References
- D. K. Shaeffer, MEMS inertial sensors: A tutorial overview, IEEE Commun. Mag. 51 (2013), no. 4, 100-109. https://doi.org/10.1109/MCOM.2013.6495768
- X. Zou, P. Thiruvenkatanathan, and A. A. Seshia, A seismicgrade resonant MEMS accelerometer, J. Microelectromechanical Syst. 23 (2014), no. 4, 768-770. https://doi.org/10.1109/JMEMS.2014.2319196
- M. Ghanbari and M. J. Yazdanpanah, Delay compensation of tilt sensors based on mems accelerometer using data fusion technique, IEEE Sens. J. 15 (2015), no. 3, 1959-1966. https://doi.org/10.1109/JSEN.2014.2366874
- S. A. Zotov et al., High quality factor resonant mems accelerometer with continuous thermal compensation, IEEE Sens. J. 15 (2015), no. 9, 5045-5052. https://doi.org/10.1109/JSEN.2015.2432021
- M. Tsai, Y. Liu, and W. Fang, A three-axis CMOS- MEMS accelerometer structure with vertically integrated fully differential sensing electrodes, J. Microelectromechanical Syst. 21 (2012), no. 6, 1329-1337. https://doi.org/10.1109/JMEMS.2012.2205904
- S. Tez et al., A bulk-micromachined three-axis capacitive MEMS accelerometer on a single die, J. Microelectromechanical Syst. 24 (2015), no. 5, 1264-1274. https://doi.org/10.1109/JMEMS.2015.2451079
- V. Petkov, G. Balachandran, and J. Beintner, A fully differential charge-balanced accelerometer for electronic stability control, IEEE J. Solid-State Circuits 49 (2014), no. 1, 262-270. https://doi.org/10.1109/JSSC.2013.2284348
- N. N. Hewa-Kasakarage et al., Micromachined piezoelectric accelerometers via epitaxial silicon cantilevers and bulk silicon proof masses, J. Microelectromechanical Syst. 22 (2013), no. 6, 1438-1446. https://doi.org/10.1109/JMEMS.2013.2262581
- A. Kazama, T. Aono, and R. Okada, Stress relaxation mechanism with a ring-shaped beam for a piezoresistive three-axis accelerometer, J. Microelectromechanical Syst. 22 (2013), no. 2, 386-394. https://doi.org/10.1109/JMEMS.2012.2227139
- K. Zandi, J. Belanger, and Y. Peter, Design and demonstration of an in-plane silicon-on-insulator optical MEMS Fabry Perot-based accelerometer integrated with channel waveguides, J. Microelectromechanical Syst. 21 (2012), no. 6, 1464-1470. https://doi.org/10.1109/JMEMS.2012.2211577
- O. Solgaard et al., Optical MEMS: From micromirrors to complex systems, J. Microelectromechanical Syst. 23 (2014), no. 3, 517-538. https://doi.org/10.1109/JMEMS.2014.2319266
- A. Sheikhaleh, K. Abedi, and K. Jafari, A proposal for an optical MEMS accelerometer relied on wavelength modulation with one dimensional photonic crystal, J. Lightwave Technol. 34 (2016), no. 22, 5244-5249. https://doi.org/10.1109/JLT.2016.2597539
- M. Kohler, T. Heaton, and M. Cheng, The community seismic network and quake-catcher network: Enabling structural health monitoring through instrumentation by community participants, Proc. SPIE 8692 (2013) 86923X:1-86923X:8.
- A. Sabato et al., A novel wireless accelerometer board for measuring low-frequency and low-amplitude structural vibration, IEEE Sens. J. 16 (2016), no. 9, 2942-2949. https://doi.org/10.1109/JSEN.2016.2522940
- T. Guan et al., MOEMS uniaxial accelerometer based on Epo-Clad/EpoCore photoresists with built-in fiber clamp, Sens. Actuators A: Phys. 193 (2013), 95-102. https://doi.org/10.1016/j.sna.2012.12.030
- A. K. Geim and K. S. Novoselov, The rise of graphene, Nature Mat. 6 (2007), 183-191. https://doi.org/10.1038/nmat1849
- A. C. Ferrari et al., Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, Nanoscale 7 (2015), no. 11, 4598-4810. https://doi.org/10.1039/C4NR01600A
- C. Lee et al., Measurement of the elastic properties and intrinsic strength of monolayer graphene, Sci. 321 (2008), 385-388. https://doi.org/10.1126/science.1157996
- J. Lee, D. Yoon, and H. Cheong, Estimation of Young's modulus of graphene by Raman spectroscopy, Nano Lett. 12 (2012), no. 9, 4444-4448. https://doi.org/10.1021/nl301073q
- X. Zang et al., Graphene and carbon nanotube (CNT) in MEMS/NEMS applications, Microelectronic Eng. 132 (2015), no. C, 192-206. https://doi.org/10.1016/j.mee.2014.10.023
- Z. H Khan et al., Mechanical and electromechanical properties of graphene and their potential application in MEMS, J. Phys. D: Appl. Phys. 50 (2017), no. 5, 053003:1-053003:24.
