Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform Graphene platelet with magnetorheological fluid core

  • Eyvazian, Arameh (Mechanical and Industrial Engineering Department, College of Engineering, Qatar University) ;
  • Hamouda, Abdel Magid (Mechanical and Industrial Engineering Department, College of Engineering, Qatar University) ;
  • Tarlochan, Faris (Mechanical and Industrial Engineering Department, College of Engineering, Qatar University) ;
  • Mohsenizadeh, Saeid (School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia) ;
  • Dastjerdi, Ali Ahmadi (Mechanical Engineering Department, Delft University of Technology)
  • Received : 2019.07.29
  • Accepted : 2019.10.21
  • Published : 2019.12.25
⟨ Previous Next ⟩

Abstract

This study considers the instability behavior of sandwich plates considering magnetorheological (MR) fluid core and piezoelectric reinforced facesheets. As facesheets at the top and bottom of structure have piezoelectric properties they are subjected to 3D electric field therefore they can be used as actuator and sensor, respectively and in order to control the vibration responses and loss factor of the structure a proportional-derivative (PD) controller is applied. Furthermore, Halpin-Tsai model is used to determine the material properties of facesheets which are reinforced by graphene platelets (GPLs). Moreover, because the core has magnetic property, it is exposed to magnetic field. In addition, Kelvin-Voigt theory is applied to calculate the structural damping of the piezoelectric layers. In order to consider environmental forces applied to structure, the visco-Pasternak model is assumed. In order to consider the mechanical behavior of structure, sinusoidal shear deformation theory (SSDT) is assumed and Hamilton's principle according to piezoelasticity theory is employed to calculate motion equations and these equations are solved based on differential cubature method (DCM) to obtain the vibration and modal loss factor of the structure subsequently. The effect of different factors such as GPLs distribution, dimensions of structure, electro-magnetic field, damping of structure, viscoelastic environment and boundary conditions of the structure on the vibration and loss factor of the system are considered. In order to indicate the accuracy of the obtained results, the results are validated with other published work. It is concluded from results that exposing magnetic field to the MR fluid core has positive effect on the behavior of the system.

