새로운 CAD/CAM 블록의사용 : PICN and RNC

Novel CAD/CAM hybrid blocks: PICN and RNC

  • 고경호 (강릉원주대학교 치과대학 치과보철학교실)
  • Ko, Kyung-Ho (Department of Prosthodontics, College of Dentistry, Gangneung-Wonju National university)
  • 발행 : 2018.03.01

초록

The development of dental materials has widened the scope of materials by changes in processing methods. CAD/CAM processing enables the use of zirconia as a dental material. Recent esthetic materials development has been made. For aesthetic purposes, a block for CAD/CAM processing by mixing polymer and ceramic materials are fabricated. However there is no guideline of how these materials should be used in actual clinical practice. Mechanical properties, wear and clinical studies were reviewed.

키워드

참고문헌

  1. Ceci M, Pigozzo M, Scribante A, Beltrami R, Colombo M, Chiesa M, et al. Effect of glycine pretreatment on the shear bond strength of a CAD/CAM resin nano ceramic material to dentin. Journal of clinical and experimental dentistry. 2016;8(2):e146-52.
  2. Rocca GT, Sedlakova P, Saratti CM, Sedlacek R, Gregor L, Rizcalla N, et al. Fatigue behavior of resin-modified monolithic CAD-CAM RNC crowns and endocrowns. Dental materials : official publication of the Academy of Dental Materials. 2016;32(12):e338-e50. https://doi.org/10.1016/j.dental.2016.09.024
  3. Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. Journal of dental research. 2014;93(12):1232-4. https://doi.org/10.1177/0022034514553976
  4. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramicnetwork material. Dental materials : official publication of the Academy of Dental Materials. 2014;30(5):564-9. https://doi.org/10.1016/j.dental.2014.02.019
  5. He LH, Purton D, Swain M. A novel polymer infiltrated ceramic for dental simulation. Journal of materials science Materials in medicine. 2011;22(7):1639-43. https://doi.org/10.1007/s10856-011-4350-3
  6. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dental materials : official publication of the Academy of Dental Materials. 2013;29(4):419-26. https://doi.org/10.1016/j.dental.2013.01.002
  7. Harada A, Nakamura K, Kanno T, Inagaki R, Ortengren U, Niwano Y, et al. Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns. European journal of oral sciences. 2015;123(2):122-9. https://doi.org/10.1111/eos.12173
  8. Johnson AC, Versluis A, Tantbirojn D, Ahuja S. Fracture strength of CAD/CAM composite and composite-ceramic occlusal veneers. Journal of prosthodontic research. 2014;58(2):107-14. https://doi.org/10.1016/j.jpor.2014.01.001
  9. Chen C, Trindade FZ, de Jager N, Kleverlaan CJ, Feilzer AJ. The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses. Dental materials : official publication of the Academy of Dental Materials. 2014;30(9):954-62. https://doi.org/10.1016/j.dental.2014.05.018
  10. Shembish FA, Tong H, Kaizer M, Janal MN, Thompson VP, Opdam NJ, et al. Fatigue resistance of CAD/CAM resin composite molar crowns. Dental Materials. 2016;32(4):499-509. https://doi.org/10.1016/j.dental.2015.12.005
  11. Joda T, Huber S, Burki A, Zysset P, Bragger U. Influence of Abutment Design on Stiffness, Strength, and Failure of Implant-Supported Monolithic Resin Nano Ceramic (RNC) Crowns. Clinical implant dentistry and related research. 2015;17(6):1200-7. https://doi.org/10.1111/cid.12215
  12. Albero A, Pascual A, Camps I, Grau-Benitez M. Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network. Journal of clinical and experimental dentistry. 2015;7(4):e495-500.
  13. Awada A, Nathanson D. Mechanical properties of resin-ceramic CAD/CAM restorative materials. The Journal of prosthetic dentistry. 2015;114(4):587-93. https://doi.org/10.1016/j.prosdent.2015.04.016
  14. Curran P, Cattani-Lorente M, Anselm Wiskott HW, Durual S, Scherrer SS. Grinding damage assessment for CAD-CAM restorative materials. Dental materials : official publication of the Academy of Dental Materials. 2017;33(3):294-308. https://doi.org/10.1016/j.dental.2016.12.004
  15. Tsujimoto A, Barkmeier WW, Takamizawa T, Latta MA, Miyazaki M. Influence of Thermal Cycling on Flexural Properties and Simulated Wear of Computer-aided Design/Computer-aided Manufacturing Resin Composites. Operative dentistry. 2017;42(1):101-10. https://doi.org/10.2341/16-046-L
  16. Gungor MB, Nemli SK, Bal BT, Unver S, Dogan A. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials. J Adv Prosthodont. 2016;8(4):259-66. https://doi.org/10.4047/jap.2016.8.4.259
  17. Fasbinder DJ, Neiva GF. Surface Evaluation of Polishing Techniques for New Resilient CAD/CAM Restorative Materials. Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry [et al]. 2016;28(1):56-66. https://doi.org/10.1111/jerd.12174
  18. Elsaka SE. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: the effect of surface treatments. The journal of adhesive dentistry. 2014;16(6):531-40. https://doi.org/10.3290/j.jad.a33198
  19. Stawarczyk B, Krawczuk A, Ilie N. Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic. Clinical oral investigations. 2015;19(2):299-308. https://doi.org/10.1007/s00784-014-1269-3
  20. Duzyol M, Sagsoz O, Polat Sagsoz N, Akgul N, Yildiz M. The Effect of Surface Treatments on the Bond Strength Between CAD/CAM Blocks and Composite Resin. Journal of prosthodontics : official journal of the American College of Prosthodontists. 2016;25(6):466-71. https://doi.org/10.1111/jopr.12322
  21. Wiegand A, Stucki L, Hoffmann R, Attin T, Stawarczyk B. Repairability of CAD/CAM high-density PMMA- and composite-based polymers. Clinical oral investigations. 2015;19(8):2007-13. https://doi.org/10.1007/s00784-015-1411-x
  22. Mormann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. Journal of the mechanical behavior of biomedical materials. 2013;20:113-25. https://doi.org/10.1016/j.jmbbm.2013.01.003
  23. Lauvahutanon S, Takahashi H, Oki M, Arksornnukit M, Kanehira M, Finger WJ. In vitro evaluation of the wear resistance of composite resin blocks for CAD/CAM. Dental materials journal. 2015;34(4):495-502. https://doi.org/10.4012/dmj.2014-293
  24. Zhi L, Bortolotto T, Krejci I. Comparative in vitro wear resistance of CAD/CAM composite resin and ceramic materials. The Journal of prosthetic dentistry. 2016;115(2):199-202. https://doi.org/10.1016/j.prosdent.2015.07.011
  25. Dirxen C, Blunck U, Preissner S. Clinical performance of a new biomimetic double network material. The open dentistry journal. 2013;7:118-22. https://doi.org/10.2174/1874210620130904003
  26. Schepke U, Meijer HJ, Vermeulen KM, Raghoebar GM, Cune MS. Clinical Bonding of Resin Nano Ceramic Restorations to Zirconia Abutments: A Case Series within a Randomized Clinical Trial. Clinical implant dentistry and related research. 2016;18(5):984-92. https://doi.org/10.1111/cid.12382