DOI QR코드

DOI QR Code

The effect of composite-elastomer isolation system on the seismic response of liquid-storage tanks: Part I

  • Shahrjerdi, A. (Department of Mechanical Engineering, Malayer University) ;
  • Bayat, M. (Department of Civil Engineering, Aalborg University)
  • 투고 : 2018.02.03
  • 심사 : 2018.09.11
  • 발행 : 2018.11.25

초록

A typical viable technique to decrease the seismic response of liquid storage tanks is to isolate them at the base. Base-isolation systems are an efficient and feasible solution to reduce the vulnerability of structures in high seismic risk zones. Nevertheless, when liquid storage tanks are under long-period shaking, the base-isolation systems could have different impacts. These kinds of earthquakes can damage the tanks readily. Hence, the seismic behaviour and vibration of cylindrical liquid storage tanks, subjected to earthquakes, is of paramount importance, and it is investigated in this paper. The Finite Element Method is used to evaluate seismic response in addition to the reduction of excessive liquid sloshing in the tank when subjected to the long-period ground motion. The non-linear stress-strain behaviour pertaining to polymers and rubbers is implemented while non-linear contact elements are employed to describe the 3-D surface-to-surface contact. Therefore, Nonlinear Procedures are used to investigate the fluid-structure interactions (FSI) between liquid and the tank wall while there is incompressible liquid. Part I, examines the effect of the flexibility of the isolation system and the tank aspect ratio (height to radius) on the tank wall radial displacements of the tank wall and the liquid sloshing heights. Maximum stress and base shear force for various aspect ratios and different base-isolators, which are subjected to three seismic conditions, will be discussed in Part II. It is shown that the composite-base isolator is much more effective than other isolators due to its high flexibility and strength combined. Moreover, the base isolators may decrease the maximum level pertaining to radial displacement.