Keywords

References

  1. Abad, F. and Rouzegar, J. (2017), "An exact spectral element method for free vibration analysis of FG plate integrated with piezoelectric layers", Compos. Struct., 180 696-708. https://doi.org/10.1016/j.compstruct.2017.08.030
  2. Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng Mech., Int. J., 54(1), 69-85. https://doi.org/10.12989/sem.2015.54.1.069
  3. Adiyaman, G., Birinci, A., Oner, E. and Yaylaci, M. (2016), "A receding contact problem between a functionally graded layer and two homogeneous quarter planes", Acta Mech., 227(6), 1753-1766. https://doi.org/10.1007/s00707-016-1580-y
  4. Aguib, S., Nour, A., Zahloul, H., Bossis, G., Chevalier, Y. and Lancon, P. (2014), "Dynamic behavior analysis of a magnetorheological elastomer sandwich plate", Int. J. Mech. Sci., 87 118-136. https://doi.org/10.1016/j.ijmecsci. 2014.05.014
  5. Birinci, A., Adiyaman, G., Yaylaci, M. and Oner, E. (2015), "Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM", Latin Am. J. Solids Struct., 12(9), 1771-1789. http://dx.doi.org/ 10.1590/1679-78251574
  6. Chen, C.-S., Liu, F.-H. and Chen, W.-R. (2017), "Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments", Steel Compos. Struct., Int. J., 23(3), 251-261. http://dx.doi.org/10.12989/scs.2017.23.3.251
  7. Eshaghi, M., Sedaghati, R. and Rakheja, S. (2016), "Analytical and experimental free vibration analysis of multi-layer MR-fluid circular plates under varying magnetic flux", Compos. Struct., 157, 78-86. https://doi.org/10.1016/j.compstruct. 2016.08.024
  8. Guth, D. and Maas, J. (2016), "Long-term stable magnetorheological fluid brake for application in wind turbines", J. Intellig. Mater. Syst. Struct., 27(15), 2125-2142. https://doi.org/10.1177/1045389X15624794
  9. Hajmohammad, M.H., Zarei, M.S., Nouri, A. and Kolahchi, R. (2017), "Dynamic buckling of sensor/functionally graded-carbon nanotube-reinforced laminated plates/actuator based on sinusoidal-visco-piezoelasticity theories", J. Sandw. Struct. Mat., 1-33. https://doi.org/10.1177/1099636217720373
  10. Hajmohammad, M.H., Farrokhian, A. and Kolahchi, R. (2018), "Smart control and vibration of viscoelastic actuator-multiphase nanocomposite conical shells-sensor considering hygrothermal load based on layerwise theory", Aerosp. Sci. Technol., 78, 260-270. https://doi.org/10.1016/j.ast.2018.04.030
  11. Han, Y., Wang, P., Fan, H., Sun, F., Chen, L. and Fang, D. (2015), "Free vibration of CFRC lattice-core sandwich cylinder with attached mass", Compos. Sci. Technol., 118, 226-235. https://doi.org/10.1016/j.compscitech.2015.09.007
  12. Jamali, M., Shojaee, T., Kolahchi, R. and Mohammadi, B. (2016), "Buckling analysis of nanocomposite cut out plate using domain decomposition method and orthogonal polynomials", Steel Compos. Struct., Int. J., 22(3), 691-712. https://doi.org/10.12989/ scs.2016.22.3.691
  13. Katariya, P.V. and Panda, S.K. (2019a), "Frequency and Deflection Responses of Shear Deformable Skew Sandwich Curved Shell Panel: A Finite Element Approach", Arab. J. Sci. Eng., 44(2), 1631-1648. https://doi.org/10.1007/s13369-018-3633-0
  14. Katariya, P.V. and Panda, S.K. (2019b), "Numerical evaluation of transient deflection and frequency responses of sandwich shell structure using higher order theory and different mechanical loadings", Eng. Comput., 35(3), 1009-1026. https://doi.org/10.1007/s00366-018-0646-y
  15. Katariya, P.V., Panda, S.K., Hirwani, C.K., Mehar, K. and Thakare, O. (2017a), "Enhancement of thermal buckling strength of laminated sandwich composite panel structure embedded with shape memory alloy fibre", Smart Struct. Syst., Int. J., 20(5), 595-605. https://doi.org/10.12989/sss.2017.20.5.595
  16. Katariya, P.V., Panda, S.K. and Mahapatra, T.R. (2017b), "Prediction of nonlinear eigenfrequency of laminated curved sandwich structure using higher-order equivalent single-layer theory", J. Sandw. Struct. Mater., 1099636217728420. https://doi.org/10.1177/1099636217728420
  17. Katariya, P.V., Panda, S.K. and Mahapatra, T.R. (2018), "Bending and vibration analysis of skew sandwich plate", Aircraf. Eng. Aerosp. Technol., 90(6), 885-895. https://doi.org/10.1108/ AEAT-05-2016-0087
  18. Kolahchi, R. (2017), "A comparative study on the bending, vibration and buckling of viscoelastic sandwich nano-plates based on different nonlocal theories using DC, HDQ and DQ methods", Aerosp. Sci. Tech., 66, 235-248. https://doi.org/10.1016/j.ast.2017.03.016
  19. Kolahchi, R. and Cheraghbak, A. (2017), "Agglomeration effects on the dynamic buckling of viscoelastic microplates reinforced with SWCNTs using Bolotin method", Nonlinear Dyn., 90(1), 479-492. https://doi.org/10.1007/s11071-017-3676-x
  20. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186. https://doi.org/10.1016/j.compstruct.2016.08.032
  21. Kolahchi, R., Keshtegar, B. and Fakhar, M.H. (2017a), "Optimization of dynamic buckling for sandwich nanocomposite plates with sensor and actuator layer based on sinusoidal-visco-piezoelasticity theories using Grey Wolf algorithm", J. Sandw. Struct. Mat., 1-25. https://doi.org/10.1177/1099636217731071
  22. Kolahchi, R., Zarei, M.S., Hajmohammad, M.H. and Nouri, A. (2017b), "Wave propagation of embedded viscoelastic FG-CNT-reinforced sandwich plates integrated with sensor and actuator based on refined zigzag theory", Int. J. Mech. Sci., 130, 534-545. https://doi.org/10.1177/1099636217720373
