참고문헌
- Bindl A, Mormann WH. Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil, 32(6), 441-447, 2005. https://doi.org/10.1111/j.1365-2842.2005.01446.x
- Christensen GJ. Impressions are changing: deciding on conventional, digital or digital plus in-office milling. J Am Dent Assoc, 140(10), 1301-1304, 2009. https://doi.org/10.14219/jada.archive.2009.0054
- Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: A systematic review. J Prosthet Dent, 98(6), 389-404, 2007. https://doi.org/10.1016/S0022-3913(07)60124-3
- Fasbinder DJ, Dennison JB, Heys D, Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns. A two-year report. J Am Dent Assoc, 141(suppl 2), 10S-14S, 2010. https://doi.org/10.14219/jada.archive.2010.0355
- Giordano R. Materials for chairside CAD/CAMproduced restorations. J Am Dent Assoc, 137(9 suppl), 14S-21S, 2006. https://doi.org/10.14219/jada.archive.2006.0397
- Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent, 62(4), 405-408, 1989. https://doi.org/10.1016/0022-3913(89)90170-4
- Kelly RJ. Dental ceramics: what is this stuff anyway? J Am Dent Assoc, 139(suppl 4), 4S-7S, 2008. https://doi.org/10.14219/jada.archive.2008.0359
- Kunii J, Hotta Y, Tamaki Y, Ozawa A, Kobayashi Y, Fujishima A, Miyazaki T, Fujiwara T. Effect of sintering on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks. Dent Mater J, 26(7), 820-826, 2007. https://doi.org/10.4012/dmj.26.820
- McLean JM, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J, 131(3), 107-111, 1971. https://doi.org/10.1038/sj.bdj.4802708
- Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J, 28(1), 44-56, 2009. https://doi.org/10.4012/dmj.28.44
- Molin M, Karlsson S. The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study. Acta Odontol Scand, 51(4), 201-206, 1993. https://doi.org/10.3109/00016359309040568
- Sturdevant JR, Bayne SC, Heymann HO. Margin gap size of ceramic inlays using secondgeneration CAD/CAM equipment. J Esthet Dent, 11(4), 206-214, 1999. https://doi.org/10.1111/j.1708-8240.1999.tb00400.x
- Ritter RG. Multifuncional uses of a novel ceramiclithium disilicate. J Esthet Restor Dent, 22(5), 332-341, 2010. https://doi.org/10.1111/j.1708-8240.2010.00362.x
- Reich S, Gozdowski S, Trentzsch L, Frankenberger R, Lohbauer U. Marginal fit of heat-pressed vs. CAD/CAM processed all-ceramic onlay using a milling unit prototype. Oper Dent, 33(6), 644-650, 2008. https://doi.org/10.2341/07-162
- Reich S, Gozdowski S, Lohbauer U. Measurement of cement thickness under lithium disilicate crowns using an impression material technique. Clin Oral Investig, 15(4), 521-526, 2011. https://doi.org/10.1007/s00784-010-0414-x
- Wang H, Liao Y, Chao Y, Liang X. Shrinkage and strength characterization of an aluminaglass interpenetrating phase composite for dental use. Dent Mater, 32(9), 1108-1113, 2009.
- Wiedhahn K. From blue to white: new highstrength material for Cerec-IPS e.max CAD LT. Int J Comput Dent, 10(1), 79-91, 2007.