Computers and Concrete

  • 제22권5호
  • /
  • Pages.461-468
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Micro-concrete composites for strengthening of RC frame made of recycled aggregate concrete

  • Marthong, Comingstarful (Department of Civil Engineering, National Institute of Technology Meghalaya) ;
  • Pyrbot, Risukka N. (Department of Civil Engineering, National Institute of Technology Meghalaya) ;
  • Tron, Stevenly L. (Department of Civil Engineering, National Institute of Technology Meghalaya) ;
  • Mawroh, Lam-I D. (Department of Civil Engineering, National Institute of Technology Meghalaya) ;
  • Choudhury, Md. Sakil A. (Department of Civil Engineering, National Institute of Technology Meghalaya) ;
  • Bharti, Ganesh S. (Department of Civil Engineering, National Institute of Technology Meghalaya)
  • 투고 : 2018.02.16
  • 심사 : 2018.11.16
  • 발행 : 2018.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, to access the suitability of recycled aggregate for structural applications, concrete strength i.e., compressive, tensile and flexural strength were evaluated and compared with those specimens made of natural aggregates. Test results indicated that 30 to 42% of the mentioned strength decreases. To study the performance of frame structures made of recycled aggregate concrete (RAC) two reinforced RAC frames were prepared and tested under monotonic loading. The joint regions of one of the RAC frame were casted with micro-concrete. A reference specimen was also prepared using natural aggregate concrete (NAC) and subjected to a similar loading condition. The RAC frame resulted in a brittle mode of failure as compared to NAC frame. However, the presence of a micro-concrete at the joint region of an RAC frame improved the damage tolerance and load resisting capacity. Seismic parameter such as energy dissipation, ductility and stiffness also improves. Conclusively, strengthening of joint region using micro-concrete is found to have a significant contribution in improving the seismic performance of an RAC frame.

