참고문헌
- Shah, V.N. and Macdonald, P.E., 1993, Aging and Life Extension of Major Light Water Reactor Components, Elsevier Science Pub., Amsterdam
- IAEA, 1999, "Assessment and management of ageing of major nuclear power plant components important to safety: PWR vessel internals," IAEA TECDOC-1119.
- Murty, K.L. and Charit, I., 2012, Introduction to Nuclear Materials - Fundamentals and Applications, Wiley-VCH.
- O.K. Chopra and A.S. Rao, 2011, "A review of irradiation effects on LWR core internal materials - Neutron embrittlement," J. Nucl. Mater., Vol.412, pp.195-208. https://doi.org/10.1016/j.jnucmat.2011.02.059
- Kim, J.S., 2015, "Structural Integrity Analysis of Lower Core Plate in Pressurized Water Reactors Considering Stress Triaxiality," Procedia Eng., Vol.130, pp.1494-1502. https://doi.org/10.1016/j.proeng.2015.12.318
- EPRI, 2007, "Materials Reliability Program: PWR Internals Age-Related Material Properties, Degradation Mechanisms, Models, and Basis Data-State of Knowledge (MRP-211)," Electric Power Research Institute, Palo Alto, CA, 1015013.
- Jitsukawa, S., Shiba, K., Hishinuma, A., and Alexander, D.J., 1996, "Comparison of elastic-plastic fracture toughness of irradiated and cold-worked JPCA using miniaturized DCT specimens," J. of Nucl. Mater., Vol.233-237, pp.152-155. https://doi.org/10.1016/S0022-3115(96)00204-8
- Kamaya, M., 2015, "Elastic-plastic failure assessment of cold worked stainless steel pipes," Int. J. Pres. Ves. Piping, Vol.131, pp.45-51. https://doi.org/10.1016/j.ijpvp.2015.04.008
- Choi, K.J., Yoo, S.C., Kim, T., and Kim, J.H., 2015, "Investigation of Warm Rolling and Dissolved Hydrogen on Crack Growth Rate of 316L Austenitic Stainless Steel in Promary Water Condition," Proc. of KPVP, Gim Cheon, Korea, Nov. 19-20, pp.21-22.
- Choi, M.R. and Kim, J.W., 2018, "Effect of Aging Degradation on the Cyclic Deformation Behavior of Nuclear Structural Materials," Trans. of KSME (A), Vol.42, pp.239-246. https://doi.org/10.3795/KSME-A.2018.42.3.2
- Kim, J.W., Choi, M.R., and Kim, Y.J., 2018, "J-R fracture toughness of cold-worked TP316L stainless steel under seismic loading conditions," Int. J. Press. Ves. & Piping, Vol.171, pp.137-144. https://doi.org/10.1016/j.ijpvp.2019.02.012
- Kenik, E.A. and Busby, J.T., 2012, "Radiationinduced degradation of stainless steel light water reactor internals," Mater. Sci. & Eng. (R), Vol.73, pp.67-83. https://doi.org/10.1016/j.mser.2012.05.002
- Pawel, J.E., Rowcliffe, A.F., Lucas, G.E., and Zinkle, S.J., 1996, "Irradiation performance of stainless steels for ITER application," J. of Nucl. Mater.. Vol.239, pp.126-131. https://doi.org/10.1016/S0022-3115(96)00484-9
-
Matijasevic, M., Lucon, E., and Almazouzi, A., 2008, "Behavior of ferritic.martensitic steels after n-irradiation at 200 and
$300^{\circ}C$ ," J. of Nucl. Mater.. Vol.377, pp.101-108. https://doi.org/10.1016/j.jnucmat.2008.02.063 - Devries, M.I., Tjoa, G.L., and Elen, J.D., 1979, "Effects of neutron irradiation on low-cycle fatigue and tensile properties of AISI Type 304 stainless steel at 298K," Fati. of Eng. Mater. & Struct., Vol.1, pp.159-171. https://doi.org/10.1111/j.1460-2695.1979.tb00375.x
- ASTM E8/E8M-09, 2009, "Standard test method for tension testing of metallic materials," ASTM International, West Conshohocken, PA.
- ASTM E1820-15, 2015, "Standard test method for measurement of fracture toughness," ASTM International, West Conshohocken, PA.
- ASTM E606-92, 1998, Standard Practice for Strain-Controlled Fatigue Testing (Reapproved 1998), ASTM International, West Conshohocken, PA.
- Paul, S.K., Sivaprasad, S., Dhar, S., and Tarafder, S., 2011, "Key issues in cyclic plastic deformation: Experimentation," Mech. of Mater., Vol.41, pp.705-720. https://doi.org/10.1016/j.mechmat.2011.07.011
- Kim, C., 2018, "Nondestructive Evaluation of Strain-Induced Phase Transformation and Damage Accumulation in Austenitic Stainless Steel Subjected to Cyclic Loading," Metals, Vol.8, pp.1-14. https://doi.org/10.3390/met8010014
- Facheris, G., 2014, Cyclic plastic material behavior leading to crack initiation in stainless steel under complex fatigue loading conditions, Mechanical Engineering, Politecnico di Milano, Ph.D thesis.