Structural Engineering and Mechanics

  • 제68권4호
  • /
  • Pages.443-457
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Scattering of torsional surface waves in a three layered model structure

  • Gupta, Shishir (Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines)) ;
  • Pati, Prasenjit (Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines)) ;
  • Mandi, Anand (Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines)) ;
  • Kundu, Santimoy (Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines))
  • 투고 : 2018.01.17
  • 심사 : 2018.10.03
  • 발행 : 2018.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this article, a comparative study has been made to investigate the scattering behaviour of three layered structure model on torsional surface wave. For such model intermediate layer is taken as fiber reinforced composite, resting over a dry sandy Gibson substratum and underlying by different anelastic media. We consider two distinct mediums for topmost layer. In the first case, topmost layer has been taken as fluid saturated homogeneous porous layer, while in the second case the fluid saturated porous layer has been replaced by a transversely isotropic layer. Simple form expression for the secular equation of torsional surface wave has been worked out in both the cases by executing specific boundary conditions, which comprises Whittaker's function and its derivative, for imminent result that have been elaborated asymptotically. Some special cases have been constituted which are in excellent compliance with recorded literatures. For the sake of comparative study, numerical estimation and graphical illustration have been accomplished to identify the effects of the width ratio of the layers, Biot's gravity parameter, sandy parameter, porosity parameter and other heterogeneity parameters corresponding to the layers and half spaces, horizontal compressive and tensile initial stress on the phase velocity of torsional surface wave.

