한국위험물학회지 (Korean Journal of Hazardous Materials)

한국위험물학회 (Korean Institute of Hazardous Materials)
권호 표지
DOI QR코드

DOI QR Code

페놀의 연소특성치의 측정 및 예측

Measurement and Prediction of Combustion Properties of n-Phenol

  • 하동명 (세명대학교 보건안전공학과)
  • Ha, Dong-Myeong (Dept. of Occupational Health and Safety Engineering, Semyung University)
  • 투고 : 2018.09.27
  • 심사 : 2018.12.01
  • 발행 : 2018.12.31
⟨ 이전 논문 다음 논문 ⟩

초록

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.

키워드

과제정보

연구 과제 주관 기관 : 세명대학교

참고문헌

  1. Yoo, M. J., Moon, J. Y., Kim, J. B. and Hwang, Y. W., "Chemical Flow Analysis of Hydrogen Fluoride(Hydrofluoric Acid) in the Korean Chemical Industry", Korean J. of Hazardous Materials, 4(1), pp. 25-34, 2016.
  2. Kang, G. H. and Ha, D. M., "The Measurement of Combustible Properties of MSDS of Isobutylbenzene(IBB)", Korean J. of Hazardous Materials, 5(1), pp. 35-41, 2017.
  3. Montemayor, R. G. et al., "Reference Verification Fluids for Flash point Determination", J. of Testing and Evaluation, 27(6), pp. 423-427, 1999. https://doi.org/10.1520/JTE12171J
  4. Mitchell, J. W. et al., "Experimental Flash Points of Industrial Amines", J. of Chem. Eng. Data, 44, pp. 209-211, 1999. https://doi.org/10.1021/je980144h
  5. Godefroy, J. and Jones, C. J., "A Reappraisal of the Flash Point of Formic Acid", J. of Loss Prevention in the Process Industries, 15, pp. 241-243, 2002. https://doi.org/10.1016/S0950-4230(01)00063-8
  6. Ha, D. M, and Lee, S. J., "Measurement of Flash Point and Autoignition Temperature for Xylene Isomers", J. of the Korean Institute of Gas, 13(4), pp.40-45, 2009.
  7. Hilado, C. J. and Clark, S., "Discrepancy and Correlation of Reported Autoignition Temperatures", Fire Technology, 8, pp. 218-27, 1972. https://doi.org/10.1007/BF02590545
  8. Zalosh, R. and Casey, J., "Autoignition Temperature Data and Scaling for Amide Solvents", J. of Loss Prevention in the Process Industries, 23, pp. 71-76, 2010. https://doi.org/10.1016/j.jlp.2009.06.001
  9. Peper, S., Dohrnand, R and Konejung, K., "Methods for the Prediction of Thermodynamics Properties of Polyurethane Raw Materials Mixture", Fluid Phase Equilibria, 424, pp. 137-151, 2016. https://doi.org/10.1016/j.fluid.2015.12.020
  10. De Smedt, G., De Cotre, F., Notele, R., and Berghmans, J., "Comparison of Two Standard Test Methods for Determining Explosion Limits of Gases at Atmospheric Conditions", J. of Hazardous Materials, A70, pp. 105-113, 1999.
  11. Lide, D. R., "Handbook Chemistry and Physics", 76th ed., CRC Press, 1996.
  12. Perry, R. H. and Green, D. W., "Perry's Chemical Engineer's Handbook", 7th ed., McGraw-Hill, 1997.
  13. Lewis, R. J., "SAX's Dangerous Properties of Industrial Materials", 11th ed., John Wiley & Son, Inc., New Jersey, 2004.
  14. KOSHA, http://msds.kosha.or.kr/kcic/msdsdetail.do.
  15. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, National Fire Protection Association, 1991.
  16. Babrauskas, V., "Ignition Handbook", Fire Science Publishers, Society of Fire Protection Engineers, 2003.
  17. Lenga. R. E. and Votoupal, K. L. "The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III", Sigma Chemical Company and Aldrich Chemical Company Inc., 1993.
  18. Lewis, R. J., "Hazardous Chemical Desk Reference", Van Nostrand Reinhold, 1991.
  19. Dean, J. A., "Lange's Handbook of Chemistry", 14th ed. McGraw-Hill, 1992.
  20. Stephenson, S. M., "Flash Points of Organic and Organometallic Compounds", Elsevier, 1987.
  21. Smallwood, I. M., "Handbook Organic Solvent Properties", Arnord, A member of the Hodder Headline Group, 1996.
  22. Hilado, C. J. and Clark, S. W., "Autoignition Temperature of Organic Chemicals", Chemical Engineering, 4, pp. 75-80, 1972.
  23. Scott, G. S., Jones, G. W., and Scott, F. E., "Determination of Ignition Temperature of Combustible Liquids and Gases", Analytical Chemistry, 20(3), pp. 238-241, 1948. https://doi.org/10.1021/ac60015a015
  24. Chen, C. C. and Hsieh, Y. C. "Effect Of Experimental Conditions on Measuring Auto-ignition Temperature of Liquid Chemicals", Ind. Eng. Chem. Res., 49(12), pp. 5925-5932, 2010. https://doi.org/10.1021/ie9020649
  25. Ha, D. M. "Measurement and Prediction of Fire and Explosion Characteristics of n-Butylacetate", J. of the Korean Society of Safety, 32(5), pp. 25-31, 2017.
  26. Gmehling, J., Onken, U. and Arlt, W., Vapor-Liquid Equilibrium Data Collection, Vol. 1, Part1-Part7, DECHEMA, 1980.
  27. Semenov, N. N., "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J., 1959.