Structural Engineering and Mechanics

  • 제72권5호
  • /
  • Pages.631-642
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural tests on two-span unbonded post-tensioned lightweight concrete beams

  • Yang, Keun-Hyeok (Department of Architectural Engineering, Kyonggi University) ;
  • Lee, Kyung-Ho (Department of Architectural Engineering, Kyonggi University Graduate School) ;
  • Yoon, Hyun-Sub (Department of Architectural Engineering, Kyonggi University Graduate School)
  • 투고 : 2018.07.21
  • 심사 : 2019.07.30
  • 발행 : 2019.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of the present study is to examine the flexural behavior of two-span post-tensioned lightweight aggregate concrete (LWAC) beams using unbonded tendons and the reliability of the design provisions of ACI 318-14 for such beams. The parameters investigated were the effective prestress and loading type, including the symmetrical top one-point, two third-point, and analogous uniform loading systems. The unbonded prestressing three-wire strands were arranged with a harped profile of variable eccentricity. The total length of the beam, measured between both strand anchorages, was 11000 mm. The test results were compared with those compiled from simply supported LWAC one-way members, wherever possible. The ultimate load capacity of the present beam specimens was evaluated by the collapse mechanism of the plasticity theorem and the nominal section moment strength calculated following the provision of the ACI 318-14. The test results showed that the two-span post-tensioned LWAC beams had lower stress increase (Δfps) in the unbonded tendons than the simply supported LWAC beams with a similar reinforcement index. The effect of the loading type on Δfps and displacement ductility was less significant for two-span beams than for the comparable simply supported beams. The design equations for Δfps and Δfps proposed by ACI 318-14 and Harajli are conservative for the present two-span post-tensioned LWAC beams, although the safety decreases for the two-span beam, compared to the ratios between experiments and predictions obtained from simply supported beams.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea Government (MSIP) (No. NRF-2017R1A2B3008463) and Basic Science Research Program through NRF funded by the Ministry of Science, ICT & Future Planning (No. 2015R1A5A1037548).

참고문헌

  1. Au, F.T.K. and Du, J.S. (2004), "Prediction of ultimate stress in unbonded prestressed tendons", Mag. Concrete. Res., 56(1), 1-11. https://doi.org/10.1680/macr.2004.56.1.1
  2. Baker, A.L.L. (1949), "A plastic theory of design for ordinary reinforced and prestressed concrete including moment redistribution in continuous members", Mag. Concrete. Res., 1(2), 57-66. https://doi.org/10.1680/macr.1949.1.2.57
  3. Baker, O. (2008), "Fly ash lightweight aggregates in high performance concrete", Constr. Build. Mater., 22(12), 2393-2399. https://doi.org/10.1016/j.conbuildmat.2007.09.001.
  4. Barbieri, R.A., Gastal, F.P.S.L. and Filho, A.C. (2006), "Numerical model for the analysis of unbonded prestressed members", ASCE. J. Struct. Eng., 132(1), 34-42. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(34).
  5. Behnam, V. and Shami, N. (2016), "Self-compacting light-weight concrete; mix design and proportions", Struct. Eng. Mech., 58(1), 143-161. https://doi.org/10.12989/sem.2016.58.1.143.
  6. Burns, N.H., Helwig, T. and Tsujimoto, T. (1991), "Effective prestress force in continuous post-tensioned beams with unbonded tendons", ACI. Struct. J., 88(1), 84-90.
  7. Collins, M.P. and Mitchell, D. (1991), Prestressed concrete structures, Prentice-Hall, Upper Saddle River, NJ, USA.
  8. Harajli, M.H. (2006), "On the stress in unbonded tendons at ultimate: critical assessment and proposed changes", ACI. Struct. J., 103(6), 1-10.
  9. Harajli, M.H. (2012), "Tendon stress at ultimate in continuous unbonded post-tensioned members: proposed modification of ACI 318, Eq. (18-4) and (18-5)", ACI. Struct. J., 109(2), 183-192.
  10. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2014), "Factors affecting moment redistribution at ultimate in continuous beams prestressed with external CFRP tendons", Compos. Part B: Eng., 66, 136-146. https://doi.org/10.1016/j.compositesb.2014.05.007.
  11. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2016), "Response of continuous concrete beams internally prestressed with unbonded FRP and steel tendons", Compos. Struct., 154, 92-105. https://doi.org/10.1016/j.compstruct.2016.07.028.
  12. Macgregor, J.G. and Wight, J.K. (2006), Reinforced concrete: mechanics and design, Pearson Education Limited, London, United Kingdom.
  13. Mattock, A.H., Yamazaki, J., and Kattula, B.T. (1971), "Comparative study of prestressed concrete beams with and without bond", ACI. J. Proc., 68(2), 116-125.
  14. Moon, J.H. and Burns, N.H. (1997), "Flexural behavior of member with unbonded tendons. I: theory", ASCE. J. Struct. Eng., 123(8), 1087-1094. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:8(1087).
  15. Mun, J.H. and Yang, K.H. (2018), "Flexural behavior of externally post-tensioned two-span lightweight concrete beams", Magaz. Concrete. Res., https://doi.org/10.1680/jmacr.17.00533.
  16. Naaman, A.E. and Alkhairi, F.M. (1991), "Stress at ultimate in unbonded post-tensioning tendons: part 2-proposed methodology", ACI. Struct. J., 88(6), 683-692.
  17. Naaman, A.E., Burns, N., French, C., Gamble, W.L. and Mattock, A.H. (2002), "Stresses in unbonded prestressing tendons at ultimate: recommendation", ACI. Struct. J., 99(4), 518-529.
  18. Park, R. and Paulay, T. (1975), Reinforced concrete structures, John Wiley and Sons, New York, NY, USA.
  19. Saeed, G., Ali, A.M., Habib, A.B. and Hamid, R.R. (2015), "Flexural strengthening of continuous unbonded post-tensioned concrete beams with end-anchored CFRP laminates", Struct. Eng. Mech., 53(6), 1083-1104. http://doi.org/10.12989/sem.2015.53.6.1083.
  20. Yang, K.H. and Kang, T.H.K. (2011), "Equivalent-strain distribution factor for unbonded tendon stress at ultimate", ACI. Struct. J., 105(2), 217-226.
  21. Yang, K.H. and Mun, J.H. (2013a), "Flexural capacity and stress in unbonded tendons of post-tensioned lightweight concrete beams", Adv. Struct. Eng., 16(7), 1297-1310. https://doi.org/10.1260/1369-4332.16.7.1297.
  22. Yang, K.H., Mun, J.H. and Kim, G.H. (2013b), "Flexural behavior of post-tensioned normal-strength lightweight concrete one-way slabs", Eng. Struct., 56, 1295-1307. https://doi.org/10.1016/j.engstruct.2013.07.004.
  23. Yang, K.H., Mun, J.H. and Lee, J.S. (2014), "Flexural tests on pre-tensioned lightweight concrete beams", P. I. CIVIL. ENG-STR. B., 167(4), 203-216. https://doi.org/10.1680/stbu.12.00003.