키워드

참고문헌

  1. Abdollahzadeh, G., Jahani, J. and Kashir, Z. (2016), "Predicting of compressive strength of recycled aggregate concrete by genetic programming", Comput. Concrete, 18(2), 155-163. https://doi.org/10.12989/cac.2016.18.2.155
  2. ACI Committee 318-08 (2008), Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (ACI 318R-08), American Concrete Institute, Farmington Hills, MI.
  3. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Compos., 2, 269-279.
  4. Ashish, D.K. and Saini, P. (2018), "Successive recycled coarse aggregate effect on mechanical behavior and microstructural characteristics of concrete", Comput. Concrete, 21(1), 39-46. https://doi.org/10.12989/CAC.2018.21.1.039
  5. Balaji, S. and Thirugnanam, G.S. ( 2016), "Study on exterior RC beam-column joints upgrade with SIFCON in joint core under reversed cyclic loading", KSCE J. Civil Eng., 21(1), 346-352.
  6. Behera, M., Bhattacharyya, S.K., Minocha, A.K., Deoliya, R. and Maiti, S. (2014), "Recycled aggregate from C&D waste & its use in concrete-A breakthrough towards sustainability in construction sector: A review", Constr. Build. Mater., 68, 501-516. https://doi.org/10.1016/j.conbuildmat.2014.07.003
  7. Brito, J., de., Ferreira, J., Soares, D. and Guerreiro, M. (2016), "Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete", J. Build. Eng., 6, 1-6. https://doi.org/10.1016/j.jobe.2016.02.003
  8. Chao, L., Guoliang, B., Letian, W. and Zonggang, Q. (2010), "Experimental study on the compression behavior of recycled concrete columns", Proceedings of the International RILEM Conference on the Waste Engineering and Management, 614-621.
  9. Corinaldesi, V. and Moriconi, G. (2006), "Behavior of beamcolumn joints made of sustainable concrete under cyclic loading", J. Mater. Civil Eng., 18(5), 650-658. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:5(650)
  10. Corinaldesi, V., Letelier, V. and Moriconi, G. (2011), "Behavior of beam-column joints made of recycled-aggregate concrete under cyclic loading", Constr. Build. Mater., 2, 1877-1882.
  11. Dhaval, K., Scott, R.H., Deb, S.K. and Dutta, A. (2015), "Ductility enhancement in beam-column connections using hybrid fiber-reinforced concrete", ACI Struct. J., 112(2), 167-178. https://doi.org/10.14359/51687405
  12. Faleschini, F., Bragolusi, P., Zanini, M.A., Zampieri, P. and Pellegrino, C. (2017), "Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete", Eng. Struct., 152, 335-347. https://doi.org/10.1016/j.engstruct.2017.09.022
  13. Ghani, K.D.A. and Hamid, N.H.A. (2013), "Comparing the seismic performance of beam-column joints with and without SFRC when subjected to cyclic loading", Adv. Mater. Res., 626, 85-89.
  14. Gonzalez, V.C.L. and Moriconi, G. (2014), "The influence of recycled concrete aggregates on the behavior of beam-column joints under cyclic loading", Eng. Struct., 60, 148-154. https://doi.org/10.1016/j.engstruct.2013.12.024
  15. Hadi, M.N.S. (2006), "Behavior of FRP wrapped normal strength concrete column under eccentric loading", Compos. Struct., 72, 503-511. https://doi.org/10.1016/j.compstruct.2005.01.018
  16. Hadi, M.N.S. (2007), "Behavior of FRP strengthened concrete columns under eccentric compression loading", Compos. Struct., 77(1), 92-96. https://doi.org/10.1016/j.compstruct.2005.06.007
  17. Hamad, B.S., Daw, A.H., Daou, A. and Chehab, G.R. (2018), "Studies of the effect of recycled aggregates on flexural, shear, and bond splitting beam structural behavior", Case Stud. Constr. Mater., 9, e00186. https://doi.org/10.1016/j.cscm.2018.e00186
  18. Han, B.C., Yun, H.D. and Chung, S.Y. (2001), "Shear capacity of reinforced concrete beams made with recycled aggregate", ACI Spec. Pub., 200, 503-516.
  19. Hansen, T.C. (1992), Recycling of Demolished Concrete and Masonry, Taylor and Francis, Oxfordshire, UK.
  20. IS 10262 (2009), Guidelines for Concrete Mix Design Proportioning (CED 2: Cement and Concrete), Bureau of Indian Standard New Delhi.
  21. IS 1199 (1959), Methods of Sampling and Analysis of Concrete, Bureau of Indian Standard New Delhi.
  22. IS 13920 (2016), Ductile Detailing of Teinforced Concrete Structures Subjected to Seismic Forces-Code of Practice, Bureau of Indian Standard New Delhi.
  23. IS 1608 (1995), Mechanical Testing of Metals-Tensile Testing, Bureau of Indian Standard New Delhi
  24. IS 2386a (1963), Methods of Test for Aggregates for Concrete-Part 1: Particle Size and Shape, Bureau of Indian Standard New Delhi.
  25. IS 2386b (1963), Methods of Test for Aggregates for Concrete-Part 3: Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standard New Delhi.
  26. IS 432 (1) (1982), Specification for Mild Steel and Medium Tensile Steel Bars and Hard-drawn Steel Wire for Concrete Reinforcement: Part I Mild Steel and Medium Tensile Steel Bars, Bureau of Indian Standard New Delhi.
  27. IS 456 (2000), Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standard New Delhi.
  28. IS 519 (1959), Method of Tests for Strength of Concrete, Bureau of Indian Standard New Delhi.
  29. IS 5816 (1999), Method of Test Splitting Tensile Strength, Bureau of Indian Standard New Delhi.
