Smart Structures and Systems

  • 제22권5호
  • /
  • Pages.587-609
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A hybrid structural health monitoring technique for detection of subtle structural damage

  • Krishansamy, Lakshmi (Department of Structural Health Monitoring, CSIR-Structural Engineering Research Centre) ;
  • Arumulla, Rama Mohan Rao (Department of Structural Health Monitoring, CSIR-Structural Engineering Research Centre)
  • 투고 : 2018.06.06
  • 심사 : 2018.10.11
  • 발행 : 2018.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

There is greater significance in identifying the incipient damages in structures at the time of their initiation as timely rectification of these minor incipient cracks can save huge maintenance cost. However, the change in the global dynamic characteristics of a structure due to these subtle damages are insignificant enough to detect using the majority of the current damage diagnostic techniques. Keeping this in view, we propose a hybrid damage diagnostic technique for detection of minor incipient damages in the structures. In the proposed automated hybrid algorithm, the raw dynamic signatures obtained from the structure are decomposed to uni-modal signals and the dynamic signature are reconstructed by identifying and combining only the uni-modal signals altered by the minor incipient damage. We use these reconstructed signals for damage diagnostics using ARMAX model. Numerical simulation studies are carried out to investigate and evaluate the proposed hybrid damage diagnostic algorithm and their capability in identifying minor/incipient damage with noisy measurements. Finally, experimental studies on a beam are also presented to compliment the numerical simulations in order to demonstrate the practical application of the proposed algorithm.