  23. Lall, A.K., Asnani, N.T. and Nakra, B.C. (1987), "Vibration and Damping Analysis of Rectangular Plate With Partially Covered Constrained Viscoelastic Layer", J. Vib. Acoust. Stress Reliab., 109(3), 241-247. https://doi.org/10.1115/1.3269427
  24. Lei, Y., Adhikari, S. and Friswell, M.I. (2013), "Vibration of nonlocal Kelvin-Voigt viscoelastic damped Timoshenko beams", Int. J. Eng. Sci., 66-67, 1-13. https://doi.org/10.1016/j.ijengsci.2013.02.004
  25. MalekzadehFard, K., Gholami, M., Reshadi, F. and Livani, M. (2015), "Free vibration and buckling analyses of cylindrical sandwich panel with magneto rheological fluid layer", J. Sandw. Struct. Mat., 19(4), 397-423. https://doi.org/10.1177/1099636215603034
  26. Mehar, K., Panda, S.K. and Patle, B.K. (2018), "Stress, deflection, and frequency analysis of CNT reinforced graded sandwich plate under uniform and linear thermal environment: A finite element approach", Polym. Compos., 39(10), 3792-3809. https://doi.org/10.1002/pc.24409
  27. Navazi, H.M., Bornassi, S. and Haddadpour, H. (2017), "Vibration analysis of a rotating magnetorheological tapered sandwich beam", Int. J. Mech. Sci., 122 308-317. https://doi.org /10.1016/j.ijmecsci.2017.01.016
  28. Nayak, B., Dwivedy, S.K. and Murthy, K.S.R.K. (2014), "Dynamic stability of a rotating sandwich beam with magnetorheological elastomer core", Eur. J. Mech. A. Solids, 47, 143-155. https://doi.org/10.1016/j.euromechsol.2014.03.004
  29. Nguyen, T.-K., Thai, T. and Vo, T. (2015), "A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates", Steel Compos. Struct., Int. J., 18(1), 91-120. http://dx.doi.org/10.12989/scs.2015.18.1.091
  30. Oner, E., Yaylaci, M. and Birinci, A. (2014), "Solution of a receding contact problem using an analytical method and a finite element method", J. Mech. Mater. Struct., 9(3), 333-345. https://doi.org/10.2140/jomms.2014.9.333
  31. Oveisi, A. and Nestorovic, T. (2016), "Transient Response of an Active Nonlinear Sandwich Piezolaminated Plate", Commun. Nonlin. Sci. Num. Sim., 45, 158-175. https://doi.org/10.1016/j.cnsns. 2016.09.012
  32. Sadeghpour, E., Sadighi, M. and Ohadi, A. (2016), "Free vibration analysis of a debonded curved sandwich beam", Eur. J. Mech. A. Solids, 57, 71-84. https://doi.org/10.1016/j.euromechsol.2015.11.006
  33. Sekkal, M., Fahsi, B., Tounsi, A. and Hassan, S. (2017), "A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate", Steel Compos. Struct., 25, 389-401. http://dx.doi.org/10.12989/scs.2017.25.4.389
  34. Sharma, A., Kumar, A., Susheel, C.K. and Kumar, R. (2016), "Smart damping of functionally graded nanotube reinforced composite rectangular plates", Compos. Struct., 155, 29-44. https://doi.org/10.1016/j.compstruct.2016.07.079
  35. Sharma, N., Mahapatra, T.R., Panda, S.K. and Mehar, K. (2018), "Evaluation of vibroacoustic responses of laminated composite sandwich structure using higher-order finite-boundary element model", Steel Compos. Struct., Int. J., 28(5), 629-639. https://doi.org/10.12989/scs.2018.28.5.629
  36. Singh, V.K., Mahapatra, T.R. and Panda, S.K. (2016), "Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator", Compos. Struct., 157, 121-130. https://doi.org/10.1016/j.compstruct.2016.08.020
  37. Vescovini, R., D'Ottavio, M., Dozio, L. and Polit, O. (2018), "Buckling and wrinkling of anisotropic sandwich plates", Int. J. Eng. Sci., 130, 136-156. https://doi.org/10.1016/j.ijengsci.2018.05.010
  38. Wang, B., Liu, Y. and Xiao, Z. (2001), "Dynamical modelling of the chain structure formation in electrorheological fluids", Int. J. Eng. Sci., 39(4), 453-475. https://doi.org/10.1016/S0020-7225(00)00054-9
  39. Xu, J., Wang, P., Pang, H., Wang, Y., Wu, J., Xuan, S. and Gong, X. (2018), "The dynamic mechanical properties of magnetorheological plastomers under high strain rate", Compos. Sci. Technol., 159, 50-58. https://doi.org/10.1016/j.compscitech.2018.02.030
  40. Yang, B., Yang, J. and Kitipornchai, S. (2017), "Thermoelastic analysis of functionally graded graphene reinforced rectangular plates based on 3D elasticity", Meccanica, 52(10), 2275-2292. https://doi.org/10.1007/s11012-016-0579-8
  41. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., Int. J., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241
  42. Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., Int. J., 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.607
  43. Yeh, J.-Y. (2011), "Free vibration analysis of rotating polar orthotropic annular plate with ER damping treatment", Composites Part B, 42(4), 781-788. https://doi.org/10.1016/j.compositesb.2011.01.023
  44. Yeh, J.-Y. (2013), "Vibration analysis of sandwich rectangular plates with magnetorheological elastomer damping treatment", Smart. Mater. Struct., 22(3), 035010. https://doi.org/10.1088/0964-1726/22/3/035010
  45. Yeh, J.-Y., Chen, J.-Y., Lin, C.-T. and Liu, C.-Y. (2009), "Damping and vibration analysis of polar orthotropic annular plates with ER treatment", J. Sound Vib., 325(1), 1-13. https://doi.org/10.1016/j.jsv.2009.02.047
  46. Ying, Z., Chen, H. and Ni, Y. (2011), "Magnetorheological visco-elastomer and its application to suppressing microvibration of sandwich plates", Proceedings of SPIE - The International Society for Optical Engineering, 8409, 42. https://doi.org/10.1117/12.919835
  47. Zarei, M.S., Azizkhani, M.B., Hajmohammad, M.H. and Kolahchi, R. (2017), "Dynamic buckling of polymer-carbon nanotube-fiber multiphase nanocomposite viscoelastic laminated conical shells in hygrothermal environments", J. Sandw. Struct. Mat., 1-26. https://doi.org/10.1177 https://doi.org/10.1177/109963620462001