키워드

과제정보

연구 과제 주관 기관 : Malayer University of Iran

참고문헌

  1. Abali, E. and Uckan, E. (2010), "Parametric analysis of liquid storage tanks base isolated by curved surface sliding bearings", Soil Dyn. Earthq. Eng., 30(1), 21-31. https://doi.org/10.1016/j.soildyn.2009.08.001
  2. ABAQUS, ABAQUS Inc..
  3. Akyildiz, H., U nal, N.E. and Aksoy, H. (2013), "An experimental investigation of the effects of the ring baffles on liquid sloshing in a rigid cylindrical tank", Ocean Eng., 59, 190-197.
  4. Andrade, L. and Tuxworth, J. (2009), "Seismic protection of structures with modern base isolation technologies", Paper 7a-3, Concrete Solutions.
  5. Bagheri, S., Rofooei, F. and Bozorgnia, Y. (2005), "Evaluation of the seismic response of liquid storage tanks", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing.
  6. Carta, G., Movchan, A.B., Argani, L.P. and Bursi, O.S. (2016), "Quasi-periodicity and multi-scale resonators for the reduction of seismic vibrations in fluid-solid systems", Int. J. Eng. Sci., 109, 216-239. https://doi.org/10.1016/j.ijengsci.2016.09.010
  7. Chen, X., Li, J., Li, Y. and Gu, X. (2016), "Lyapunov-based semiactive control of adaptive base isolation system employing Magnetorheological Elastomer base isolators", Earthq. Struct., 11(6), 1077-1099. https://doi.org/10.12989/eas.2016.11.6.1077
  8. Cho, J. and Lee, H. (2004), "Numerical study on liquid sloshing in baffled tank by nonlinear finite element method", Comput. Meth. Appl. Mech. Eng., 193(23), 2581-2598. https://doi.org/10.1016/j.cma.2004.01.009
  9. Cho, K.H., Kim, M.K., Lim, Y.M. and Cho, S.Y. (2004), "Seismic response of base-isolated liquid storage tanks considering fluidstructure-soil interaction in time domain", Soil Dyn. Earthq. Eng., 24(11), 839-852. https://doi.org/10.1016/j.soildyn.2004.05.003
  10. Das, A., Dutta, A. and Deb, S. (2012), "Modeling of fiberreinforced elastomeric base isolators", 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  11. Golzar, F., Shabani, R., Tariverdilo, S. and Rezazadeh, G. (2012), "Sloshing response of floating roofed liquid storage tanks subjected to earthquakes of different types", J. Press. Ves. Technol., 134(5), 051801. https://doi.org/10.1115/1.4006858
  12. Goudarzi, M.A. (2015), "Seismic design of a double deck floating roof type used for liquid storage tanks", J. Press. Ves. Technol., 137(4), 041302. https://doi.org/10.1115/1.4029111
  13. Goudarzi, M.A. and Sabbagh-Yazdi, S.R. (2012), "Investigation of nonlinear sloshing effects in seismically excited tanks", Soil Dyn. Earthq. Eng., 43, 355-365. https://doi.org/10.1016/j.soildyn.2012.08.001
  14. Hall, J.F., Holmes, W. and Somers, P. (1994), "Northridge earthquake, January 17, 1994", Preliminary Reconnaissance Report.
  15. Hanson, R.D. (1973), "Behavior of liquid-storage tanks, the Great Alaska Earthquake of 1964", Proceedings of the National Academy of Science, Washington, 7, 331-339.
  16. Housner, G.W. (1963), "The dynamic behavior of water tanks", Bull. Seismol. Soc. Am., 53(2), 381-387.
  17. Ibrahim, R.A. (2005), Liquid Sloshing Dynamics: Theory and Applications, Cambridge University Press.
  18. Jangid, R. and Datta, T. (1995), "Seismic behavior of base-isolated buildings-a state-of-the-art review".
  19. Jennings, P. and Housner, G. (1973), "The San Fernando, California, earthquake of February 9, 1971", Proceedings of the Fifth.
  20. KAmrAvA, A. (2015), "Seismic isolators and their types", Curr. World Environ., 10, 27-32. https://doi.org/10.12944/CWE.10.Special-Issue1.05
  21. Kawamura, S., Sugisaki, R., Ogura, K., Maezawa, S., Tanaka, S. and Yajima, A. (2000), "Seismic isolation retrofit in Japan", 12th World Conference on Earthquake Engineering.
  22. Kelly, J. and Takhirov, S. (2002), "Analytical and experimental study of fiber-reinforced strip isolators. PEER Report 2002/11, Pacific Earthquake Engineering Research Center", University of California, Berkeley.
  23. Kelly, J.M. (1986), "Aseismic base isolation: review and bibliography", Soil Dyn. Earthq. Eng., 5(4), 202-216. https://doi.org/10.1016/0267-7261(86)90006-0
  24. Kelly, J.M. and Takhirov, S.M. (2001), "Analytical and experimental study of fiber-reinforced elastometric isolators", Pacific Earthquake Engineering Research Center.
  25. Kim, M.K., Lim, Y.M., Cho, S.Y., Cho, K.H. and Lee, K.W. (2002), "Seismic analysis of base-isolated liquid storage tanks using the BE-FE-BE coupling technique", Soil Dyn. Earthq. Eng., 22(9), 1151-1158. https://doi.org/10.1016/S0267-7261(02)00142-2
  26. Kim, N.S. and Lee, D.G. (1995), "Pseudodynamic test for evaluation of seismic performance of base-isolated liquid storage tanks", Eng. Struct., 17(3), 198-208. https://doi.org/10.1016/0141-0296(95)00076-J
  27. Losanno, D., Spizzuoco, M. and Serino, G. (2014), "Optimal design of the seismic protection system for isolated bridges", Earthq. Struct., 6, 969-999.
  28. Luo, H., Zhang, R. and Weng, D. (2016), "Mitigation of liquid sloshing in storage tanks by using a hybrid control method", Soil Dyn. Earthq. Eng., 90, 183-195. https://doi.org/10.1016/j.soildyn.2016.08.037
