Journal of Wind Energy (풍력에너지저널)

Korea Wind Energy Association (한국풍력에너지학회)
권호 표지

Nacelle-Mounted Lidar Beam Line of Sight (LOS) Wind Speed Calibration Procedure Using Meteorological Mast

기상탑을 이용한 나셀 거치형 라이다 빔의 LOS(Line of Sight) 풍속 교정절차

  • 유동훈 (한국산업기술시험원 공업물리표준센터) ;
  • 이민수 (한국산업기술시험원 공업물리표준센터) ;
  • 임채욱 (한국산업기술시험원 공업물리표준센터) ;
  • 고경남 (제주대학교 대학원 풍력공학부) ;
  • 신동헌 (제주대학교 대학원 풍력공학부) ;
  • 강보신 (제주에너지공사 에너지연구기술센터) ;
  • 김동완 (제주에너지공사 에너지연구기술센터)
  • Received : 2018.11.10
  • Accepted : 2018.11.27
  • Published : 2018.12.31

⟨ Previous Next ⟩

Abstract

Wind lidar application is increasing and its calibration method is required to use wind lidar as an alternative to the meteorological mast. A nacelle lidar calibration method is now being discussed in IEC 61400-50-3 (Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for wind measurements), and the method is mainly based on the wind lidar beam line of sight (LOS) wind speed calibration suggested by DTU as DTU E-0020 (Calibrating Nacelle Lidars). In this paper, a LOS wind speed calibration method is introduced and a calibration example performed on Jeju island is presented. The results showed a slope of 1.011 and R2 of 0.997, which means that the LOS wind speed is highly correlated with the reference wind speed and is comparable. But LOS wind speed calibration requires a very long time due to its principle and environmental conditions, and a calibration method that can overcome this problem of uncontrollable environments needs to be developed.

Keywords

Acknowledgement

Grant : 나셀 라이다를 이용한 풍력발전설비 및 풍력단지 출력성능측정 기술개발

Supported by : 한국에너지기술평가원 (KETEP)

References

  1. IEC, 2017, Power performance measurements of electricity producing wind turbines, IEC 61400-12-1 Standard, 2nd edition, International Electrotechnical Commission.
  2. IEC, 2013, Power performance of electricity producing wind turbines based on nacelle anemometry, IEC 61400-12-2 Standard, 1st edition, International Electrotechnical Commission.
  3. Choi, J., 2018, "International Standard Development Status on the wind speed and direction measurement using Nacelle Lidar", The 2018 Fall Conference of Korea Wind Energy Association, Busan, Korea, 10/15-10/17, 1016_EM_SE1_04, p. 3.
  4. DTU, Available online: https://www.dtu.dk/english
  5. Michael Courtney, 2013, Calibrating nacelle lidars, E-Report-0020, DTU Wind Energy.
  6. DNV-GL, Available online: https://www.dnvgl.com/about/in-brief/our-history.html
  7. ECN, Available online: https://www.ecn.nl/about-ecn/krachtenbundeling-ecn-tno/
  8. COWI, Available online: https://www.cowi.com/about/our-story
  9. Borraccino A., Courtney M., and, Wagner R., 2015, Generic methodology for calibrating profiling nacelle lidars, E-Report-0086, DTU Wind Energy.
  10. Borraccino A., Courtney M., and Wagner R., 2016, Calibration report for Avent 5-beam Demonstrator lidar, E-Report-0087, DTU Wind Energy.
  11. Ioannis Antoniou, 2017, "Workshop #6: Nacelle lidar for power curve Summary", IEA Task 32 General meeting 2017, Stuttgart, Germany.