키워드

참고문헌

  1. Arhant, M., Meek, N., Penumadu, D. et al. (2018), "Residual strains using integrated continuous fiber optic sensing in thermoplastic composites and structural health monitoring", Exp. Mech., 58(1), 167-176. https://doi.org/10.1007/s11340-017-0339-2
  2. Avendano-Valencia, L.D. and Fassois, S.D. (2015), "Natural vibration response based damage detection for an operating wind turbine via Random Coefficient Linear Parameter Varying AR modelling", J. Physics: Conference Series, 628(1), 012073, IOP Publishing. https://doi.org/10.1088/1742-6596/628/1/012073
  3. Bodeux, J.B. and Golinval, J.C. (2001), "Application of ARMAV models to the identification and damage detection of mechanical and civil engineering structures", Smart Mater. Sstruct., 10(3), 479-489. https://doi.org/10.1088/0964-1726/10/3/309
  4. Coughlin, K. and Tung, K.K. (2005), "Empirical mode decomposition and climate variability", In Hilbert-Huang Transform and its Applications, 223-239, Interdisciplinary Mathematical Sciences.
  5. Das, S., Saha, P. and Patro, S.K. (2016), "Vibration-based damage detection techniques used for health monitoring of structures: a review", J. Civil Struct. Health Monit., 6(3), 477-507. https://doi.org/10.1007/s13349-016-0168-5
  6. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Dig., 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  7. Dorvash, S., Pakzad, S.N. and LaCrosse, E.L. (2014), "Statistics based localized damage detection using vibration response", Smart Struct. Syst., 14(2), 85-104. https://doi.org/10.12989/sss.2014.14.2.085
  8. Dosiek, L. and Pierre, J.W. (2013), "Estimating electromechanical modes and mode shapes using the multichannel ARMAX model", IEEE T. Power Syst., 28(2), 1950-1959. https://doi.org/10.1109/TPWRS.2013.2252928
  9. Fan, X., Li, J. and Hao, H. (2016), "Piezoelectric impedance based damage detection in truss bridges based on time frequency ARMA model", Smart Struct. Syst., 18(3), 501-523. https://doi.org/10.12989/sss.2016.18.3.501
  10. Farrar, C.R., Sohn, H. and Worden, K. (2001), "Data normalization: a key for structural health monitoring",No. LAUR-01-4212, Los Alamos National Laboratory.
  11. Fassois, S.D. and Sakellariou, J.S. (2007), "Time-series methods for fault detection and identification in vibrating structures", Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 365(1851), 411-448. https://doi.org/10.1098/rsta.2006.1929
  12. Fassois, S.D. and Sakellariou, J.S. (2009), "Statistical time series methods for SHM", Encyclopedia of structural health monitoring.
  13. Foti, S. and Sabia, D. (2010), "Influence of foundation scour on the dynamic response of an existing bridge", J. Bridge Eng., 16(2), 295-304. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000146
  14. Fugate, M.L., Sohn, H. and Farrar, C.R. (2001), "Vibration-based damage detection using statistical process control", Mech. Syst. Signal Pr., 5(4), 707-721.
  15. Gao, Y., Ge, G., Sheng, Z. et al. (2008), "Analysis and solution to the mode mixing phenomenon in EMD", Image and Signal Processing, (CISP'08), 5, 223-227, IEEE.
  16. Golinval, J.C. (2017), "Damage detection in structures based on principal component analysis of forced harmonic responses", Procedia Eng., 199, 1912-1918. https://doi.org/10.1016/j.proeng.2017.09.449
  17. Hsu, W.K., Chiou, D.J., Chen, C.W., Liu, M.Y., Chiang, W.L. and Huang, P.C. (2014), "A case study of damage detection in four-bays steel structures using the HHT approach", Smart Struct. Syst., 14(4), 595-615. https://doi.org/10.12989/sss.2014.14.4.595
  18. Hu, M.H., Tu, S.T. and Xuan, F.Z. (2015), "Statistical moments of ARMA (n, m) model residuals for damage detection", Procedia Eng., 130, 1622-1641. https://doi.org/10.1016/j.proeng.2015.12.351
  19. Huang, N.E. (2005), "Introduction to Hilbert-Huang transform and some recent developments", Hilbert-Huang Transform in Engineering. Taylor & Francis, Boca Raton, 1-24.
  20. Huang, N.E. (2014), "Hilbert-Huang transform and its applications", 16, World Scientific Publishing Company.
  21. Jayawardhana, M., Zhu, X., Liyanapathirana, R. et al. (2015), "Statistical damage sensitive feature for structural damage detection using AR model coefficients", Adv. Struct. Eng., 18(10), 1551-1562. https://doi.org/10.1260/1369-4332.18.10.1551
  22. Kammer , D.C. (2005), "Sensor set expansion for modal vibration testing", Mech. Syst. Signal Pr., 19(4), 700-713. https://doi.org/10.1016/j.ymssp.2004.06.003
  23. Kopsaftopoulos, F.P. and Fassois, S.D. (2015), "A vibration model residual-based sequential probability ratio test framework for structural health monitoring", Struct. Health Monit., 14(4), 359-381. https://doi.org/10.1177/1475921715580499
  24. Kostic, B. and Gul, M. (2017), "Vibration-based damage detection of bridges under varying temperature effects using time-series analysis and artificial neural networks", J. Bridge Eng., 22(10), 04017065. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001085
  25. Kraemer, P. (2011), "Damage diagnosis approaches for structural health and condition monitoring of offshore wind energy plants", University of Siegen, Siegen, Germany.
