Steel and Composite Structures

  • 제29권3호
  • /
  • Pages.405-422
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanical properties of nanocomposite

  • Mohammadimehr, M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Mohammadi-Dehabadi, A.A. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Akhavan Alavi, S.M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Alambeigi, K. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Bamdad, M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Yazdani, R. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Hanifehlou, S. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • 투고 : 2017.11.12
  • 심사 : 2018.10.24
  • 발행 : 2018.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, experimental tensile test and manufacturing of carbon nanotube reinforced composite beam (CNTRC) is presented. Also, bending, buckling, and vibration analysis of CNTRC based on various beam theories such as Euler-Bernoulli, Timoshenko and Reddy beams are considered. At first, the experimental tensile tests are carried out for CNTRC and composite beams in order to obtain mechanical properties and then using Hamilton's principle the governing equations of motion are derived for Euler Bernoulli, Timoshenko and Reddy theories. The results have a good agreement with the obtained results by similar researches and it is shown that adding just two percent of carbon nanotubes increases dimensionless fundamental frequency and critical buckling load as well as decreases transverse deflection of composite beams. Also, the influences of different manufacturing processes such as hand layup and industrial methods using vacuum pump on composite properties are investigated. In these composite beams, glass fibers used in an epoxy matrix and for producing CNTRC, CNTs are applied as reinforcement particles. Applying two percent of CNTs leads to increase the mechanical properties and increases natural frequencies and critical buckling load and decreases deflection. The obtained natural frequencies and critical buckling load by theoretical method are higher than other methods, because there are some inevitable errors in industrial and hand layup method. Also, the minimum deflection occurs for theoretical methods, in bending analysis. In this study, Young's and shear modulli as well as density are obtained by experimental test and have not been used from the results of other researches. Then the theoretical analysis such as bending, buckling and vibration are considered by using the obtained mechanical properties of this research.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan, ARKA SANAT COMPOSITE Company

참고문헌

  1. An, X., Khoo, B.C. and Cui, Y. (2017), "Nonlinear aeroelastic analysis of curved laminated composite panels", Compos. Struct., 179, 377-414. https://doi.org/10.1016/j.compstruct.2017.07.042
  2. Ansari, R., Torabi, J. and Shojaei, M.F. (2017), "Buckling and vibration analysis of embedded functionally graded carbon nanotubereinforced composite annular sector plates under thermal loading", Compos. Part B: Eng., 109, 197-213. https://doi.org/10.1016/j.compositesb.2016.10.050
  3. Apuzzo, A., Barretta, R., Luciano, R., Marotti, D.E., Sciarra, F. and Penna, R. (2017), "Free vibrations of Bernoulli-Euler nanobeams by the stress-driven nonlocal integral model", Compos. Part B: Eng., 123, 105-111. https://doi.org/10.1016/j.compositesb.2017.03.057
  4. Arani, A.G., BabaAkbar-Zarei, H., Pourmousa, P. and Eskandari, M. (2017a), "Investigation of free vibration response of smart sandwich micro-beam on Winkler---Pasternak substrate exposed to multi physical fields", Microsyst. Technol., 24(7), 3045-3060. https://doi.org/10.1007/s00542-017-3681-5
  5. Arani, A.G., Jafari, G.S. and Kolahchi, R. (2017b), "Nonlinear vibration analysis of viscoelastic micro nano-composite sandwich plates integrated with sensor and actuator", Microsyst. Technol, 23, 1509-1535. https://doi.org/10.1007/s00542-016-3095-9
  6. Arefi, M. (2015), "Elastic solution of a curved beam made of functionally graded materials with different cross sections", Steel and Composite Structures., 18(3), 659-672. https://doi.org/10.12989/scs.2015.18.3.659
  7. Arefi, M. and Zenkour, A.M. (2016), "A simplified shear and normal deformations nonlocal theory for bending of functionally graded piezomagnetic sandwich nanobeams in magneto-thermo-electric environment", J. Sandw. Struct. Mater., 18(5), 624-651. https://doi.org/10.1177/1099636216652581
  8. Arefi, M. and Zenkour, A.M. (2017a), "Size-dependent vibration and bending analyses of the piezomagnetic three-layer nanobeams", Appl. Phys. A, 123(3), 202.
