Steel and Composite Structures

  • 제29권3호
  • /
  • Pages.379-389
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling analysis of elastically-restrained steel plates under eccentric compression

  • Qin, Ying (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, and National Prestress Engineering Research Center, School of Civil Engineering, Southeast University) ;
  • Shu, Gan-Ping (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, and National Prestress Engineering Research Center, School of Civil Engineering, Southeast University) ;
  • Du, Er-Feng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, and National Prestress Engineering Research Center, School of Civil Engineering, Southeast University) ;
  • Lu, Rui-Hua (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, and National Prestress Engineering Research Center, School of Civil Engineering, Southeast University)
  • 투고 : 2018.05.27
  • 심사 : 2018.10.23
  • 발행 : 2018.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, the explicit closed-form local buckling solution of steel plates in contact with concrete, with both loaded and unloaded edges elastically restrained against rotation and subjected to eccentric compression is presented. The Rayleigh-Rize approach is applied to establish the eigenvalue problem for the local buckling performance. Buckling shape which combines trigonometric and biquadratic functions is introduced according to that used by Qin et al. (2017) on steel plate buckling under uniform compression. Explicit solutions for predicting the local buckling stress of steel plate are obtained in terms of the rotational stiffness. Based on different boundary conditions, simply yet explicit local buckling solutions are discussed in details. The proposed formulas are validated against previous research and finite element results. The influences of the loading stress gradient parameter, the aspect ratio, and the rotational stiffness on the local buckling stress resultants of steel plates with different boundary conditions were evaluated. This work can be considered as an alternative to apply a different buckling shape function to study the buckling problem of steel plate under eccentric compression comparing to the work by Qin et al. (2018), and the results are found to be in consistent with those in Qin et al. (2018).

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of China, South China University of Technology, Central Universities

