Structural Engineering and Mechanics

  • 제68권4호
  • /
  • Pages.485-495
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural performance of GFRP-concrete composite beams

  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Xue, Yicong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhang, Tao (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Tian, Jing (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2018.05.24
  • 심사 : 2018.10.11
  • 발행 : 2018.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the results of an experimental study on the structural performance of an innovative GFRP-concrete composite beam construction, which is reinforced with longitudinal GFRP pultruded box-profile and transverse steel stirrups. GFRP perfobond (PBL) shear connectors are employed to enhance the bonding performance between the GFRP profile and the concrete portion. To investigate the shear and flexural performance of this composite system, eight specimens were designed and tested under three-point and four-point bending. The main variables were the height of the composite beam and the shear span-to-depth ratio. The test results indicated that bonding cracks did not occur at the interface between the GFRP profile and the concrete until the final stage of the test. This shows that the specimens performed well as composite beams during the test and that the GFRP PBL connectors were reliable. Based on the test results, two calculation methods were used to determine the flexural and shear capacity of the composite beams. A comparative study of the test and theoretical results suggests that the proposed methods can reasonably predict both the flexural and shear capacities of the specimens, whereas the provisions of ACI 440 are relatively conservative on both counts.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. ACI 440R (2006), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, American Concrete Institute, Michigan, U.S.A.
  2. Aydin, F. and Saribiyik, M. (2013), "Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete", Constr. Build. Mater., 41(2), 563-569. https://doi.org/10.1016/j.conbuildmat.2012.12.060
  3. Choi, K.K., Park, H.G. and Wight, J.K. (2007), "Unified shear strength model for reinforced concrete beams-part i: Development", ACI Struct. J., 104(2), 142-152.
  4. Choi, K.K. and Park, H.G. (2007), "Unified shear strength model for reinforced concrete beams-part ii: Verification and simplified method", ACI Struct. J., 104(2), 153-161.
  5. Fam, A. and Skutezky, T. (2006), "Composite T-beams using reduced-scale rectangular FRP tubes and concrete slabs", J. Compos. Constr., 10(2), 172-181. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:2(172)
  6. GB 50010 (2010), Code for Design of Concrete Structures, MoHURD, Beijing, China.
  7. GB/T228.1 (2010), Metallic Materials-Tensile Testing-Part 1: Method of Test at Room Temperature, AQSIQ, Beijing, China.
  8. GB/T 1447 (2005), Fiber-Reinforced Plastics Composites-Determination of Tensile Properties, AQSIQ, Beijing, China.
  9. Hadi, M.N.S. and Yuan, J.S. (2017), "Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars", Constr. Build. Mater., 144, 462-474. https://doi.org/10.1016/j.conbuildmat.2017.03.217
  10. Hassanzadeh, A.M. and Dehestani, M. (2017), "Numerical modeling of semi-confined composite beams consisting of GFRP and concrete", Struct. Eng. Mech., 62(1), 79-84. https://doi.org/10.12989/sem.2017.62.1.079
  11. Huang, L., Zhang, C., Yan, L. and Kasal, B. (2017), "Flexural behavior of U-shape FRP profile-RC composite beams with inner GFRP tube confinement at concrete compression zone", Compos. Struct., 184, 674-687.
  12. JTG D60 (2015), General Code for Design of Highway Bridges and Culverts, MoT, Beijing, China.
  13. Koaik, A., Bel, S. and Jurkiewiez, B. (2017), "Experimental tests and analytical model of concrete-GFRP hybrid beams under flexure", Compos. Struct., 180, 192-210. https://doi.org/10.1016/j.compstruct.2017.07.059
  14. Muttashar, M., Manalo, A., Karunasena, W. and Lokuge, W. (2017), "Flexural behaviour of multi-celled GFRP composite beams with concrete infill: Experiment and theoretical analysis", Compos. Struct., 159, 21-33. https://doi.org/10.1016/j.compstruct.2016.09.049
  15. Neagoe, C.A., Gil, L. and Perez, M.A. (2015), "Experimental study of GFRP-concrete hybrid beams with low degree of shear connection", Constr. Build. Mater., 101, 141-151. https://doi.org/10.1016/j.conbuildmat.2015.10.024
  16. Placas, A., Regan, P.E. and Baker, A.L. (1971), "Shear failure of reinforced concrete beams", ACI, 68(10), 763-773.
  17. Thomas, J. and Ramadassa, S. (2015), "Design for shear strength of concrete beams longitudinally reinforced with GFRP bars", Struct. Eng. Mech., 53(1), 41-55. https://doi.org/10.12989/sem.2015.53.1.041
  18. Unsal, I., Tokgoz, S., Cagatay, I.H. and Dundar, C. (2017), "A study on load-deflection behavior of two-span continuous concrete beams reinforced with GFRP and steel bars", Struct. Eng. Mech., 63(5), 629-637. https://doi.org/10.12989/SEM.2017.63.5.629
  19. Wight, J.K. (2011), Reinforced Concrete: Mechanics and Design, Pearson Publishing Ltd, New Jersey, U.S.A.
  20. Xin, H., Liu, Y., He, J., Fan, H. and Zhang, Y. (2015), "Fatigue behavior of hybrid GFRP-concrete bridge decks under sagging moment", Steel Compos. Struct., 18(4), 925-946. https://doi.org/10.12989/SCS.2015.18.4.925
  21. Yang, Y., Xue, Y., Yu, Y., Liu, R. and Ke, S. (2017), "Study of the design and mechanical performance of a GFRP-concrete composite deck", Steel Compos. Struct., 24(6), 679-688. https://doi.org/10.12989/SCS.2017.24.6.679
  22. Zuo, Y., Liu, Y. and He, J. (2018), "Experimental investigation on hybrid GFRP-concrete decks with T-shaped perforated ribs subjected to negative moment", Constr. Build. Mater., 158, 728-741.

피인용 문헌

  1. Structural behavior of sandwich composite wall with truss connectors under compression vol.35, pp.2, 2018, https://doi.org/10.12989/scs.2020.35.2.159
  2. Experimental and analytical study on continuous GFRP-concrete decks with steel bars vol.76, pp.6, 2018, https://doi.org/10.12989/sem.2020.76.6.737
  3. Flexible Fiber Fabric for FRP-Concrete Connection of Thin Hybrid Slabs vol.13, pp.17, 2018, https://doi.org/10.3390/polym13172862