  9. Arefi, M. and Zenkour, A.M. (2017b), "Vibration and bending analysis of a sandwich microbeam with two integrated piezomagnetic face-sheets", Compos. Struct., 159, 479-490. https://doi.org/10.1016/j.compstruct.2016.09.088
  10. Arefi, M. and Zenkour, A.M. (2017c), "Transient analysis of a three-layer microbeam subjected to electric potential", Int. J. Smart Nano Mater., 8(1), 20-40. https://doi.org/10.1080/19475411.2017.1292967
  11. Arefi, M. and Zenkour, A.M. (2018), "Size-dependent electroelastic analysis of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory", J. Intel. Mater. Syst. Struct., 29(7), 1394-1406. https://doi.org/10.1177/1045389X17733333
  12. Bandaru, A.K., Patel, S., Sachan, Y., Ahmad, S. and Alagirusamy, R. (2016), "Mechanical behavior of Kevlar/basalt reinforced polypropylene composites", Compos. Part A, 90, 642-652. https://doi.org/10.1016/j.compositesa.2016.08.031
  13. Chen, D., Yang, J. and Kitipornchai, S. (2017), "Nonlinear vibration and postbuckling of functionally graded graphene reinforced porous nanocomposite beams", Compos. Sci. Technol., 142, 235-245. https://doi.org/10.1016/j.compscitech.2017.02.008
  14. Ebrahimi, F. and Barati, M.R. (2017), "Size-dependent vibration analysis of viscoelastic nanocrystalline silicon nanobeams with porosities based on a higher order refined beam theory", Compos. Struct., 166, 256-267. https://doi.org/10.1016/j.compstruct.2017.01.036
  15. Emam, S. and Eltaher, M.A. (2016), "Buckling and postbuckling of composite beams in hygrothermal environments", Compos. Struct., 152, 665-675. https://doi.org/10.1016/j.compstruct.2016.05.029
  16. Emam, S.A. and Nayfeh, A.H. (2013), "Non-linear response of buckled beams to 1: 1 and 3: 1 internal resonances", Non-Linear Mech., 52, 12-25. https://doi.org/10.1016/j.ijnonlinmec.2013.01.018
  17. Fereidoon, A., Eftekhari, D. and Yaghoobi, H. (2015), "Dynamic behavior of piezoelectric composite beams under moving loads", J. Compos. Mater., 50, 899-916.
  18. Filippi, M., Carrera, E. and Zenkour, A.M. (2015), "Static analyses of FGM beams by various theories and finite elements", Composites Part B: Engineering, 72, 1-9.
  19. Ganapathi, M. and Polit, O. (2017), "Dynamic characteristics of curved nanobeams using nonlocal higher-order curved beam theory", Physica E: Low-dimens. Syst. Nanostruct., 91, 190-202. https://doi.org/10.1016/j.physe.2017.04.012
  20. Gholami, R. and Ansari, R. (2017), "A unified nonlocal nonlinear higher-order shear deformable plate model for postbuckling analysis of piezoelectric-piezomagnetic rectangular nanoplates with various edge supports", Compos. Struct., 166, 202-218. https://doi.org/10.1016/j.compstruct.2017.01.045
  21. Gliszczynski, A. and Kubiak, T. (2017), "Load carrying capacity of thin-walled composite beams subjected to pure bending", Thin-Wall. Struct., 115, 76-85. https://doi.org/10.1016/j.tws.2017.02.009
  22. Goncalves, B.R., Karttunen, A., Romanoff, J. and Reddy, J.N. (2017), "Buckling and free vibration of shear-flexible sandwich beams using a couple-stress-based finite element", Compos. Struct., 165, 233-241. https://doi.org/10.1016/j.compstruct.2017.01.033
  23. Goswami, S. and Becker, W. (2015), "Analysis of sandwich plates with compressible core using layerwise refined plate theory and interface stress continuity", J. Compos. Mater., 50, 201-217.
