DOI QR코드

DOI QR Code

Exploratory study on wind-adaptable design for super-tall buildings

  • Xie, Jiming (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Yang, Xiao-yue (College of Civil Engineering and Architecture, Zhejiang University)
  • 투고 : 2018.12.28
  • 심사 : 2019.05.30
  • 발행 : 2019.12.25

초록

Wind-adaptable design (WAD) provides a new method for super-tall buildings to lessen design conflicts between architectural prerequisites and aerodynamic requirements, and to increase the efficiency of structural system. Compared to conventional wind-resistant design approach, the proposed new method is to design a building in two consecutive stages: a stage in normal winds and a stage during extreme winds. In majority of time, the required structural capacity is primarily for normal wind effects. During extreme wind storms, the building's capacity to wind loads is reinforced by on-demand operable flow control measures/devices to effectively reduce the loads. A general procedure for using WAD is provided, followed by an exploratory case study to demonstrate the application of WAD.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC)

The financial support for this research by the National Natural Science Foundation of China (NSFC), Grant No.51578505 is greatly acknowledged.

참고문헌

  1. Aly, A.M., Chokwitthaya, C. and Poche, R. (2017), "Retrofitting building roofs with aerodynamic features and solar panels to reduce hurricane damage and enhance eco-friendly energy production", Sust. Cities Society, 35, 581-593. https://doi.org/10.1016/j.scs.2017.09.002.
  2. ASCE/SEI 7-10 (2010), Minimum design loads for buildings and other structures, ASCE, Reston, Va.
  3. Dutton, R. and Isyumov, N. (1990), "Reduction of tall building motion by aerodynamic treatments", J. Wind Eng. Ind. Aerod., 36, https://doi.org/10.1016/0167-6105(90)90071-J.
  4. Elshaer, A., Bitsuamlak, G. and Damatty, A.E. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimization", Eng. Struct., 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019.
  5. Hayashida, H. and Iwasa, Y. (1990), "Aerodynamic shape effects of tall building for vortex induced vibration", J. Wind Eng. Ind. Aerod., 33(1-2), 237-242. https://doi.org/10.1016/0167-6105(90)90039-F.
  6. Irwin, P.A. (2007), "Wind engineering challenges of the new generation of super-tall buildings", Proceedings of the 12th Int. Conf. on Wind Eng., Cairns, Australia 2007.
  7. Isyumov, N., Dutton, R. and Davenport, A.G. (1989), "Aerodynamic methods for mitigating wind-induced building motions", Proc. ASCE Structures Congress.
  8. Kareem, A. (1982), "Across Wind Response of Buildings", J. Struct. Div. - ASCE, 108(4), 869-887. https://doi.org/10.1061/JSDEAG.0005930
  9. Kareem, A. Kijewski, T. and Tamura, Y. (1999), "Mitigation of motion of tall buildings with recent applications", Wind Struct., 2(3), 201-251. http://dx.doi.org/10.12989/was.1999.2.3.201.
  10. Kim, Y.C. and Kanda, J. (2013), "Wind pressures on tapered and set-back tall buildings", J. Fluids Struct., 39, 306-321. https://doi.org/10.1016/j.jfluidstructs.2013.02.008.
  11. Kim, Y.C. Tamura, Y., Tanaka, H., Ohtake, K., Bandi, E.K. and Yoshida, A. (2014), "Wind-induced responses of super-tall buildings with various atypical building shapes", J. Wind Eng. Ind. Aerod., 133, 191-199. https://doi.org/10.1016/j.jweia.2014.06.004.
  12. Kwok, K.C.S. (1988), "Effect of building shape on wind-induced response of tall buildings", J. Wind Eng. Ind. Aerod., 28(1-3), 381-390. https://doi.org/10.1016/0167-6105(88)90134-1.
  13. Kwok, K.C.S. and Isyumov, N. (1998), "Aerodynamic measures to reduce the wind-induced response of buildings and structures", Proc. Str. Eng. World Congress ASCE.
  14. Sharma, A. Mittal, H. and Gairola, A. (2018), "Mitigation of wind load on tall buildings through aerodynamic modifications: Review", J. Buildi. Eng., 18, 180-194. https://doi.org/10.1016/j.jobe.2018.03.005.
  15. Stensrud, D.J. Wicker, L.J, Xue, M., et al. (2013), "Progress and challenges with Warn-on-Forecast" , J. Atmos. Res., 123, 2-16. https://doi.org/10.1016/j.atmosres.2012.04.004.
  16. Tanaka, H., Tamura, Y., Ohtake, K., Nakai, M. and Kim, Y.C. (2012), "Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurations", J. Wind Eng. Ind. Aerod., 107-108, 179-191. https://doi.org/10.1016/j.jweia.2012.04.014.
  17. Tanaka, H., Tamura, Y., Ohtake, K., Nakai, M., Chul, K.Y. and Kumar, B.E. (2013), "Aerodynamic and flow characteristics of tall buildings with various unconventional configurations", Int. J. High-Rise Build., 2(3), 213-228.
  18. Tse, K.T., Hitchcock, P.A., Kwok, K.C.S., Thepmongkorn, S. and Chan, C.M. (2009). "Economic perspectives of aerodynamic treatments of square tall buildings", J. Wind Eng. Ind. Aerod., 97(9-10), 455-467. https://doi.org/10.1016/j.jweia.2009.07.005.
  19. Xie, J. (2014), "Aerodynamic optimization of super-tall buildings and its effectiveness assessment", J. Wind Eng. Ind. Aerod., 130, 88-98. https://doi.org/10.1016/j.jweia.2014.04.004.
  20. Xu, Z. and Xie, J. (2018), "Application of wind fairings for building aerodynamic optimization", Wind Engineering for Natural Hazards. ASCE special publication, 193-204

피인용 문헌

  1. Field measurement-based wind-induced response analysis of multi-tower building with tuned mass damper vol.32, pp.2, 2019, https://doi.org/10.12989/was.2021.32.2.143