  30. IS 8112 (1989), 43 Grade Ordinary Portland Cement-Specification, Bureau of Indian Standard New Delhi.
  31. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of exterior beam-column joints using thin RC jackets-An experimental study", Earthq. Eng. Struct. Dyn., 37, 727-746. https://doi.org/10.1002/eqe.783
  32. Kwan, W.H., Ramli, M., Kam, K.J. and Sulieman, M.Z. (2012), "Influence of the amount of recycled coarse aggregate in concrete design and durability properties", Constr. Build. Mater., 26(1), 565-573. https://doi.org/10.1016/j.conbuildmat.2011.06.059
  33. Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004), "Performance of recycled aggregate concrete", RILEM International Symposium on Environment Conscious Materials and System for Sustainable Development, 127-136.
  34. Marthong, C. (2018), "Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region", Comput. Concrete, 21(6), 669-679. https://doi.org/10.12989/CAC.2018.21.6.669
  35. Marthong, C., Dutta, A. and Deb, S.K. (2013), "Seismic rehabilitation of RC exterior beam-column connections using epoxy resin injection", J. Earthq. Eng., 17(3), 378-398. https://doi.org/10.1080/13632469.2012.738284
  36. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures from Theory to Practice, John Willey & Sons, Inc.
  37. Oinam, R.M., Sahoo, D.R. and Sindhu, R. (2014), "Cyclic response of non-ductile RC frame with steel fibers at beamcolumn joints and plastic hinge regions", J. Earthq. Eng., 18(6), 908-928. https://doi.org/10.1080/13632469.2014.916239
  38. Padmini, A.K., Ramamurthy, K. and Mathews, M.S. (2009), "Influence of parent concrete on the properties of recycled aggregate concrete", Constr. Build. Mater., 23, 829-836. https://doi.org/10.1016/j.conbuildmat.2008.03.006
  39. Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  40. Pellegrino, C. and Faleschini, F. (2016), "Recycled aggregates for concrete production: State-of-the-art. In: Sustainability improvements in the concrete industry", Green Energy and Technology, Springer, Cham.
  41. Qudah, S. and Maalej, M. (2014), "Application of engineered cementitious (ECC) in interior beam-column connections for enhanced seismic resistance", Constr. Build. Mater., 69, 235-245.
  42. Qureshi, L.A. and Muhammad, U. (2018), "Effects of incorporating steel and glass fibers on shear behavior of concrete column-beam joints", KSCE J. Civil Eng., 22(8), 2970-2981. https://doi.org/10.1007/s12205-017-0037-8
  43. Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44, 205-220. https://doi.org/10.1617/s11527-010-9620-x
  44. Said, S.H. and Razak, H.A. (2016), "Structural behavior of RC engineered cementitious composites (ECC) exterior beamcolumn joints under reversed cyclic loading", Constr. Build. Mater., 107, 226-234. https://doi.org/10.1016/j.conbuildmat.2016.01.001
  45. Sezen, H., Elwood, K.J., Whittaker, A.S., Mosalam, K.M., Wallace, J.W. and Stanton, J.F. (2000), "Structural engineering reconnaissance of the August 17, 1999 Earthquake", Kocaeli (Izmit), Turkey, PEER 2000/09, University of California, Berkeley, USA.
  46. Shakya, K., Watanabe, K., Matsumoto, K. and Niwa, J. (2012), "Application of steel fibers in beam-column joints of rigidframed railway bridges to reduce longitudinal and shear rebars", Constr. Build. Mater., 27, 482-489. https://doi.org/10.1016/j.conbuildmat.2011.07.016
  47. Shannag M.J. and Ziyyad, T.B. (2007), "Flexural response of ferrocement with fibrous cementitious matrices", Constr. Build. Mater., 21(6), 1198-1205. https://doi.org/10.1016/j.conbuildmat.2006.06.021
  48. Shannag, M.J. and Alhassan, M.A. (2005), "Seismic upgrade of interior beam-column sub-assemblages with high performance fiber reinforced concrete jackets", ACI Struct. J., 102(1), 131-138.
  49. Shayan, A. and Xu, A. (2002), "Performance and properties of structural concrete made with recycled concrete aggregate", ACI Mater. J., 100, 371-380.
  50. Tabsh, S.W. and Abdelfatah, A.S. (2009), "Influence of recycled concrete aggregates on strength properties of concrete", Constr. Build. Mater., 23, 1163-1167. https://doi.org/10.1016/j.conbuildmat.2008.06.007
  51. Tripura, D.B., SRaj, S., Mohammad, S. and Das, R. (2018), "Suitability of recycled aggregate as a replacement for natural aggregate in construction", Journal of the ACI Conference, 326-337
  52. Xiao, J., Li, J. and Zhang, C. (2005), "Mechanical properties of recycled aggregate concrete under uniaxial loading", Cement Concrete Res., 35(6), 1187-1194. https://doi.org/10.1016/j.cemconres.2004.09.020
  53. Xiao, J., Sun, Y. and Falkner, H. (2006), "Seismic performance of frame structures with recycled aggregate concrete", Eng. Struct., 28, 1-8. https://doi.org/10.1016/j.engstruct.2005.06.019
  54. Xiao, J.Z., Li, W., Fan, Y. and Huang, X. (2012), "An overview of study on recycled aggregate concrete in China (1996-2011)", Constr. Build. Mater., 31, 364-383. https://doi.org/10.1016/j.conbuildmat.2011.12.074

피인용 문헌

  1. Residual Properties and Axial Bearing Capacity of Steel Reinforced Recycled Aggregate Concrete Column Exposed to Elevated Temperatures vol.7, pp.None, 2018, https://doi.org/10.3389/fmats.2020.00187