References
- Nam, H. S., Lee, J. M., Youn, G. G., Kim, Y. J. and Kim, J. W., 2018, "Simulation of ductile fracture toughness test under monotonic and reverse cyclic loading," Int. J. Mech. Sci., Vol. 135, pp. 609-620. doi: https://doi.org/10.1016/j.ijmecsci. 2017.11.037
- Nam, H. S., Lee, J. M., Kim, Y. J. and Kim, J. W., 2018, "Numerical ductile fracture prediction of circumferential through-wall cracked pipes under very low cycle fatigue loading conditions," Eng. Fract. Mech., Vol. 194, pp. 175-189. doi: https://doi.org/10.1016/j.engfracmech.2018.02.025
- Nam, H. S., Youn, G. G., Lee, J. M., Kim, H. T. and Kim, Y. J., 2019, "Numerical simulation and experimental validation of ductile tearing in A106 Gr. B piping system under simulated seismic loading conditions," P. I. Mehc. Eng. L-J Mat., Vol. 233, No. 1, pp. 28-38. doi:https://doi.org/10.1177/1464420718778706
- Youn, G. G., Nam, H. S., Kim, Y. J. and Kim, J. W., 2019, "Numerical prediction of thermal aging and cyclic loading effects on fracture toughness of cast stainless steel CF8A: Experiment and numerical study," Int. J. Mech. Sci., Vol. 163, pp. 105120. doi:https://doi.org/10.1016/j.ijmecsci.2019.105120
- Kweon, H. D., Heo, E. J., Lee, J. M. and Kim, J. W., 2018, "Strain-based damage evaluation of specimens under large seismic loads," Trans. of the KPVP, Vol. 14, No.2, pp. 24-31. doi:https://doi.org/10.20466/KPVP.2018.14.2.024
- Seok, C. S. and Murty, K. L., 2000, "A study on the decrease of fracture resistance curve under reversed cyclic loading," Int. J. Press. Ves. Pip., Vol. 77, No. 6, pp. 303-311. doi:https://doi.org/10.1016/S0308-0161(00)00018-1
- Roy, H., Sivaprasad, S., Tarafder, S. and Ray, K. K., 2009, "Monotonic vis-a-vis cyclic fracture behaviour of AISI 304LN stainless steel," Eng. Fract. Mech., Vol. 76, No. 12, pp. 1252-1263. doi:https://doi.org/10.1016/S0308-0161(00)00018-1
- Nam, H. S., Kim, J. S., Ryu, H. W., Kim, Y. J. and Kim, J. W., 2016, "Numerical ductile tearing simulation of circumferential cracked pipe tests under dynamic loading conditions," Nucl. Eng. Technol., Vol. 48, No. 5, pp. 1252-1263. doi:https://doi.org/10.1016/j.net.2016.03.012
- Prager, W., 1956, "A new method of analyzing stresses and strains in work hardening plastic solids," J. Appl. Mech-T ASME., Vol. 23, pp. 493-496. https://doi.org/10.1115/1.4011389
- Armstrong, P. J. and Frederick, C. O., 1966, "A mathematical representation of the multiaxial Bauschinger effect," CEGB Report, Vol. 731, No. RD/B/NU.
- Ohno, N. and Wang, J. D., 1993, "Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior," Int. J. Plasticity., Vol. 9, pp. 375-390. doi:https://doi.org/10.1016/0749-6419(93)90043-P
- Chaboche, J. L., Dang-Van, K. and Cordier, G., 1979, "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel," the 5th International conferenceon SMiRT: Div. L, Germany, FR, August 9-21, INKA-CONF-79-321-526.
- Chaboche, J. L., 1986, "Time-independent constitutive theories for cyclic plasticity," Int. J. Plasticity., Vol. 2, pp. 149-188. doi:https://doi.org/10.1016/0749-6419(86)90010-0
- Chaboche, J. L., 1991, "On some modifications of kinematic hardening to improve the description of ratcheting effects," Int. J. Plasticity., Vol. 7, pp. 661-667. doi:https://doi.org/10.1016/0749-6419(91)90050-9
- Chaboche, J. L., 1994, "Modeling of ratcheting: evaluation of various approaches," Eur. J. Mech A-Solid., Vol. 13, pp. 501-518.
- Bari, S. and Hassan, T., 2000, "Anatomy of coupled constitutive models for ratcheting simulation," Int. J. plasticity., Vol. 16, pp. 381-409. doi:https://doi.org/10.1016/S0749-6419(99)00059-5
- Bari, S., Hassan, T., 2002, "An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation," Int. J. plasticity., Vol. 18, pp. 873-894. doi:https://doi.org/10.1016/S0749-6419(01)00012-2
- Jeon, D. S., Kang, J. Y., Huh, N. S., Kim, J. S. and Kim, Y. J., 2017, "Effect of hardening models on cyclic deformation behavior of tensile specimen and nuclear piping system," Trans. of the KPVP, Vol. 13, No.2, pp. 67-74. doi:https://doi.org/10.20466/KPVP.2017.13.2.067
-
Kim, J. W. and Choi, M. R., 2015, "Effect of loading rate on the deformation behavior of SA508 Gr. 1a low-alloy steel and TP316 stainless steel pipe materials at RT and
$316^{\circ}C$ ,"Trans. of the KSME A., Vol. 39, pp. 383-390. doi:https://doi.org/10.3795/KSME-A.2015.39.4.383 - ASTM E1820, 2009, "Standard test method for tension testing of metallic materials," In: annual book of ASTM standard, American society for testing and materials, Philadelphia, USA.
- Kim, J. W. and Choi, M. R., 2016, "Effect of loading rate on the fracture behavior of nuclear piping materials under cyclic loading conditions," Nucl. Eng. Technol., Vol. 48, No. 6, pp. 1376-1386. doi:https://doi.org/10.1016/j.net.2016.06.006
- ABAQUS. version 2018, 2018, User's manual, Inc. and Dassault systems.
- Bannantine, J. A., Comper, J. J. and Hankrock, J. L., 1990, "Fundamentals of metal fatigue analysis," Prentice hall.
- Ryu, H. W., 2019, Determination of simplified hardening parameters to simulate deformation behavior of cracked components under cyclic loading condition, Korea university of mechanical engineering, Ph.D Thesis.
- USNRC, 2014, "Effect of LWR coolant environments on fatigue life of reactor materials," U.S. Nuclear Regulatory Commission, Washington, DC, NUREG/CR-6909.
- USNRC, 1999, "Effect of LWR coolant environments on fatigue design curves of austenitic stainless steels," U.S. Nuclear Regulatory Commission, Washington, DC, NUREG/CR-5704.