Computers and Concrete

  • 제22권5호
  • /
  • Pages.481-492
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The relationship between reinforcing index and flexural parameters of new hybrid fiber reinforced slab

  • Cao, Mingli (School of Civil Engineering, Dalian University of Technology) ;
  • Xie, Chaopeng (School of Civil Engineering, Dalian University of Technology) ;
  • Li, Li (School of Civil Engineering, Dalian University of Technology) ;
  • Khan, Mehran (School of Civil Engineering, Dalian University of Technology)
  • 투고 : 2018.05.23
  • 심사 : 2018.11.16
  • 발행 : 2018.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a new hybrid fiber system (NHFS) is investigated for the application of slab. The steel fiber, polyvinyl alcohol (PVA) fiber and calcium carbonate ($CaCO_3$) whisker is added to form NHFS. The four-point bending test is carried out on the flexural properties of slab with plain, steel fiber, traditional hybrid fiber system (THFS) and NHFS reinforced cementitious composites. The flexural behavior is evaluated by ASTM C1018-97, JCI-SF4 and post-crack strength (PCS) technique. The evaluation parameters of flexural toughness such as toughness index (TI), equivalent flexural strength (EFS) and PCS are determined. The size of slab specimens is $15mm(thickness){\times}50mm(width){\times}200mm(length)$. The results show that adding $CaCO_3$ whisker to THFS can significantly improve the flexural strength, TI, EFS, PCS of the slab. The empirical relation between reinforcing index ($RI_v$) and flexural parameters show that flexural parameters of slabs increase first and then decrease; which indicates that optimum $RI_v$ values can be helpful in the considering the mix design of steel-PVA fibers-$CaCO_3$ whisker composites for achieving the desired flexural-related properties. The scanning electron microscopy is performed to observe the micro-morphological characteristics of the fracture surface, which proved the positive hybrid effect among the different fibers in cementitious composites. The NHFS can arrest the generation and propagation of the crack from micro to macro level.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China