  26. Krawczuk, M., Zak, A. and Ostachowicz, W. (2000), "Elastic beam finite element with a transverse elasto-plastic crack", Finite Elem. Anal. Des., 34(1), 61-73. https://doi.org/10.1016/S0168-874X(99)00027-X
  27. Lakshmi, K. and Rama Mohan Rao, A. (2014), "A robust damage-detection technique with environmental variability combining time-series models with principal components", Nondestruct.Test. Eval., 29(4), 357-376. https://doi.org/10.1080/10589759.2014.949709
  28. Lakshmi, K. and Rao, A. (2015), "Damage identification technique based on time series models for LANL and ASCE benchmark structures", Insight-Non-Destruct. Test. Condition Monit., 57(10), 580-588. https://doi.org/10.1784/insi.2015.57.10.580
  29. Lakshmi, K. and Rao, A.R.M. (2016), "Structural damage detection using ARMAX time series models and cepstral distances", Sadhana, 41(9), 1081-1097.
  30. Lu, Y. and Gao, F. (2005), "A novel time-domain auto-regressive model for structural damage diagnosis", J. Sound Vib., 283(3-5), 1031-1049. https://doi.org/10.1016/j.jsv.2004.06.030
  31. Mallardo, V. and Alibadi M.H. (2013), "Optimal sensor placement for structural damage and impact identification- A review", Struct. Durability Health Monit., 9(4), 287-323.
  32. Mosavi, A.A., Dickey, D., Seracino, R. et al. (2012), "Identifying damage locations under ambient vibrations utilizing vector autoregressive models and Mahalanobis distances", Mech. Syst. Signal Pr., 26, 254-267. https://doi.org/10.1016/j.ymssp.2011.06.009
  33. Nair, K.K., Kiremidjian, A.S. and Law, K.H. (2006), "Time series-based damage detection and localization algorithm with application to the ASCE benchmark structure", J. Sound Vib., 291(1-2), 349-368. https://doi.org/10.1016/j.jsv.2005.06.016
  34. Oppenheim, A.V. and R. W. Schafer (1975), "Digital Signal Processing", Prentice-Hall, Englewood Cliffs, New Jersey, 6, 125-136.
  35. Pandit, S.M. and Wu, S.M. (1983), "Time series and system analysis with applications", (Vol. 3). New York: Wiley.
  36. Pnevmatikos, N. (2010), "Damage detection of structures using discrete wavelet transform", Proceedings of the 5th World Conference on Structural Control and Monitoring.
  37. Pnevmatikos, N.G., Blachowski, B., Hatzigeorgiou, G.D. and Swiercz, A. (2016), "Wavelet analysis based damage localization in steel frames with bolted connections", Smart Struct. Syst., 18(6), 1189-1202. https://doi.org/10.12989/sss.2016.18.6.1189
  38. Rao A.R.M. and Anandakumar, G. (2008), "Optimal sensor placement techniques for system identification and health monitoring of civil structures", Smart Struct. Syst., 4(4), 465-492. https://doi.org/10.12989/sss.2008.4.4.465
  39. Rao, A.R.M. and Lakshmi, K. (2015), "Damage diagnostic technique combining POD with time-frequency analysis and dynamic quantum PSO", Meccanica, 50(6), 1551-1578. https://doi.org/10.1007/s11012-015-0106-3
  40. Rao, A.R.M., Lakshmi, K. and Krishna Kumar, S. (2015), "Detection of delamination in laminated composites with limited measurements combining PCA and dynamic QPSO", Adv. Eng. Softw., 86, 85-106. https://doi.org/10.1016/j.advengsoft.2015.04.005
  41. Rosales, M.J. and Liyanapathirana, R. (2017), "Data driven innovations in structural health monitoring", J. Phys.: Conference Series, 842(1), 012012, IOP Publishing. https://doi.org/10.1088/1742-6596/842/1/012012
  42. Sakaris, C.S., Sakellariou, J.S. and Fassois, S.D. (2015), "A Generalized Functional Model Based Method for Vibration- Based Damage Precise Localization in 3D Structures", J. Physics: Conference Series, 628(1), 012008, IOP Publishing. https://doi.org/10.1088/1742-6596/628/1/012008
  43. Sakaris, C.S., Sakellariou, J.S. and Fassois, S.D. (2017), "Random-vibration-based damage detection and precise localization on a lab-scale aircraft stabilizer structure via the generalized functional model based method", Struct. Health Monit., 16(5), 594-610. https://doi.org/10.1177/1475921717707903
  44. Shen, S.S.P., Shu, T., Huang, N.E. et al. (2005), "HHT analysis of the nonlinear and non-stationary annual cycle of daily surface air temperature data", In Hilbert-Huang Transform and Its Applications, 187-209, Interdisciplinary Mathematical Sciences.
  45. Sohn, H. and Farrar, C.R. (2001), "Damage diagnosis using time series analysis of vibration signals", Smart Mater. Struct., 10(3), 446-451. https://doi.org/10.1088/0964-1726/10/3/304
  46. Tanner, N.A., Wait, J.R., Farrar, C.R. et al. (2003), "Structural health monitoring using modular wireless sensors", J. Intel. Mat. Syst. Str., 14(1), 43-56. https://doi.org/10.1177/1045389X03014001005
  47. Ugalde, U., Anduaga, J., Martinez, F. et al. (2015), "Novel SHM method to locate damages in substructures based on VARX models", J. Phys.: Conference Series, 628(1), 012013, IOP Publishing. https://doi.org/10.1088/1742-6596/628/1/012013
  48. Xie, L. and Mita, A. (2017), "An innovative substructure damage identification approach for shear structures based on ARMAX models", Procedia Eng., 188, 119-124. https://doi.org/10.1016/j.proeng.2017.04.464
  49. Zhang, Q.W. (2007), "Statistical damage identification for bridges using ambient vibration data", Comput. Struct., 85(7-8), 476-485. https://doi.org/10.1016/j.compstruc.2006.08.071