Cited by

  1. Vibration analysis of sandwich sector plate with porous core and functionally graded wavy carbon nanotube-reinforced layers vol.37, pp.6, 2019, https://doi.org/10.12989/scs.2020.37.6.711
  2. The influence of graphene platelet with different dispersions on the vibrational behavior of nanocomposite truncated conical shells vol.38, pp.1, 2021, https://doi.org/10.12989/scs.2021.38.1.047
  3. Bending analysis of functionally graded plates using a new refined quasi-3D shear deformation theory and the concept of the neutral surface position vol.39, pp.1, 2021, https://doi.org/10.12989/scs.2021.39.1.051
  4. Investigation on the dynamic response of porous FGM beams resting on variable foundation using a new higher order shear deformation theory vol.39, pp.1, 2019, https://doi.org/10.12989/scs.2021.39.1.095
  5. On the free vibration response of laminated composite plates via FEM vol.39, pp.2, 2019, https://doi.org/10.12989/scs.2021.39.2.149
  6. Computer modeling for frequency performance of viscoelastic magneto-electro-elastic annular micro/nanosystem via adaptive tuned deep learning neural network optimization vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.203
  7. Bending analysis of the multi-phase nanocomposite reinforced circular plate via 3D-elasticity theory vol.40, pp.4, 2021, https://doi.org/10.12989/scs.2021.40.4.601