DOI QR코드

DOI QR Code

PMSG 풍력발전기용 3L ANPC와 TNPC 컨버터에서의 10kV IGCT 성능 비교 평가

Comparative Performance Evaluation of 10kV IGCTs in 3L ANPC and TNPC Converters in PMSG MV Wind Turbines

  • 투고 : 2019.04.25
  • 심사 : 2019.07.09
  • 발행 : 2019.12.20

초록

Several multilevel converter topologies have been proposed and compared. The three-level (3L) neutral-point-clamped (NPC) topology is promising and widely accepted. However, this topology suffers from uneven loss distribution among switches due to its fixed switching strategy. The 3L active NPC (ANPC) topology, which exhibits improved loss distribution profile, was proposed to address this disadvantage. The 3L T-NPC topology, a hybrid configuration of 2L and 3L NPC topologies, was introduced to address not only the loss distribution problem but also the reduction in the number of switches. In the present research, the application of these three topologies in PMSG-based medium-voltage wind turbines was investigated. The power devices considered were 10 kV IGCTs. Performance was evaluated in terms of a power loss of 10 kV IGCT for each NPC topology, which is a crucial indicator of thermal behavior, reliability, cost, and lifetime of any converter. The comparison was performed using ABB make 10 kV IGCT 5SHY17L9000 and the simulation tool PLECS.

키워드

참고문헌

  1. I. T. Nabae and H. Akagi, "A new neutralpoint-clamped PWM inverter," IEEE Trans. Industrial Applications, Vol. IA-17, No. 5, pp. 518-523, May 1981. https://doi.org/10.1109/TIA.1981.4503992
  2. P. S. Barbosa, P. Steinke, J. Meysenc, M. L. Winkelnkemper, and N. Celanovic, "Active neutralpoint-clamped multilevel converters," in 2005 IEEE Power Electronics Specialists Conference, pp. 2296-2301, Jun. 2005.
  3. M. Schweizer and J. W. Kolar, "High efficiency drive system with 3-level T-type inverter," in 2011 IEEE International Power Electronics and Motion Control Conference (ECCE Europe 2011), pp. 1-10, Aug. .
  4. M. Schweizer and J. W. Kolar, "Design and implementation of a highly efficient three level t-type converter for low-voltage applications," IEEE Trans. on Power Electronics, Vol. 28, No. 2, pp. 899-907, Feb. 2013. https://doi.org/10.1109/TPEL.2012.2203151
  5. I. Nistor, T. Wikstrom, and M. Scheinert, "IGCTs: High-power technology for power electronics applications," in 2009 International Semiconductors Conference, Vol. 1, pp. 65-73, Oct. 2009.
  6. Y. Suh, J. K. Steinke, and P. K. Steimer, "Efficiency comparison of voltage-source and current-source drive systems for medium-voltage applications," IEEE Trans. Industrial Electronics, Vol. 54, No. 5, pp. 2521-2531, Oct. 2007. https://doi.org/10.1109/TIE.2007.900352
  7. Y. Jiao and F. C. Lee, "New modulation scheme for three-level active neutral-point-clamped converter with loss and stress reduction," IEEE Trans. Industrial Electronics, Vol. 62, No. 9, pp. 5468-5479, Sep. 2015. https://doi.org/10.1109/TIE.2015.2405505
  8. D. Floricau, E. Floricau, and M. Dumitrescu, "Natural doubling of the apparent switching frequency using three-level ANPC converter," in 2008 International School on Non-sinusoidal Currents and Compensation, pp. 1-6, Jun. 2008.
  9. S. Bernet, E. Carroll, P. Streit, O. Apeldoorn, P. Steimer, and S. Tschirley, "Design, test and characteristics of 10kV IGCTs," in 2003 IAS Annual Meeting on Conference Record of the Industrial Applications Conference, Vol. 2, pp. 1012-1019, Oct. 2003.
  10. C. Thomas and B. Bjorn, "High power IGCT switches-state-of-the-art and future," in 2011 Power Electronics Europe, PCIM:12-408/506, No. 3, pp. 30-34, 2011.
  11. K. Lee, K. Jung, Y. Suh, C. Kim, H. Yoo, and S. Park "Comparison of high-power semiconductor devices losses in 5MW PMSG MV wind turbines," in 2014 Applied Power Electronics Conference and Exposition (APEC), pp. 1048-2334, Mar. 2014.
  12. S. Shirmohammadi, K. Lee, and Y. Suh, “Low dissipative snubber using flyback type transformer for 10kV IGCT in 7 MW wind turbine systems,” IEEE Trans. on Power Electronics, Vol. 33, No. 7, pp. 5898-5908, Jul. 2018. https://doi.org/10.1109/TPEL.2017.2743764