DOI QR코드

DOI QR Code

Seismic retrofit of a framed structure using damped cable systems

  • Naeem, Asad (Department of Civil Engineering and Architectural Engineering, Sungkyunkwan University) ;
  • Kim, Jinkoo (Department of Civil Engineering and Architectural Engineering, Sungkyunkwan University)
  • 투고 : 2017.08.20
  • 심사 : 2018.09.28
  • 발행 : 2018.11.10

초록

The purpose of this study is to investigate the effectiveness of damped cable systems (DCS) to mitigate the earthquake-induced responses of a building frame structure. The seismic performance of the DCS is investigated using the fragility analysis and life cycle cost evaluation of an existing building retrofitted with the DCS, and the results are compared with the structure retrofitted with conventional fluid viscous dampers. The comparison of the analysis results reveals that, due to the self-centering capability of the DCS, residual displacement approximately reaches to zero for the structure retrofitted with the DCS. The fragility analysis shows that the structure retrofitted with the DCS has the least probability of reaching the specific limit states compared to the bare structure and the structure with the conventional fluid viscous damper (VD), especially under the severe ground motions. It is also observed that both the initial and the life cycle costs of the DCS seismic retrofitting technique is lesser compare to the structure retrofitted with the VD.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Land, Infrastructure and Transport of Korean government