  29. Maleki, A. and Ziyaeifar, M. (2007), "Damping enhancement of seismic isolated cylindrical liquid storage tanks using baffles", Eng. Struct., 29(12), 3227-3240. https://doi.org/10.1016/j.engstruct.2007.09.008
  30. Malhotra, P.K. (1997), "New method for seismic isolation of liquid-storage tanks", Earthq. Eng. Struct. Dyn., 26(8), 839-847. https://doi.org/10.1002/(SICI)1096-9845(199708)26:8<839::AID-EQE679>3.0.CO;2-Y
  31. Manos, G. and Talaslidis, D. (1988), "Response of cylindrical tanks subjected to lateral loads-correlation between analytical and experimental results", Proceedings of the 9th World Conference on Earthquake Engineering.
  32. Manos, G.C. (1986), "Earthquake tank-wall stability of unanchored tanks", J. Struct. Eng., 112(8), 1863-1880. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:8(1863)
  33. Manos, G.C. and Clough, R.W. (1985), "Tank damage during the May 1983 Coalinga earthquake", Earthq. Eng. Struct. Dyn., 13(4), 449-466. https://doi.org/10.1002/eqe.4290130403
  34. Matsui, T. (2005), "Sloshing in a cylindrical liquid storage tank with floating roof under earthquake excitation: Analytical solution", Tran. Arch. Inst. JPN, J. Struct. Constr. Eng., 594, 167-173.
  35. Matsui, T. (2007), "Sloshing in a cylindrical liquid storage tank with a floating roof under seismic excitation", J. Press. Ves. Technol., 129(4), 557-566. https://doi.org/10.1115/1.2767333
  36. Moon, B.Y., Kang, G.J., Kang, B.S. and Kelly, J.M. (2002), "Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation", J. Mater. Proc. Technol., 130, 145-150.
  37. Niwa, A. and Clough, R.W. (1982), "Buckling of cylindrical liquid-storage tanks under earthquake loading", Earthq. Eng. Struct. Dyn., 10(1), 107-122. https://doi.org/10.1002/eqe.4290100108
  38. Ogden, R. (1972), "Large deformation isotropic elasticity-on the correlation of theory and experiment for incompressible rubberlike solids", Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, The Royal Society.
  39. Senda, K. (1954), "On the vibration of an elevated water-tank-I", Tech. Rep. Osaka Univ., 4, 247-264.
  40. Shekari, M., Khaji, N. and Ahmadi, M. (2009), "A coupled BE-FE study for evaluation of seismically isolated cylindrical liquid storage tanks considering fluid-structure interaction", J. Fluid. Struct., 25(3), 567-585. https://doi.org/10.1016/j.jfluidstructs.2008.07.005
  41. Shekari, M., Khaji, N. and Ahmadi, M. (2010), "On the seismic behavior of cylindrical base-isolated liquid storage tanks excited by long-period ground motions", Soil Dyn. Earthq. Eng., 30(10), 968-980. https://doi.org/10.1016/j.soildyn.2010.04.008
  42. Shrimali, M. and Jangid, R. (2002), "Seismic response of liquid storage tanks isolated by sliding bearings", Eng. Struct., 24(7), 909-921. https://doi.org/10.1016/S0141-0296(02)00009-3
  43. Soleimanloo, H.S. and Barkhordari, M.A. (2013), "Effect of shape factor and rubber stiffness of fiber-reinforced elastomeric bearings on the vertical stiffness of isolators", Trend. Appl. Sci. Res., 8(1), 14. https://doi.org/10.3923/tasr.2013.14.25
  44. Standard, A.P.I.A.P.I. (1988), Welded Steel Tanks for Oil Storage.
  45. Standard, A.S.T.M. (2008), Standard Specification for Carbon Structural Steel, A36/A36 M.
  46. Steinbrugge, K.V. and Flores, R. (1963), "The Chilean earthquakes of May, 1960: A structural engineering viewpoint", Bull. Seismol. Soc. Am., 53(2), 225-307.
  47. Tsai, H.C. and Kelly, J.M. (2002), "Stiffness analysis of fiberreinforced rectangular seismic isolators", J. Eng. Mech., 128(4), 462-470. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:4(462)
  48. Veletsos, A. (1974), "Seismic effects in flexible liquid storage tanks", Proceedings of the 5th World Conference on Earthquake Engineering.
  49. Veletsos, A.S. and Auyang, J. (1977), "Earthquake response of liquid storage tanks", Adv. Civil Eng. Thr. Eng. Mech., ASCE, 1-24.
  50. Wang, Y.P., Teng, M.C. and Chung, K.W. (2001), "Seismic isolation of rigid cylindrical tanks using friction pendulum bearings", Earthq. Eng. Struct. Dyn., 30(7), 1083-1099. https://doi.org/10.1002/eqe.56
  51. Yan, J. and Yu, H.L. (2012),"The free sloshing modal analysis of liquid tank with baffles", Adv. Mater. Res., 347, 2404-2408.
  52. Yang, J.Y. (1976). Dynamic Behavior of Fluid Tank Systems, Rice University.
  53. Yen, K.Z. and Lee, Y.J. (2000), Passive Vibration Isolating System, Google Patents.
  54. Yu, Y.S., Ma, X.R. and Wang, B.L. (2007), "Multidimensional modal analysis of liquid nonlinear sloshing in right circular cylindrical tank", Appl. Math. Mech., 28(8), 1007-1018. https://doi.org/10.1007/s10483-007-0803-y
  55. Yu, Y., Royel, S., Li, J., Li, Y. and Ha, Q. (2016), "Magnetorheological elastomer base isolator for earthquake response mitigation on building structures: modeling and second-order sliding mode control", Earthq. Struct., 11(6), 943-966. https://doi.org/10.12989/eas.2016.11.6.943
  56. Zhang, H., Li, W., Yang, X., Lu, L., Wang, X., Sun, X. and Zhang, Y. (2007), "Development of polyurethane elastomer composite materials by addition of milled fiberglass with coupling agent", Mater. Lett., 61(6), 1358-1362. https://doi.org/10.1016/j.matlet.2006.07.031