키워드

참고문헌

  1. Abo-El-Nour, N. and Alsheikh, F.A. (2009), "Reflection and refraction of plane quasi-longitudinal waves at an interface of two piezoelectric media under initial stresses", Arch. Appl. Mech., 79(9), 843-857. https://doi.org/10.1007/s00419-008-0257-y
  2. Abo-El-Nour, N. and Abo-Dahab, S.M. (2008), "The influence of the viscosity and the magnetic field on reflection and transmission of waves at interface between magnetoviscoelastic materials", Meccan., 43(4), 437-448. https://doi.org/10.1007/s11012-007-9107-1
  3. Ben-Hador, R. and Buchen, P. (1999), "Love and Rayleigh waves in non-uniform media", Geophys. J. Int., 137(2), 521-534. https://doi.org/10.1046/j.1365-246X.1999.00790.x
  4. Bhattacharya, R.C. (1975), "On the torsional wave propagation in a two-layered circular cylinder with imperfect bonding", Proc. Ind. Natn. Sci. Acad., 41(6), 613-619.
  5. Biot, M.A. (1962), "Mechanics of deformation and acoustic propagation in porous media", J. Appl. Phys., 33(4), 1482-1489. https://doi.org/10.1063/1.1728759
  6. Biot, M.A. (1966), Mechanics of Incremental Deformation, Wiley, New York, U.S.A.
  7. Bromwich, T.J. (1898), "On the influence of gravity on elastic waves, and, in particular, on the vibrations of an elastic globe", Proc. Lond. Math. Soc., 30, 98-120.
  8. Carcione, J.M., Kosloff, D. and Kosloff, R. (1988), "Wavepropagation simulation in an elastic anisotropic (transversely isotropic) solid", Quarter. J. Mech. Appl. Math., 41, 319-346. https://doi.org/10.1093/qjmam/41.3.319
  9. Chattaraj, R., Samal, S.K. and Mahanti, N.C. (2011), "Propagation of torsional surface wave in anisotropic poroelastic medium under initial stress", Wave Mot., 48, 184-195. https://doi.org/10.1016/j.wavemoti.2010.10.003
  10. Chattopadhyay, A., Gupta, S., Samal, S.K. and Sharma, V.K. (2009), "Torsional wave in self-reinforced medium", Int. J. Geomech., 9, 9-13. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:1(9)
  11. Chaudhary, S., Kaushik, V.P. and Tomar, S.K. (2005), "Transmission of shear waves through a self-reinforced layer sandwiched between two inhomogeneous viscoelastic halfspaces", Int. J. Mech. Sci., 47(9), 1455-1472. https://doi.org/10.1016/j.ijmecsci.2005.04.011
  12. Ding, H., Chen, W. and Zhang, L. (2006), Elasticity of Transversely Isotropic Materials, Springer Press, the Netherlands.
  13. Gubbins, D. (1990), Seismology and Plate Tectonics, Cambridge University Press, Cambridge.
  14. Gupta, S., Kundu, S., Pati, P. and Ahmed, M. (2018), "Torsional waves in fluid saturated porous layer clamped between two anisotropic media", Geomech. Eng., 15(1), 645-657. https://doi.org/10.12989/GAE.2018.15.1.645
  15. Islam, Z.M., Jia, P. and Lim, C.W. (2014), "Torsional wave propagation and vibration of circular nanostructures based on nonlocal elasticity theory", Int. J. Appl. Mech., 6(2) 1450011, 1-17.
  16. Kakar, R. (2015), "Torsional wave in an inhomogeneous prestressed elastic layer overlying an inhomogeneous elastic half-space under the effect of rigid boundary", Earthq. Struct., 9(4), 753-766. https://doi.org/10.12989/eas.2015.9.4.753
  17. Kakar, R. and Kakar, S. (2016), "Dispersion of shear wave in a pre-stressed hetrogeneous orthotropic layer over a pre-stressed anisotropic porous half-space with self-weight", Struct. Eng. Mech., 59(6), 951-972. https://doi.org/10.12989/sem.2016.59.6.951
  18. Kumar, S., Vishwakarma, S.K. and Gupta, S. (2013), "Existence of torsional surface waves in an earth's crustal layer lying over a sandy mantle", J. Earth Syst. Sci., 122, 1411-1421. https://doi.org/10.1007/s12040-013-0340-9
  19. Kumari, P., Modi, C. and Sharma, V. K. (2016), "Torsional waves in a magneto-viscoelastic layer over an inhomogeneous substratum", Eur. Phys. J. Plus, 131(8), 263. https://doi.org/10.1140/epjp/i2016-16263-7
  20. Kundu, S., Alam, P. and Gupta, S. (2017), "Shear waves in magneto-elastic transversely isotropic (MTI) layer bonded between two heterogeneous elastic media", Mech. Adv. Mater. Struct., 1-9.
  21. Lata, P., Kumar, R. and Sharma, N. (2016), "Plane waves in an anisotropic thermoelastic", Steel Compos. Struct., 22, 567-587. https://doi.org/10.12989/scs.2016.22.3.567
  22. Manna, S., Kundu, S. and Gupta, S. (2015), "Effect of reinforcement and inhomogeneity on the propagation of Love waves", Int. J. Geomech., 16(2), 04015045. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000517
  23. Markham, M.F. (1969), "Measurements of Elastic constants of fibre composites by ultrasonics", Compos., 1(2), 145-149. https://doi.org/10.1016/0010-4361(69)90059-7
  24. Meissner, E. (1921), "Elastische oberflachenwellen mit dispersion in einem inhomogenen medium", Vierteljahresschrift der Naturforschenden Gesellschaft in Zurich, 66, 181-195.
  25. Ozturk, A. and Akbarov, S.D. (2009), "Torsional wave propagation in a pre-stressed circular cylinder embedded in a prestressed elastic medium", Appl. Math. Modell., 33(9), 3636-3649. https://doi.org/10.1016/j.apm.2008.12.003
  26. Prosser, W.H. and Green Jr, R.E. (1990), "Characterization of the nonlinear elastic properties of graphite/epoxy composites using ultrasound", J. Reinf. Plast. Compos., 9, 162-173. https://doi.org/10.1177/073168449000900206
  27. Sahu, S.A., Singh, M.K. and Pankaj, K.K. (2018), "Analysis of torsional waves in a prestressed composite structure with loosely bonded and corrugated boundaries", Mech. Compos. Mater., 54(3), 321-332.
  28. Selim, M.M. (2010), "Torsional vibration of carbon nanotubes under initial compression stress", Brazil. J. Phys., 40(3), 283-287. https://doi.org/10.1590/S0103-97332010000300004
  29. Sharma, V. and Kumar, S. (2016), "Influence of microstructure, heterogeneity and internal friction on SH waves propagation in a viscoelastic layer overlying a couple stress substrate", Struct. Eng. Mech., 57(4), 703-716. https://doi.org/10.12989/sem.2016.57.4.703
  30. Singh, A.K., Chaki, M.S., Hazra, B. and Mahto, S. (2017), "Influence of imperfectly bonded piezoelectric layer with irregularity on propagation of love-type wave in a reinforced composite structure", Struct. Eng. Mech., 62(3), 325-344. https://doi.org/10.12989/sem.2017.62.3.325
  31. Shekhar, S. and Parvez, I.A. (2016), "Propagation of torsional surface waves in a double porous layer lying over a Gibson half space", Soil Dyn. Earthq. Eng., 80, 56-64. https://doi.org/10.1016/j.soildyn.2015.09.017
  32. Son, M.S. and Kang, Y.J. (2012), "Propagation of shear waves in a poroelastic layer constrained between two elastic layers", Appl. Math. Model., 36, 3685-3695. https://doi.org/10.1016/j.apm.2011.11.008
  33. Spencer, A.J.M. (1972), Deformations of Fiber-Reinforced Materials, Oxford University Press, London, U.K.
  34. Vinh, P.C., Aoudia, A. and Giang, P.T.H. (2016), "Rayleigh waves in orthotropic fluid-saturated porous media", Wave Mot., 61, 73-82. https://doi.org/10.1016/j.wavemoti.2015.10.007
  35. Wang, Y.S. and Zhang, Z.M. (1998), "Propagation of Love waves in a transversely isotropic fluid saturated porous layered halfspace", J. Acoust. Soc. Am., 103(2), 695-701. https://doi.org/10.1121/1.421196
  36. Watanabe, K. (2014), "Reflection of an impulsive torsional wave by a moving boundary", Wave Mot., 51, 1209-1224. https://doi.org/10.1016/j.wavemoti.2014.07.004
  37. Whittaker, E.T. and Watson, G.N. (1991), A Course of Modern Analysis, Cambridge University Press, Cambridge, U.K.