참고문헌

  1. Abbasi, M., Khezri, M., Rasmussen, K.J.R. and Schafer, B.W. (2018), "Elastic buckling analysis of cold-formed steel built-up sections with discrete fasteners using the compound strip method", Thin-Wall. Struct., 124, 58-71. https://doi.org/10.1016/j.tws.2017.11.046
  2. Burgos, C.A., Jaca, R.C. and Godoy, L.A. (2018), "Post-buckling behavior of fluid-storage steel horizontal tanks", Int. J. Press. Ves. Pip., 162, 46-51. https://doi.org/10.1016/j.ijpvp.2018.03.001
  3. De Holanda, A.S. and Goncalves, P.B. (2003), "Postbuckling Analysis of Plates Resting on a Tensionless Elastic Foundation", J. Eng. Mech., 129(4), 438-448. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:4(438)
  4. Dong, J.H., Ma, X., Zhuge, Y. and Mills, J.E. (2017), "Shear buckling analysis of laminated plates on tensionless elastic foundations", Steel Compos. Struct., Int. J., 24(6), 697-709.
  5. Dong, J.H., Ma, X., Zhuge, Y. and Mills, J.E. (2018), "Unilateral contact buckling behaviour of orthotropic plates subjected to combined in-plane shear and bending", Int. J. Solids Struct., 150, 135-153. https://doi.org/10.1016/j.ijsolstr.2018.06.011
  6. Fang, C., Yam, M.C.H., Lam, A.C.C. and Ke, K. (2017), "Reinforcing strategies for double-coped beams against local web buckling", Eng. Struct., 152, 736-749. https://doi.org/10.1016/j.engstruct.2017.09.049
  7. Gheidi, A., Mirtaheri, M., Zandi, A.P. and Alanjari, P. (2011), "Effect of filler material on local and global behaviour of buckling-restrained braces", Struct. Des. Tall Spec. Build., 20(6), 700-710. https://doi.org/10.1002/tal.555
  8. Klouche, F., Darcherif, L., Sekkal, M. and Tounsi, A. (2017), "An original single variable shear deformation theory for buckling analysis of thick isotropic plates", Struct. Eng. Mech., Int. J., 63(4), 439-446.
  9. Li, D., Smith, S. and Ma, X. (2016), "End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations", Int. J. Solids Struct., 105, 83-89.
  10. Liu, D.Y., Liu, H.B., Chen, Z.H. and Liao, X.W. (2017), "Structural behavior of extreme thick-walled cold-formed square steel tube", J. Constr. Steel Res., 128, 371-379. https://doi.org/10.1016/j.jcsr.2016.09.004
  11. Liu, Z.A., Liu, H.B., Chen, Z.H. and Zhang, G.P. (2018), "Structural behavior of cold-formed thick-walled rectangular steel columns", J. Constr. Steel Res., 147, 277-292. https://doi.org/10.1016/j.jcsr.2018.03.013
  12. Long, Y.L., Wan, J. and Cai, J. (2016), "Theoretical study on local buckling of rectangular CFT columns under eccentric compression", J. Constr. Steel Res., 120, 70-80. https://doi.org/10.1016/j.jcsr.2015.12.029
  13. Ma, X., Butterworth, J. and Clifton, C. (2008), "Initial compressive buckling of clamped plates resting on tensionless elastic or rigid foundations", J. Eng. Mech., 134(9), 514-518. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:6(514)
  14. Mirtaheri, M. and Zoghi, M.A. (2016), "Design guides to resist progressive collapse for steel structures", Steel Compos. Struct., Int. J., 20(2), 357-378. https://doi.org/10.12989/scs.2016.20.2.357
  15. Mirtaheri, M., Sehat, S. and Nazeryan, M. (2018), "Improving the behavior of buckling restrained braces through obtaining optimum steel core length", Struct. Eng. Mech., Int. J., 65(4), 401-408.
  16. Mo, S., Zhao, R. and Zhong, X. (2004), "Local buckling research on concrete filled square steel box member", J. Hunan U. Sci. Tech. (Natural Science Edition), 19, 43-47.
  17. Naghsh, A., Azhari, M. and Saadatpour, M.M. (2018), "Thermal buckling analysis of point-supported laminated composite plates in unilateral contact", Appl. Math. Model., 56, 564-583. https://doi.org/10.1016/j.apm.2017.12.020
  18. Patton, M.L. and Singh, K.D. (2017), "Buckling of fixed-ended concrete-filled steel columns under axial compression", Int. J. Steel Struct., 17(3), 1059-1071. https://doi.org/10.1007/s13296-017-9016-7
  19. Qiao, P., Chen, F., Xu, J. and Lu, Z. (2013), "Local buckling analysis of restrained orthotropic plates under generic in-plane loading", J. Eng. Struct., 139(8), 936-951.
  20. Qin, Y., Chen, Z.H., Bai, J.J. and Li, Z.L. (2016), "Test of extended thick-walled through-diaphragm connection to thickwalled CFT column", Steel Compos. Struct., Int. J., 20(1), 1-20. https://doi.org/10.12989/scs.2016.20.1.001
  21. Qin, Y., Lu, J.Y. and Cao, S. (2017), "Theoretical study on local buckling of steel plate in concrete-filled tube column under axial compression", ISIJ Int., 57(9), 1645-1651. https://doi.org/10.2355/isijinternational.ISIJINT-2016-755
  22. Qin, Y., Du, E.F., Li, Y.W. and Zhang, J.C. (2018), "Local buckling of steel plates in composite structures under combined bending and compression", ISIJ Int., 58(11). DOI: https://doi.org/10.2355/isijinternational.ISIJINT-2018-202
  23. Shen, H.S. and Li, Q.S. (2004), "Postbuckling of shear deformable laminated plates resting on a tensionless elastic foundation subjected to mechanical or thermal loading", Int. J. Solids Struct., 41(16-17), 4769-4785. https://doi.org/10.1016/j.ijsolstr.2004.02.015
  24. Thai, H.T., Kim, S.E. and Kim, J. (2017), "Improved refined plastic hinge analysis accounting for local buckling and lateraltorsional buckling", Steel Compos. Struct., Int. J., 24(3), 339-349.
  25. Uy, B. (2001), "Local and postlocal buckling of fabricated steel and composite cross sections", J. Struct. Eng., 127(6), 666-677. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(666)
  26. Uy, B. and Bradford, M.A. (1996), "Elastic local buckling of steel plates in composite steel-concrete members", Eng. Struct., 18(3), 193-200. https://doi.org/10.1016/0141-0296(95)00143-3
  27. Villarreal, E. and Abajo, D. (2018), "Buckling and modal analysis of rotationally restrained orthotropic plates", Progress Aerosp. Sci., 78, 116-130.
  28. Wright, H.D. (1993), "Buckling of steel plates in contact with a rigid medium", Struct. Engr., 71(12), 209-215.
  29. Yerudkar D.S. and Vesmawala, G.R. (2018), "Strength and buckling of cold-formed steel laterally unbraced stiffened C and Z sections", P. I. Civil Eng.-Str. B., 171(3), 216-225. https://doi.org/10.1680/jstbu.15.00112