  24. Hadi, M.N.S. and Yuan, J.S. (2017), "Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars", Constr. Build. Mater., 144, 462-474. https://doi.org/10.1016/j.conbuildmat.2017.03.217
  25. Jacob, G.C., Fellers, J.F., Simunovic, S. and Starbuck, J.M. (2002), "Energy Absorption in Polymer Composites for Automotive Crashworthiness", J. Compos. Mater., 36, 813-850. https://doi.org/10.1177/0021998302036007164
  26. Jin, G., Yang, C. and Liu, Z. (2016), "Vibration and damping analysis of sandwich viscoelastic-core beam using Reddy's higher-order", Compos. Struct., 140, 390-409. https://doi.org/10.1016/j.compstruct.2016.01.017
  27. Koochaki, G.R. (2011), "Free Vibration Analysis of Functionally Graded Beams", Int. J. Mech. Aerosp. Ind. Mechatro. Manuf. Eng., 5, 514-517.
  28. Lee, J.W. and Lee, J.Y. (2017), "Free vibration analysis of functionally graded Bernoulli-Euler beams using an exact transfer matrix expression", Int. J. Mech. Sci., 122, 1-17. https://doi.org/10.1016/j.ijmecsci.2017.01.011
  29. Li, S.R., Cao, F.D. and Wan, Z.Q. (2013), "Bending solutions of FGM Timoshenko beams from those of the homogenous Euler-Bernoulli beams", Appl. Math. Model., 37, 7077-7085. https://doi.org/10.1016/j.apm.2013.02.047
  30. Li, X., Li, L., Hu, Y., Ding, Z. and Deng, W. (2017), "Bending, buckling and vibration of axially functionally graded beams based on nonlocal strain gradient theory", Compos. Struct., 165, 250-265. https://doi.org/10.1016/j.compstruct.2017.01.032
  31. Mehrabian, A., Haldar, A. and Reyes-Salazar, A. (2005), "Seismic response analysis of steel frames with post-North ridge connection", Steel Compos. Struct., Int. J., 5(4), 271-287. https://doi.org/10.12989/scs.2005.5.4.271
  32. Mohammadimehr, M. and Mehrabi, M. (2017), "Stability and free vibration analysis of double-bonded micro composite sandwich cylindrical shells conveying fluid flow", Appl. Math. Model., 47, 685-709. https://doi.org/10.1016/j.apm.2017.03.054
  33. Mohammadimehr, M. and Mostafavifar, M. (2016), "Free vibration analysis of sandwich plate with a transversely flexible core and FG-CNTs reinforced nanocomposite face sheets subjected to magnetic field and temperature-dependent material properties using SGT", Compos. Part B: Eng., 94, 253-270. https://doi.org/10.1016/j.compositesb.2016.03.030
  34. Mohammadimehr, M. and Shahedi, S. (2016), "Nonlinear magneto-electro-mechanical vibration analysis of doublebonded sandwich Timoshenko microbeams based on MSGT using GDQM", Steel Compos. Struct., Int. J., 21(1), 1-36. https://doi.org/10.12989/scs.2016.21.1.001
  35. Mohammadimehr, M., Navi, B.R. and Arani, A.G. (2015), "Free vibration of viscoelastic double-bonded polymeric nanocomposite plates reinforced by FG-SWCNTs using MSGT, sinusoidal shear deformation theory and meshless method", Compos. Struct., 131, 654-671. https://doi.org/10.1016/j.compstruct.2015.05.077
  36. Mohammadimehr, M., Rostami, R. and Arefi, M. (2016), "Electroelastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-543. https://doi.org/10.12989/scs.2016.20.3.513
