Coupled systems mechanics

  • 제8권6호
  • /
  • Pages.489-500
  • /
  • 2019
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Models for drinking water treatment processes

  • Jusic, Suvada (Department of Water Resources and Environmental Engineering, Faculty of Civil Engineering, The University of Sarajevo) ;
  • Milasinovic, Zoran (Department of Water Resources and Environmental Engineering, Faculty of Civil Engineering, The University of Sarajevo) ;
  • Milisic, Hata (Department of Water Resources and Environmental Engineering, Faculty of Civil Engineering, The University of Sarajevo) ;
  • Hadzic, Emina (Department of Water Resources and Environmental Engineering, Faculty of Civil Engineering, The University of Sarajevo)
  • 투고 : 2019.07.01
  • 심사 : 2019.10.29
  • 발행 : 2019.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

With drinking water standards becoming more rigorous and increasing demands for additional water quantities, while water resources are becoming more polluted, mathematical models became an important tool to improve water treatment processes performance in the water supply system. Water treatment processes models reflect the knowledge of the processes and they are useful tools for water treatment process optimization, design, operator training for decision making and fundamental research. Unfortunately, in the current practice of drinking-water production and distribution, water treatment processes modeling is not successfully applied. This article presents a review of some existing water treatment processes simulators and the experience of their application and indicating the main weak points of each process. Also, new approaches in the modeling of water treatment are presented and recommendations are given for the work in the future.

키워드

참고문헌

  1. Akinmolayan, F. (2017), "Mathematical modelling of clean water treatment works", Ph.D. Dissertation, University College London, U.K.
  2. Angreni, E. (2009), "Review on optimization of conventional drinking water treatment plant", World Appl. Sci. J., 7(9), 1144-1151.
  3. Ani V.A. (2016), "Process modelling and simulation of a simple water treatment plant", Int. J. Intell. Syst. Appl. Eng., 4(4), 84-94. https://doi.org/10.18201/ijisae.2016426378.
  4. Bakker, M., Rajewicz, T., Kien, H., Vreeburg, J.H.G. and Rietveld, L.C. (2014), "Advanced control of a water supply system: a case study", Water Practice Technol., 9(2), 264-276, https://doi.org/10.2166/wpt.2014.030.
  5. Campos, L.C., Smith, S.R. and Graham, N.J.D. (2006), "Deterministic-based model of slow sand filtration. I: Model development", J. Environ. Eng., 132(8), 872-894. https://doi.org/10.1061/(ASCE)0733-9372(2006)132:8(872).
  6. Dudley, J., Dillon, G. and Rietveld, L.C. (2008), "Water treatment simulators", J. Water Supply Res. Technol.-AQUA, 57(1), 13-21, https://doi.org/10.2166/aqua.2008.096.
  7. Ibrahimbegovic, A., Kassiotis, C. and Niekamp, R. (2016), "Fluid-structure interaction problems solution by operator split methods and efficient software development by code-coupling", Coupled Syst. Mech., 5(2), 145-156. http://doi.org/10.12989/csm.2016.5.2.145.
  8. Imamovic, I., Ibrahimbegovic, A., Knopf-Lenoir, C. and Mesic, E. (2015), "Plasticity-damage model parameters identification for structural connections", Coupled Syst. Mech., 4(4), 337-364, http://dx.doi.org/10.12989/csm.2015.4.4.337.
  9. Jakeman, A.J., Elsawah, S., Cuddy, S., Robson, B.J., McIntyre N. and Cook, F.J. (2017), "Good modelling practice - a discussion paper", Australian National University, Queensland, Australia.
  10. Juntunen, P., Liukkonen, M., Pelo, M., Lehtola, M.J., and Hiltunen, Y. (2012), "Modelling of water quality: An application to a water treatment process", Appl. Comput. Intell. Soft Comput., 4. https://doi.org/10.1155/2012/846321.
  11. Jusic, S. (2016), "State-of-the-art in the modeling of water treatment", J. Vodoprivreda, 48(282-284), 191-201.
  12. Jusic, S. and Milasinovic, Z. (2015) "Model based control of filter run time on potable water treatment plant", Coupled Syst. Mech., 4(2), 157-172. https://doi.org/10.12989/csm.2015.4.2.157.
  13. Kowalsky, U., Bente, S. and Dinkler, D. (2014), "Modeling of coupled THMC processes in porous media", Coupled Syst. Mech., 3(1), 27-52. https://doi.org/10.12989/csm.2014.3.1.027.
  14. Pinto, A., Fernandes, H., Vicente, J. and Neves, J. (2009), Water Resources Management, Vol. 125 V Chapter: "Optimizing Water Treatment Systems Using Artificial Intelligence Based Tools, WIT Press, Southampton, U.K., 185-194.
  15. Razavi, S., Tolson, B.A. and Burn, D.H. (2012), "Review of surrogate modeling in water resources", Water Resour. Res., 48(7), 32. https://doi.org/10.1029/2011WR011527.
  16. Rietveld, L.C. (2005), "Improving operation of drinking water treatment through modeling", Ph.D. Dissertation, TU Delft, The Netherlands.
  17. Rietveld, L.C. and de Vet, W.W. (2009), "Dynamic modeling of bentazon removal by pseudo-moving-bed granular activated carbon filtration applied to full-scale water treatment", J. Environ. Eng., 135(4), 243-249. https://doi.org/10.1061/(ASCE)0733-9372(2009)135:4(243).
  18. Rietveld, L.C., Van Schagen, K.M. and Van Dijk, J.C. (2004), "Information technology for linking research to education and training in drinking water treatment", Proceedings of the Water Institute of Southern Africa (WISA) Biennial Conference, Cape Town, South Africa, May.
  19. Serdarevic, A. and Dzubur, A. (2016), "Wastewater process modeling", Coupled Syst. Mech., 5(1), 21-39. http://doi.org/10.12989/csm.2016.5.1.021.
  20. Swan, R., Bridgeman, J. and Sterling, M. (2016), "An assessment of static and dynamic models to predict water treatment works performance", J. Water Supply Res. Technol.-AQUA, 65(7), 515-529. https://doi.org/10.2166/aqua.2016.005.
  21. Tasiopoulou, P., Taiebat, M., Nima Tafazzoli, N. and Boris Jeremic, B. (2015), "Solution verification procedures for modeling and simulation of fully coupled porous media: static and dynamic behavior", Coupled Syst. Mech., 4(1), 67-98. http://dx.doi.org/10.12989/csm.2015.4.1.067.
  22. Ulinici, S.C., Vlad, G., Vaju, D., Balint, I., Baisan, G. and Hetvary, M. (2014), "Numerical modeling of processes in water treatment plants as a basis for an optimal design", ECOTERRA J. Environ. Res. Protect., 11(3), 41-57.
  23. van den Hoven, T. and Kazner, C. (2009), TECHNEAU: Safe Drinking Water from Source to Tap State of the art & Perspectives, IWA Publishing. https://doi.org/10.2166/9781780401782.
  24. Van Schagen. K.M. (2009), "Model-based control of drinking-water treatment plants", Ph.D. Dissertation, University of Technology, TU Delft, The Netherlands.
  25. Yoann, M.M. (2013), "Development of an integrated tool for process modelling and life cycle assessment; Eco-design of process plants and application to drinking water treatment", Ph.D. Dissertation, Institute National des Sciences Appliques de Toulouse (INSA Toulouse), Toulouse, France.