- F. Schwierz, Graphene transistors, Nature Nanotechnol. 5 (2010), no. 7, 487-496. https://doi.org/10.1038/nnano.2010.89
- A. Krajewska et al., Fabrication and applications of multi-layer graphene stack on transparent polymer, Appl. Phys. Lett. 110 (2017), no. 4, 041901:1-041901:5.
- A. D. Smith et al., Electromechanical piezoresistive sensing in suspended graphene membranes, Nano Lett. 13 (2013), no. 7, 3237-3242. https://doi.org/10.1021/nl401352k
- C. Martin-Olmos et al., Graphene MEMS: AFM probe performance improvement, ACS Nano 7 (2013), no. 5, 4164-4170. https://doi.org/10.1021/nn400557b
- W. Ren and H. Cheng, The global growth of graphene, Nature Nanotechnol. 9 (2014), no. 10, 726-730. https://doi.org/10.1038/nnano.2014.229
- A. Sheikhaleh et al., Micro-optoelectromechanical systems accelerometer based on intensity modulation using a one-dimensional photonic crystal, Appl. Opt. 55 (2016), no. 32, 8993-8999. https://doi.org/10.1364/AO.55.008993
- Z. Djuric, Mechanisms of noise sources in microelectromechanical systems, Microelectron. Reliability 40 (2000), no. 6, 919-932. https://doi.org/10.1016/S0026-2714(00)00004-4
- F. Mohd-Yasin, D. J. Nagel, and C. E. Korman, Noise in MEMS, Meas. Sci. Technol. 21 (2009), no. 1, 012001:1-012001:22.
- A. L. Hsu et al., Graphene-based thermopile for thermal imaging applications, Nano Lett. 15 (2015), no. 11, 7211-7216. https://doi.org/10.1021/acs.nanolett.5b01755
- Y. Zhang et al., Direct observation of a widely tunable bandgap in bilayer graphene, Nature 459 (2009), 820-823. https://doi.org/10.1038/nature08105
- C. Lui et al., Observation of an electrically tunable band gap in trilayer graphene, Nature Phys. 7 (2011), no. 12, 944-947. https://doi.org/10.1038/nphys2102
- I. A. Ovidko, Mechanical properties of graphene, Rev. Adv. Mater. Sci. 34 (2013), no. 1, 1-11.
- Z. Xu and C. Gao, Graphene fiber: A new trend in carbon fibers, Mater. Today 18 (2015), no. 9, 480-492. https://doi.org/10.1016/j.mattod.2015.06.009
- Z. Fang et al., Active tunable absorption enhancement with graphene nanodisk arrays, Nano Lett. 14 (2013), no. 1, 299-304. https://doi.org/10.1021/nl404042h
- S. Lee et al., Angle-and position-insensitive electrically tunable absorption in graphene by epsilon-near-zero effect, Opt. Express 23 (2015), no. 26, 33350-33358. https://doi.org/10.1364/OE.23.033350
- H. Min and A. H. MacDonald, Origin of universal optical conductivity and optical stacking sequence identification in multilayer graphene, Phys. Rev. Lett. 103 (2009), no. 6, 067402:1-067402:6.
- S. Zhu, S. Yuan, and G. Janssen, Optical transmittance of multilayer graphene, EPL (Europhysics Lett.) 108 (2014), no. 1, 17007:1-17007:4.
- O. Legendre et al., A low-cost built-in self-test method for thermally actuated resistive MEMS sensors, Sens. Actuators A: Phys. 194 (2013), 8-15. https://doi.org/10.1016/j.sna.2013.01.013
- K. Jafari, A parameter estimation approach based on binary measurements using maximum likelihood analysis-Application to MEMS, Int. J. Control Autom. Syst. 15 (2017), no. 2, 716-721. https://doi.org/10.1007/s12555-015-0343-1
Cited by
- Fab-compatible nano-lens array integration for optically efficient flexible top-emitting organic light-emitting diodes vol.58, pp.4, 2018, https://doi.org/10.7567/1347-4065/ab0494
- Optical MEMS accelerometer sensor relying on a micro‐ring resonator and an elliptical disk vol.13, pp.7, 2019, https://doi.org/10.1049/iet-cds.2019.0029
- Towards Repeatable, Scalable Graphene Integrated Micro-Nano Electromechanical Systems (MEMS/NEMS) vol.13, pp.1, 2018, https://doi.org/10.3390/mi13010027