  37. Mohammadimehr, M., Akhavan Alavi, S.M., Okhravi, S.V. and Edjtahed, S.H. (2017), "Free vibration analysis of micromagneto-electro-elastic cylindrical sandwich panel considering functionally graded carbon nanotube-reinforced nanocomposite face sheets, various circuit boundary conditions, and temperature-dependent material properties using high-order sandwich panel theory and modified strain gradient theory", J. Int. Mater. Syst. Struct., 29(5), 863-882. https://doi.org/10.1177/1045389X17721048
  38. Mohammadimehr, M., Okhravi, S.V. and Akhavan Alavi, S.M. (2018), "Free vibration analysis of magneto-electro-elastic cylindrical composite panel reinforced by various distributions of CNTs with considering open and closed circuits boundary conditions based on FSDT", J. Vib. Control, 24(8), 1551-1569. https://doi.org/10.1177/1077546316664022
  39. Naderi, A.A., Rahimi, G.H. and Arefi, M. (2014), "Influence of fiber paths on buckling load of tailored conical shells", Steel Compos. Struct., Int. J., 16(4), 375-387. https://doi.org/10.12989/scs.2014.16.4.375
  40. Nayak, A.K., Moy, S.S.J. and Shenoi, R.A. (2002), "Free vibration analysis of composite sandwich plates based on Reddy's higherorder theory", Compos. Part B: Eng., 33, 505-519. https://doi.org/10.1016/S1359-8368(02)00035-5
  41. Nguyen, T.T., Thang, P.T. and Lee, J. (2017), "Lateral buckling analysis of thin-walled functionally graded open-section beams", Compos. Struct., 160, 952-963. https://doi.org/10.1016/j.compstruct.2016.10.017
  42. Orun, A.E. and Guler, M.A. (2017), "Effect of hole reinforcement on the buckling behaviour of thin-walled beams subjected to combined loading", Thin-Wall. Struct., 118, 12-22. https://doi.org/10.1016/j.tws.2017.04.034
  43. Pagani, A. and Carrera, E. (2017), "Large-deflection and postbuckling analyses of laminated composite beams by Carrera Unified Formulation", Compos. Struct., 170, 40-52. https://doi.org/10.1016/j.compstruct.2017.03.008
  44. Petrone, G. and Meruane, V. (2017), "Mechanical properties updating of a non-uniform natural fibre composite panel by means of a parallel genetic algorithm", Compos. Part A, 94, 226-233. https://doi.org/10.1016/j.compositesa.2016.12.017
  45. Piana, G., Lofrano, E., Manuello, A. and Ruta, G. (2017), "Natural frequencies and buckling of compressed non-symmetric thinwalled beams", Thin-Wall. Struct., 111, 189-196. https://doi.org/10.1016/j.tws.2016.11.021
  46. Scuciato, R.F., Carrer, J.A.M. and Mansur, W.J. (2017), "The timedependent boundary element method formulation applied to dynamic analysis of Euler-Bernoulli beams: the linear ${\theta}$ method", Eng. Anal. Bound. Elem., 79, 98-109. https://doi.org/10.1016/j.enganabound.2017.02.010
  47. Shaat, M., Khorshidi, M.A., Abdelkefi, A. and Shariati, M. (2016), "Modeling and vibration characteristics of cracked nano-beams made of nanocrystalline materials", Mech. Sci., 115, 574-585.
