DOI QR코드

DOI QR Code

Reliability Analysis for Decoy using Maintenance Data

정비 데이터를 이용한 기만체계 신뢰도 분석

  • Received : 2018.07.09
  • Accepted : 2018.10.05
  • Published : 2018.10.31

Abstract

The decoy defensive weapon system is a one-shot system. Reliability is maintained through periodic inspection and high reliability is required to confirm whether or not the functioning is normal after launch. The maintenance cycle of a decoy was set up without target reliability and reliability prediction during the development period. However, the number of operations in the military has been increasing, necessitating the optimization of the maintenance cycle. Reliability is analyzed using the maintenance data of a decoy operated for several decades and the optimal maintenance cycle is suggested. In chapter 2, data collection and classification methods are presented and analysis methodology is briefly introduced. In chapter 3, the data distribution analysis and fitness verification confirmed that applying the Weibull distribution is the most suitable for the maintenance data of the decoy. In chapter 4, we present the analysis result of percentile, survival probability and MTBF and the optimal maintenance cycle was derived from the reliability analysis. Finally, we suggest the application methods for this paper in the future.

방어용 무기체계 중 하나인 기만체계는 소모성 방식으로, One-shot system에 해당된다. 주기적 점검을 통해 신뢰도를 유지하며, 발사를 해보아야 정상 작동여부를 확인할 수 있어 고신뢰도가 요구된다. 본 논문에서 분석하고자 하는 기만체계는 개발 시 목표 신뢰도 설정 및 신뢰도 예측 없이 정비주기가 설정되었다. 그러나 현재 군에서 운용 중인 수량이 점점 증가하여 정비주기 최적화 필요성이 대두되었다. 이에 따라 수십 년간 지속적으로 운용된 기만체계의 정비 데이터를 통하여 신뢰도를 분석하고 최적 정비주기를 제시하였다. 2장에서 신뢰도 분석에 사용된 데이터 수집 및 분류방법을 제시하였으며, 분석 방법론에 대해 간략하게 소개하였다. 이를 토대로 3장에서 데이터에 대한 분포 분석 및 적합도 검증을 통해 본 기만체계 정비 데이터는 와이블 분포를 적용 하는 것이 가장 적합함을 확인하였으며, 와이블 분포의 형상 및 척도모수를 추정하였다. 4장에서는 도출된 분포를 통해 백분위수, 생존확률, MTBF 분석결과를 제시하였다. 또한 시간별 신뢰도 분석결과를 통해 적정 정비주기를 도출하였다. 5장 결론에서는 향후 본 연구결과에 대한 향후 활용방안을 제시하였다.

Keywords

References

  1. Y. H. Lim, "A Study on Core Technology Analysis of the Decoy System", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.543-544, 2012.
  2. B. S. Kim, K. S. Lee, D. S. Kim and K. S. Moon, "Certified Missile Rounds Concepts Using Modeling and Simulation", Journal of the Korea Society for Simulation, Vol.18, No.4, pp.95-105, 2009.
  3. J. M. Lee, K. S. Kwon and H. P. Lee, "The Study on Estimating Preventive Maintenance period and Life cycle of Missile system", Proceedings of Korean Institute of Industrial Engineer, pp.1172-1176, 2011.
  4. D. K. Kim, W. S. Kang, S. J. Kang, "A Study on the Storage Reliability Determination Model for One-shot System", Journal of the Korean Operations Research and Management Science Society, Vol.38, No.1, pp.1-13, 2013. DOI: https://dx.doi.org/10.7737/JKORMS.2013.38.1.001
  5. H. G. Kim, S. M. Kwon, K. H. Cho, S. I. Sung, "Development of Quality Improvement Process based on the Maintenance Data of Weapon Systems", Journal of the Korean Society for Quality Management, Vol.43, No.4, pp.499-510, 2015. DOI: https://dx.doi.org/10.7469/JKSQM.2015.43.4.499
  6. S. J. Hong, S. H. Jung, "A Study of Reliability of Guided Missile(OO) using Probit Analysis", Journal of the Korean Society for Quality Management, Vol.44, No.3, pp.553-564, 2016. DOI: https://dx.doi.org/10.7469/JKSQM.2016.44.3.553
  7. Nelson, Wayne, Applied Life Data Analysis, Wiley, 1982.
  8. Nelson, Wayne, "Accelerated Testing: Statistical Models, Test Plans, and Data Analysis", John Wiley & Sons, 2009.
  9. D. S. Bea, Y. L. Jeon, Reliability Analysis, Arche, 1999.
  10. S. K. Seo, Minitab Reliability Analysis, Eretec, 2015.
  11. M. K. Jang, J. S. Choi, J. E. Kim, "A Study on ESS Optimization Management for Improving Reliability and Quality of Electronic Equipments", Journal of Advanced Engineering and Technology, Vol.10, No.3, pp.291-295, 2017.