참고문헌

  1. ASCE/SEI 7-16 (2016), American Society of Civil Engineers; Minimum Design Loads for Buildings and Other Structures, Reston, FL, USA.
  2. ASCE/SEI 41-13 (2013), American Society of Civil Engineers; Seismic Evaluation and Retrofit of Existing Buildings, Reston, FL, USA.
  3. Bedoya-Ruiz, D.A., Bermudez, C.A., A lvarez, D.A., Ortiz, G.A. and Escobar, J.V. (2012), "Cyclic behavior of prestressed precast concrete walls", Proceedings of 15th WCEE, Lisbon, Portugal.
  4. Celik, O.C. and Ellingwood, B.R. (2009), "Seismic risk assessment of gravity load designed reinforced concrete frames subjected to Mid-America ground motions", J. Struct. Eng., 135(4), 414-424. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(414)
  5. Chou, C.C., Tsai, W.J. and Chung, P.T. (2016), "Development and validation tests of a dual-core self-centering sandwiched buckling-restrained brace (SC-SBRB) for seismic resistance", J. Struct. Eng., 121, 30-41. https://doi.org/10.1016/j.engstruct.2016.04.015
  6. Christopoulos, C., Tremblay, R., Kim, H.J. and Lacerte, M. (2008), "Self-centering energy dissipative bracing system for the seismic resistance of structures development and validation", J. Struct. Eng., 134(1), 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96)
  7. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for the 2000 SAC Federal Emergency Management Agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526)
  8. Dolce, M. and Cardone, D. (2006), "Theoretical and experimental studies for the application of shape memory alloys in civil engineering", J. Eng. Mater. Technol., 128(3), 302-311. https://doi.org/10.1115/1.2203106
  9. Dyanati, M., Huang, Q. and Roke, D.A. (2014), "Structural and nonstructural performance evaluation of self-centering, concentrically braced frames under seismic loading", In: Structures Congress 2014, pp. 2393-2404.
  10. Eatherton, M.R., Ma, X., Krawinkler, H., Mar, D., Billington, S., Hajjar, J.F. and Deierlein, G.G. (2014), "Design concepts for controlled rocking of self-centering steel-braced frames", J. Struct. Eng., 140(11), 04014082. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001047
  11. FEMA P695 (2009), Quantification of Building Seismic Performance Factors; Federal Emergency Management Agency (FEMA), FEMA, USA.
  12. Ingalkar, R.S. (2014), "Rehabilitation of Buildings and Bridges by Using Shape Memory Alloys (SMA)", Int. J. Civil Eng. Res., 5(2), 163-168.
  13. Kim, J., Choi, H. and Min, K.W. (2003), "Performance-based design of added viscous dampers using capacity spectrum method", J. Earthq. Eng., 7(1), 1-24. https://doi.org/10.1080/13632460309350439
  14. Kim, J., Kim, M. and Nour Eldin, M. (2017), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Compos. Struct., Int. J., 25(4), 473-484
  15. Lee, J. and Kim, J. (2015), "Seismic performance evaluation of moment frames with slit-friction hybrid dampers", Earthq. Struct., Int. J., 9(6), 1291-1311. https://doi.org/10.12989/eas.2015.9.6.1291
  16. Lee, J., Kang, H. and Kim, J. (2017), "Seismic performance of steel plate slit-friction hybrid dampers", J. Constr. Steel Res., 136, 128-139. https://doi.org/10.1016/j.jcsr.2017.05.005
  17. Marshall, J.D. and Charney, F.A. (2012), "Seismic response of steel frame structures with hybrid passive control systems", Earthq. Eng. Struct. Dyn., 41(4), 715-733. https://doi.org/10.1002/eqe.1153
  18. Miller, D.J., Fahnestock, L.A. and Eatherton, M.R. (2012), "Development and experimental validation of a nickel-titanium shape memory alloy self-centering buckling-restrained brace", Eng. Struct., 40, 288-298. https://doi.org/10.1016/j.engstruct.2012.02.037
  19. Naeem, A. and Kim, J. (2018), "Seismic performance evaluation of a spring viscous damper cable system", Eng. Struct., 176, 455-467. https://doi.org/10.1016/j.engstruct.2018.09.055
  20. Naeem, A., Nour Eldin, M., Kim, J. and Kim, J. (2017), "Seismic performance evaluation of a structure retrofitted using steel slit dampers with shape memory alloy bars", Int. J. Steel Struct., 17(4), 1627-1638. https://doi.org/10.1007/s13296-017-1227-4
  21. Nour Eldin, M., Naeem, A. and Kim, J. (2018a), "Life-cycle cost evaluation of steel structures retrofitted with steel slit damper and shape memory alloy-based hybrid damper", Adv. Struct. Eng., 1369433218773487.
  22. Nour Eldin, M., Kim, J.G. and Kim, J. (2018b), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct., Int. J., 27(5), 633-646.
  23. PEER (2017), PEER NGA Database, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA. http://peer.berkeley.edu/nga
  24. Pekcan, G., Mander, J.B. and Chen, S.S. (2000), "Balancing lateral loads using tendon-based supplemental damping system", J. Struct. Eng., 126(8), 896-905. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(896)
  25. Rahman, M.A. and Sritharan, S. (2007), "Performance-based seismic evaluation of two five-story precast concrete hybrid frame buildings", J. Struct. Eng., 133(11), 1489-1500. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1489)
  26. Roke, D. and Jeffers, B. (2012), "Parametric study of selfcentering concentrically-braced frame systems with frictionbased energy dissipation", Proceeding of Behaviour of Steel Structures in Seismic Areas (STESSA), pp. 691-696.
  27. Sorace, S. and Terenzi, G. (2001), "Non-linear dynamic modelling and design procedure of FV spring-dampers for base isolation", Eng. Struct., 23(12), 1556-1567. https://doi.org/10.1016/S0141-0296(01)00063-3
  28. Sorace, S. and Terenzi, G. (2012a), "The damped cable system for seismic protection of frame structures. Part I: General concepts, testing, and modeling", Earthq. Eng. Struct. Dyn., 41(5), 915-928. https://doi.org/10.1002/eqe.1166
  29. Sorace, S. and Terenzi, G. (2012b), "The damped cable system for seismic protection of frame structures. Part II: Design and application", Earthq. Eng. Struct. Dyn., 41(5), 929-947. https://doi.org/10.1002/eqe.1165
  30. Tsai, C., Chen, K. and Chen, C. (1998), "Seismic resistibility of high-rise buildings with combined velocity-dependent and velocity-independent devices", ASME-PUBLICATIONS-PVP 366, 103-110.
  31. Turner & Townsend (2016), International Construction Cost Survey 2016-2017.
  32. Wen, Y.K. and Kang, Y.J. (2001), "Minimum building life-cycle cost design criteria I: Methodology", J. Struct. Eng. (ASCE), 127(3), 330-337. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(330)
  33. Xu, Z.D., Shen, Y.P. and Zhao, H.T. (2003), "A synthetic optimization analysis method on structures with viscoelastic dampers", Soil Dyn. Earthq. Eng., 23(8), 683-689. https://doi.org/10.1016/j.soildyn.2003.07.003
  34. Xu, Z.D., Zhao, H.T. and Li, A.Q. (2004), "Optimal analysis and experimental study on structures with viscoelastic dampers. Journal of Sound and Vibration", 273(3), 607-618. https://doi.org/10.1016/S0022-460X(03)00522-4
  35. Xu, Z.D., Liao, Y.X., Ge, T. and Xu, C. (2016), "Experimental and theoretical study of viscoelastic dampers with different matrix rubbers", J. Eng. Mech., 142(8), 04016051. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001101

피인용 문헌

  1. Development of Seismic Retrofit Devices for Building Structures vol.8, pp.3, 2019, https://doi.org/10.21022/ijhrb.2019.8.3.221
  2. Seismic retrofit of a structure using self-centring precast concrete frames with enlarged beam ends vol.72, pp.22, 2018, https://doi.org/10.1680/jmacr.19.00012
  3. Steel hysteretic column dampers for seismic retrofit of soft-first-story structures vol.37, pp.3, 2018, https://doi.org/10.12989/scs.2020.37.3.259