참고문헌

  1. Abadel, A.A. (2015), "Mechanical properties of hybrid fibrereinforced concrete-analytical modelling and experimental behavior", Mag. Concrete Res., 68(16), 823-843. https://doi.org/10.1680/jmacr.15.00276
  2. Ahmed, S.F.U., Maalej, M. and Paramasivam, P. (2007), "Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash", Constr. Build. Mater., 21(5), 1088-1097. https://doi.org/10.1016/j.conbuildmat.2006.01.002
  3. Alberti, M.G., Enfedaque, A. and Galvez, J.C. (2016), "Fracture mechanics of polyolefin fibre reinforced concrete: study of the influence of the concrete properties, casting procedures, the fibre length and specimen size", Eng. Fract. Mech., 154, 225-244. https://doi.org/10.1016/j.engfracmech.2015.12.032
  4. Almusallam, T., Ibrahim, S.M., Al-Salloum, Y., Abadel, A. and Abbas, H. (2016), "Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete", Cement Concrete Compos., 74, 201-217. https://doi.org/10.1016/j.cemconcomp.2016.10.002
  5. Arslan, M.E. (2016), "Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: cmod measurement", Constr. Build. Mater., 114, 383-391. https://doi.org/10.1016/j.conbuildmat.2016.03.176
  6. ASTM C 1018 (1997), Standard Test Method for Flexural Toughness and First Crack Strength of Fiber Reinforced Concrete (using Beam with Third-point Loading), American Society for Testing and Materials,West Conshohocken, PA.
  7. ASTM C1609/1609M (2012), Standard Test Method for Flexural Performance of Fiber-reinforced Concrete (using Beam with Third-point Loading), American Society for Testing and Materials, West Conshohocken, PA.
  8. Atahan, H.N., Tuncel, E.Y. and Pekmezci, B.Y. (2013), "Behavior of pva fiber-reinforced cementitious composites under static and impact flexural effects", J. Mater. Civil Eng., 25(10), 1438-1445. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000691
  9. Banthia, N. and Trottier, J.F. (1995), "Test methods for flexural toughness characterization of fiber reinforced concrete: some concerns and a proposition", ACI Mater. J., 92(1), 48-57.
  10. Cao, M. and Li, L. (2018), "New models for predicting workability and toughness of hybrid fiber reinforced cementbased composites", Constr. Build. Mater., 176, 618-628. https://doi.org/10.1016/j.conbuildmat.2018.05.075
  11. Cao, M., Li, L., Li, Z. and Si, W. (2017), "Influence of $CaCO_3$ whisker on flexural behavior of steel-polyvinyl alcohol hybrid fiber reinforced cement-based composite slabs", Acta Materiae Compositae Sinica, 11(34), 2614-2623.
  12. Cao, M., Zhang, C. and Lv, H. (2014b), "Mechanical response and shrinkage performance of cementitious composites with a new fiber hybridization", Constr. Build. Mater., 57(5), 45-52. https://doi.org/10.1016/j.conbuildmat.2014.01.088
  13. Cao, M., Zhang, C. and Wei, J. (2013), "Microscopic reinforcement for cement based composite materials", Constr. Build. Mater., 40(3), 14-25. https://doi.org/10.1016/j.conbuildmat.2012.10.012
  14. Cao, M., Zhang, C., Li, Y. and Wei, J. (2015), "Using calcium carbonate whisker in hybrid fiber-reinforced cementitious composites", J. Mater. Civil Eng., 27(4), 04014139. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001041
  15. Cao, M., Zhang, C., Lv, H. and Xu, L. (2014a), "Characterization of mechanical behavior and mechanism of calcium carbonate whisker-reinforced cement mortar", Constr. Build. Mater., 66(1), 89-97. https://doi.org/10.1016/j.conbuildmat.2014.05.059
  16. Cao, P., Feng, D., Zhou, C. and Zuo, W. (2014), "Study on fracture behavior of polypropylene fiber reinforced concrete with bending beam test and digital speckle method", Comput. Concrete, 14(5), 527-546. https://doi.org/10.12989/cac.2014.14.5.527
  17. CECS38 (2004), Technical Specification for Fiber Reinforced Concrete Structures, China Association for engineering construction standardization, China Architecture & Building Press, Beijing, China.
  18. Demir, A. (2015), "Prediction of hybrid fibre-added concrete strength using artificial neural networks", Comput. Concrete, 15(4), 503-514. https://doi.org/10.12989/cac.2015.15.4.503
  19. JCI-SF4 (1983), JCI Standards for Test Methods of Fiber Reinforced Concrete, Methods of Tests for Flexural Strength and Flexural Toughness of Fiber Reinforced Concrete, Japan Concrete Institute.
  20. Kazemi, M.T., Golsorkhtabar, H., Beygi, M.H.A. and Gholamitabar, M. (2017), "Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods", Constr. Build. Mater., 142, 482-489. https://doi.org/10.1016/j.conbuildmat.2017.03.089
  21. Khan, M. and Ali, M. (2016), "Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks", Constr. Build. Mater., 125, 800-808. https://doi.org/10.1016/j.conbuildmat.2016.08.111
  22. Kim, J.S., Lee, H.J. and Choi, Y. (2013), "Mechanical properties of natural fiber-reinforced normal strength and high-fluidity concretes", Comput. Concrete, 11(6), 531-539. https://doi.org/10.12989/cac.2013.11.6.531
  23. Lawler, J.S., Zampini, D. and Shah, S.P. (2016), "Microfiber and macrofiber hybrid fiber-reinforced concrete", J. Mater. Civil Eng., 17(5), 595-604. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(595)
  24. Li, V. (2007), "Progress and application of engineered cementitious composites", J. Chin. Ceramic Soc., 35(4), 531-536. https://doi.org/10.3321/j.issn:0454-5648.2007.04.026
  25. Najigivi, A., Nazerigivi, A. and Nejati, H.R. (2017), "Contribution of steel fiber as reinforcement to the properties of cement-based concrete: a review", Comput. Concrete, 20(2), 155-164. https://doi.org/10.12989/CAC.2017.20.2.155
  26. Pereira, E.B., Fischer, G. and Barros, J. (2012), "Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites", Cement Concrete Compos., 34(10), 1114-1123. https://doi.org/10.1016/j.cemconcomp.2012.08.004
  27. Pichler, C., Lackner, R. and Mang, H.A. (2008), "Multiscale model for creep of shotcrete - from logarithmic-type viscous behavior of csh at the. mu.m-scale to macroscopic tunnel analysis", J. Adv. Concrete Technol., 6(1), 91-110. https://doi.org/10.3151/jact.6.91
  28. Qian, C. and Stroeven, P. (2000), "Fracture properties of concrete reinforced with steel- polypropylene hybrid fibres", Cement Concrete Compos., 22(5), 343-351. https://doi.org/10.1016/S0958-9465(00)00033-0
  29. Said, S.H. and Razak, H.A. (2015b), "The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ecc)", Mater. Des., 86, 447-457. https://doi.org/10.1016/j.matdes.2015.07.125
  30. Said, S.H., Razak, H.A. and Othman, I. (2015a), "Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers", Constr. Build. Mater., 75, 176-188. https://doi.org/10.1016/j.conbuildmat.2014.10.036
  31. Soleimani, S.M. and Banthia, N. (2005), "Flexural response of hybrid fiber-reinforced cementitious composites", ACI Mater. J., 102(6), 382-389.
  32. Sun, W., Chen, H., Luo, X. and Qian, H. (2001), "The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete", Cement Concrete Res., 31(4), 595-601. https://doi.org/10.1016/S0008-8846(00)00479-8
  33. Tuan, B.L.A., Tesfamariam, M.G., Hwang, C.L., Chen, C.T., Chen, Y.Y. and Lin, K.L. (2014), "Effect of fiber type and content on properties of high-strength fiber reinforced selfconsolidating concrete", Comput. Concrete, 14(3), 299-313. https://doi.org/10.12989/cac.2014.14.3.299
  34. Yun, H.D., Fukuyama, H., Jeon, E., Yang, I.S., Choi, C.S. and Kim, S.W. (2007), "Mechanical properties of high-performance hybrid-fiber-reinforced cementitious composites (HPHFRCCs)", Mag. Concrete Res., 59(4), 257-271. https://doi.org/10.1680/macr.2007.59.4.257
  35. Zhang, C. and Cao, M. (2014), "Fiber synergy in multi-scale fiber-reinforced cementitious composites", J. Reinf. Plast. Compos., 33(9), 862-874. https://doi.org/10.1177/0731684413514785
  36. Zhang, J., Wang, Q. and Wang, Z. (2017), "Properties of polyvinyl alcohol-steel hybrid fiber reinforced composite with highstrength cement matrix", J. Mater. Civil Eng., 29(7), 04017026. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001868