-3), 368-370. https://doi.org/10.1016/S0924-0136(01)00984-0
  10. Y.J. Oh, S.H. Chung, M.S. Lee, Mater. Trans., 2004, 45(10), 3005-3010. https://doi.org/10.2320/matertrans.45.3005
  11. I. Belov, C. Zanella, C. Edstrom, P. Leisner, Mater. Des., 2016, 90, 693-703. https://doi.org/10.1016/j.matdes.2015.11.005
  12. M. Purcar, A. Dorochenko, L. Bortels, J. Deconinck, B. Van den Bossche, J. Mater. Process. Technol., 2008, 203(1-3), 58-71. https://doi.org/10.1016/j.jmatprotec.2007.09.082
  13. J. Newman, Thomas-Alyea, K.E., Electrochemical Systems, 3rd ed., John Wiley & Sons, Inc. 2004.
  14. P.K. Adanuvor, R.E. White, J. Electrochem. Soc., 1987, 134(5), 1093-1098. https://doi.org/10.1149/1.2100622
  15. Q.B. Dong, S. Santhanagopalan, R.E. White, J. Electrochem. Soc., 2007, 154(8), A816-A825. https://doi.org/10.1149/1.2741056
  16. Y.I. Kharkats, A.V. Sokirko, F.H. Bark, Electrochimica Acta, 1995, 40(2), 247-252. https://doi.org/10.1016/0013-4686(94)00223-N
  17. J. Vazquez-Arenas, Electrochimica Acta, 2010, 55(10), 3550-3559. https://doi.org/10.1016/j.electacta.2010.01.050
  18. CFD-ACE+, manual, ESI group, 2014.
  19. C. Madore, D. Landolt, Plat. Surf. Finish., 1993, 80(11), 73-78.
  20. S. Mehdizadeh, J.O. Dukovic, P.C. Andricacos, L.T. Romankiw, H.Y. Cheh, J. Electrochem. Soc., 1992, 139(1), 78-91. https://doi.org/10.1149/1.2069205
  21. S.M. Huang, C.W. Liu, W.P. Dow, J. Electrochem. Soc., 2012, 159(3), D135-D141. https://doi.org/10.1149/2.010203jes

피인용 문헌

  1. Mathematical modeling and simulation of electrochemical reactors: A critical review vol.239, 2019, https://doi.org/10.1016/j.ces.2021.116622