Computers and Concrete

  • 제22권4호
  • /
  • Pages.383-393
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental study on RC frame structures strengthened by externally-anchored PC wall panels

  • Choi, Seung-Ho (Department of Architectural Engineering, University of Seoul) ;
  • Hwang, Jin-Ha (Department of Architectural Engineering, University of Seoul) ;
  • Lee, Deuck Hang (Department of Civil Engineering, Nazarbayev University) ;
  • Kim, Kang Su (Department of Architectural Engineering, University of Seoul) ;
  • Zhang, Dichuan (Department of Civil Engineering, Nazarbayev University) ;
  • Kim, Jong Ryeol (Department of Civil Engineering, Nazarbayev University)
  • 투고 : 2018.02.08
  • 심사 : 2018.10.11
  • 발행 : 2018.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Infill wall strengthening method has been widely used for seismic strengthening of deteriorated reinforced concrete (RC) frame structures with non-seismic details. Although such infill wall method can ensure sufficient lateral strengths of RC frame structures deteriorated in seismic performances with a low constructional cost, it generally requires quite cumbersome construction works due to its complex connection details between an infill wall and existing RC frame. In this study, an advanced seismic strengthening method using externally-anchored precast wall panels (EPCW) was developed to overcome the disadvantage inherent in the existing infill wall strengthening method. A total of four RC frame specimens were carefully designed and fabricated. Cyclic loading tests were then conducted to examine seismic performances of RC frame specimens strengthened using the EPCW method. Two specimens were fully strengthened using stocky precast wall panels with different connection details while one specimen was strengthened only in column perimeter with slender precast wall panels. Test results showed that the strength, stiffness, and energy dissipation capacity of RC frame specimens strengthened by EPCWs were improved compared to control frame specimens without strengthening.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Almusallam, T.H. and Al-Salloum, Y.A. (2007), "Behavior of FRP strengthened infill walls under in-plane seismic loading", J. Compos. Constr., 11(3), 308-318. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:3(308)
  2. Bailey, C.G. and Yaqub, M. (2012), "Seismic strengthening of shear critical post-heated circular concrete columns wrapped with FRP composite jackets", Compos. Struct., 94(3), 851-864. https://doi.org/10.1016/j.compstruct.2011.09.004
  3. Baran, M. and Tankut, T. (2011), "Experimental study on seismic strengthening of reinforced concrete frames by precast concrete panels", ACI Struct. J., 108(2), 227-237.
  4. Bas, S., Lee, J.H., Sevinc, M. and Kalkan, I. (2017), "Seismic performance of R/C strctures under vertical ground motion", Comput. Concrete, 20(4), 369-380.
  5. Frosch, R.J. (1996), "Panel connections for precast concrete infill walls", ACI Struct. J., 96(4), 467-472.
  6. Frosch, R.J. (1996), "Seismic rehabilitation using precast infill walls", PhD Thesis, Department of Civil Engineering, the University of Texas at Austin, Austin, TX.
  7. Harris, H.G., Ballouz, G.R. and Kopatz, K.W. (1993), "Preliminary studies in seismic retrofitting of lightly reinforced concrete frames using masonry infills", Proceeding of the 6th North American Masonry Conference, Masonry Society, 383-395
  8. Kabeyasawa, T., Toshikazu, K., Kim, Y.S., Kabeyasawa, T. and Bae, K.K. (2009), "Tests on reinforced concrete columns with walls for hyper-earthquake resistant system", Proceedings of the 3rd International Conference on Advanced in Experimental Structural Engineering, October.
  9. Kahn, L.F. and Hanson, R.D. (1979), "Infilled walls for earthquake strengthening", J. Struct. Div., 105(2), 283-296.
  10. Karaca, Z., Turkeli, E. and Pergel, S. (2017), "Seismic assessment of historical masonry strctures: The case of Amasya Tashan", Comput. Concrete, 20(4), 409-418.