  48. Shao, D., Hu, S., Wang, Q. and Pang, F. (2017), "Free vibration of refined higher-order shear deformation composite laminated beams with general boundary conditions", Compos. Part B: Eng., 108, 75-90. https://doi.org/10.1016/j.compositesb.2016.09.093
  49. Sharma, K. and Shukla, M. (2014), "Three-phase carbon fiber amine functionalized carbon nanotubes epoxy composite: processing, characterisation, and multiscale modeling", Nanomater., p. 2. DOI: http://dx.doi.org/10.1155/2014/837492
  50. Vieira, R.F., Virtuoso, F.B.E. and Pereira, E.B.R. (2017), "Buckling of thin-walled structures through a higher order beam model", Comput. Struct., 180, 104-116. https://doi.org/10.1016/j.compstruc.2016.01.005
  51. Wattanasakulpong, N., Prusty, B.G., Kelly, D.W. and Hoffman, M. (2012), "Free vibration analysis of layered functionally graded beams with experimental validation", J. Mater. Des., 36, 182-190. https://doi.org/10.1016/j.matdes.2011.10.049
  52. Xu, X., Han, Q. and Chu, F. (2017), "Nonlinear vibration of a rotating cantilever beam in a surrounding magnetic field", Int. J. Non-Linear Mech., 95, 59-72. https://doi.org/10.1016/j.ijnonlinmec.2017.05.014
  53. Yang, L., Fan, T., Yang, L., Han, X. and Chen, Z. (2017), "Bending of functionally graded nanobeams incorporating surface effects based on Timoshenko beam model", Theor. Appl. Mech. Lett., 7(3), 152-158. https://doi.org/10.1016/j.taml.2017.03.001
  54. Zamani, H.A., Bodaghi, M., Aghdam, M.M. and Salehi, M. (2014), "Accurate damping analysis of viscoelastic composite beams and plates on suppressive foundation", J. Compos. Mater., 49, 2187-2202.
  55. Zhang, Z.J., Han, B., Zhang, Q.C. and Jin, F. (2017), "Free vibration analysis of sandwich beams with honeycombcorrugation hybrid cores", Compos. Struct., 171, 335-344. https://doi.org/10.1016/j.compstruct.2017.03.045
  56. Zhong, Y., Wu, G., Ren, H. and Jiang, Z. (2017), "Bending properties evaluation of newly designed reinforced bamboo scrimber composite beams", Constr. Build. Mater., 143, 61-70. https://doi.org/10.1016/j.conbuildmat.2017.03.052
  57. Zhu, X., Wang, Y. and Dai, H.H. (2017), "Buckling analysis of Euler-Bernoulli beams using Eringen's two-phase nonlocal model", Int. J. Eng. Sci., 116, 130-140. https://doi.org/10.1016/j.ijengsci.2017.03.008

피인용 문헌

  1. Effectiveness of piezoelectric fiber reinforced composite laminate in active damping for smart structures vol.31, pp.4, 2018, https://doi.org/10.12989/scs.2019.31.4.387
  2. Analysis of sandwich Timoshenko porous beam with temperature-dependent material properties: Magneto-electro-elastic vibration and buckling solution vol.25, pp.23, 2018, https://doi.org/10.1177/1077546319860314
  3. Optimal placement of piezoelectric actuator/senor patches pair in sandwich plate by improved genetic algorithm vol.26, pp.6, 2018, https://doi.org/10.12989/sss.2020.26.6.721
  4. Experimental Analysis of Mechanical Properties and Durability of Cement-Based Composite with Carbon Nanotube vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/8777613
  5. Free vibration of electro-magneto-thermo sandwich Timoshenko beam made of porous core and GPLRC vol.10, pp.2, 2018, https://doi.org/10.12989/anr.2021.10.2.115
  6. Computer modeling to forecast accurate of efficiency parameters of different size of graphene platelet, carbon, and boron nitride nanotubes: A molecular dynamics simulation vol.27, pp.2, 2018, https://doi.org/10.12989/cac.2021.27.2.111
  7. On static buckling of multilayered carbon nanotubes reinforced composite nanobeams supported on non-linear elastic foundations vol.40, pp.3, 2021, https://doi.org/10.12989/scs.2021.40.3.389
  8. New solution for damaged porous RC cantilever beams strengthening by composite plate vol.10, pp.3, 2018, https://doi.org/10.12989/amr.2021.10.3.169