  11. Karantoni, F.V. (2013), "Seismic retrofitting of Fragavilla Monastery", Earthq. Struct., 5(2), 207-223. https://doi.org/10.12989/eas.2013.5.2.207
  12. Kim, S.W., Yun, H.D. and Jang, Y.H. (2009), "Structural performance of precast infill walls as a damage-fuse element for seismic retrofit", J. Arch. Inst. Kor., 25(3), 43-50.
  13. Koutas, L., Bousias, S.N. and Triantafillou, T.C. (2015), "Seismic strengthening of masonry-infilled RC frames with TRM: Experimental study", J. Compos. Constr., 19(2), 1-12.
  14. Lee, H.S., Lee, H.B., Hwang, K.R. and Cho, C.S. (2013), "Shake table responses of an RC low-rise building model strengthened with buckling restrained braces at ground story", Earthq. Struct., 5(6), 703-731. https://doi.org/10.12989/eas.2013.5.6.703
  15. Lee, K.S., Wi, J.D., Kim, Y.I. and Lee, H.H. (2009), "Seismic safety evaluation of Korean R/C school buildings built in the 1980s", J. Kor. Concrete Inst., 13(5), 1-11.
  16. Lin, W., Wang, Q., Li, J., Chen, S. and Qi, A. (2017), "Shaking table test of Pounding Tuned Mass Damper (PTMD) on a frame structure under earthqauke excitation", Comput. Concrete, 20(5), 545-553. https://doi.org/10.12989/CAC.2017.20.5.545
  17. Matsumoto, T. (1998), "Structural performance of SC multi-story shear walls with infilled precast concrete panels", JPN Concrete Inst., 20(1), 187-194.
  18. Meshaly, M.E., Yoissef, M.A. and Abou Elfath, H.M. (2014), "Use of SMA bars to enhance the seismic performance of SMA braced RC frames", Earthq. Struct., 6(3), 267-280. https://doi.org/10.12989/eas.2014.6.3.267
  19. Ministry of Education (MOE) and Korea Institute of Educational Environment (KIEE) (2011), "Guideline for seismic evaluation and rehabilitation of exsting school buildings in Korea", 1-108. (in Korean)
  20. Motezaker, M. and Kolahchi, R. (2017), "Seismic response of concrete columns with nanofiber reinforced polymer layer", Comput. Concrete, 20(3), 361-368. https://doi.org/10.12989/CAC.2017.20.3.361
  21. Oesterle, R.G., Fiorato, A.E., Johal, L.S., Carpenter, J.E., Russell, H.G. and Corley, W.G. (1976), "Earthquake resistant structural walls-Tests of isolated walls", Report to National Science Foundation, Construction Technology Laboratories, Portland Cement Association, Skokie, III, October.
  22. Ozden, S., Akguzel, U. and Ozturan, T. (2011), "Seismic strengthening of infilled reinforced concrete frames with composite materials", ACI Struct. J., 108(4), 414-422.
  23. Sahoo, D.R. and Rai, D.C. (2010), "Seismic strengthening of nonductile reinforced concrete frames using aluminum shear links as energy-dissipation devices", Eng. Struct., 32(11), 3548-3557. https://doi.org/10.1016/j.engstruct.2010.07.023
  24. Sittipunt, C., Wood, S.L., Lukkunaprasit, P. and Pattararattanakul, P. (2001), "Cyclic behavior of reinforced concrete structural walls with diagonal web reinforcement", ACI Struct. J., 98(4), 554-562.
  25. Tesser, L. and Talledo, D.A. (2017), "Efficient membrane element for cyclic response of RC panels", Comput. Concrete, 20(3), 351-360. https://doi.org/10.12989/CAC.2017.20.3.351
  26. Tomazevic, M. and Zarnic, R. (1984), "The behaviour of horizontally reinforced masonry walls subjected to cyclic lateral in-plane reversals", Proceeding of the 8th European Conference on Earthquake Engineering, 4(1), 1-8.
  27. Yun, H.D., Kim, S.W., Lee, K.W., Choi, C.S. and Lee, H.Y. (2006), "Seismic performance of lightly reinforced concrete frames with high performance fiber-reinforced cement composite infill walls", J. Arch. Inst. Kor., 22(5), 31-38.