과제정보
연구 과제 주관 기관 : National Natural Science Foundation of China
참고문헌
- AISI S100-2007. North American specification for the design of cold - formed steel structural members, American Iron and Steel Institute. Washington, DC.
- Choi, B. H., Lee, T. H., & Park, Y. M. (2014). Torsional stiffness requirements for diaphragm bracing of discretely braced I-girders. International Journal of Steel Structures, 14, 355. https://doi.org/10.1007/s13296-014-2015-z.
- Chu, X. T., Li, L. Y., & Kettle, R. (2004). Lateral-torsion buckling analysis of partial-laterally restrained thin-walled channel-section beams. Journal of Constructional Steel Research, 60(8), 1159-1175. https://doi.org/10.1016/j.jcsr.2003.11.001
- Chu, X. L., Richard, J., & Li, L. Y. (2005). Influence of lateral restraint on lateral-torsion buckling of cold-formed steel purlins. Thin Walled Structures, 43(5), 800-810. https://doi.org/10.1016/j.tws.2004.10.012
- Chung, K. F., & St Quinton, D. (1996). Structural performance of modern roofs with thick over-purlin insulation-Experimental investigation. Journal of Constructional Steel Research, 40, 17-38. https://doi.org/10.1016/S0143-974X(96)00036-3
- Dundu, M. (2011). Design approach of cold-formed steel portal frames. International Journal of Steel Structures, 11, 259. https://doi.org/10.1007/s13296-011-3002-2.
- EN 1993-1-3:2006. General rules - Supplementary rules for cold - formed members and sheeting. London: British Standards Institution.
- Gajdzicki, M., & Gocezk, J. (2015). Numerical determination of rotational restraint of cold-formed Z purlin according to EC3. International Journal of Steel Structures, 15(3), 633-645. https://doi.org/10.1007/s13296-015-9010-x
- GB 50018-2002. Technical codes of cold - formed thin - wall steel structures. Beijing: China Planning Press.
- GB 50017-2003. Code for Design of steel structure. Beijing: China Planning Press.
- Hancock, G. J. (1998). Design of cold - formed steel structures to the Australian/New Zealand Standard AS/NZS 4600: 1996, 3nd edn. Sydney: Australian Institute of Steel Construction.
- Hancock, G. J., & Trahair, N. S. (1978). Lateral buckling of roof purlins with diaphragm restraints. In Proceedings in metal structures conference, institution of engineers, Perth, Australia (pp. 45-48).
- Katnam, K. B., Van Impe, R., Lagae, G., et al. (2007). A theoretical numerical study of the rotational restraint in cold-formed steel single skin purlin-sheeting systems. Computers & Structures, 85(15-16), 1185-1193. https://doi.org/10.1016/j.compstruc.2006.11.027
- Li, L. Y. (2004). Lateral-torsional buckling of cold-formed zed-purlins partial-laterally restrained by metal sheeting. Thin-Walled Structures, 42(7), 995-1011. https://doi.org/10.1016/j.tws.2004.03.005
- Li, L., Liu, X. L., & Li, X. M. (2000). Theoretical and experimental research on diaphragm-braced C-purlins subjected to wind uplift. Steel Construction, 15(4), 18-20.
- Li, Y. Q., Ma, R. K., Song, Y. Y., & Pan, S. Y. (2013). Experimental study on shear behavior of screw connections for cold-formed thin-walled steel structures. Journal of Tongji University, 41(1), 11-19.
- Lindner, J. (1998). Restraint of beams by trapezoidally sheeting using different types of connection. Stability and Ductility of Steel Structures. https://doi.org/10.1016/B978-008043320-2/50004-6.
- Liu, Z. L., & Ye, J. H. (2010). Numerical simulation of self-tapping screw connections. Journal of Basic Science and Engineering, 18(1), 98-110.
- Long, L. P., Wei, S., & Cui, J. (2004). Experimental investigation on shear behaviour of stressed skin diaphragms connected by selftapping screws. Journal of Building Structures, 25(2), 39-43.
- Lucas, R. M., Al-Bermani, F. G. A., & Kitipornchai, S. (1997). Modelling of cold-formed purlin-sheeting systems-Part 1: Full model. Thin-Walled Structures, 27(4), 263-286. https://doi.org/10.1016/S0263-8231(96)00039-0
- Put, B. M., Pi, Y. L., & Trahair, N. S. (1999a). Lateral buckling tests on cold-formed channel beams. Journal of Structural Engineering, 125(5), 532-539. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(532)
- Put, B. M., Pi, Y. L., & Trahair, N. S. (1999b). Bending and torsion of cold-formed channel beams. Journal of Structural Engineering, 125(5), 540-546. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(540)
- Rousch, C. J., & Hancock, G. J. (1997). Comparison of tests of bridged and unbridged purlins with a non-linear analysis model. Journal of Constructional Steel Research, 41(2), 197-220. https://doi.org/10.1016/S0143-974X(97)00004-7
- Schafer, B. W., & Pekoz, T. (1998). Laterally braced cold-formed steel flexural members with edge stiffened flanges. Journal of Structural Engineering, 125(2), 118-127.
- Schroter, R. C. (1985). Air pressure testing of sheet metal roofing. In Proceedings of the 1985 international symposium on roof technology, structures and techniques, Chicago, IL.
- Tong, G. S., & Zhang, L. (2003). A general theory for the flexuraltorsional buckling of thin-walled members I: Energy method. Advances in Structural Engineering, 6(4), 293-298. https://doi.org/10.1260/136943303322771673
- Tong, G. S., & Zhang, L. (2004). An analysis of current stability theories of thin-walled members. Advances in Structural Engineering, 6(4), 283-292.
- Trahair, N. S. (1993). Flexural-torsional buckling of structures. London: CRC Press.
- Vieira, Jr., L. C. M., Malite, M., & Schafer, B. W. (2008). Numerical analysis of cold-formed steel purlin-sheeting systems. In Proceedings of fifth international conference on thin - walled structures, Brisbane, Australia.
- Vrany, T. (2006). Effect of loading on the rotational restraint of coldformed purlins. Thin-Walled Structures, 44, 1287-1292. https://doi.org/10.1016/j.tws.2007.01.004
- Xu, Y. L., & Reardon, G. F. (1993). Test of screw fastened profiled roofing sheets subjected to simulated wind uplift. Engineering Structures, 15(6), 423-430. https://doi.org/10.1016/0141-0296(93)90060-H
- Zhang, L., & Tong, G. S. (2016). Lateral buckling of simply supported C- and Z-section purlins with top flange horizontally restrained. Thin-Walled Structures, 99, 155-167. https://doi.org/10.1016/j.tws.2015.11.019
- Zhang, Y. C., & Wang, H. M. (2009). Experimental study on bending strength of cold-formed steel C-section members. Journal of Building Structures, 30(3), 53-61.
- Zhang, X. L., & Zhang, Y. C. (2008). Shear tests of screw connections in crest-fixed profiled steel sheetings. China Civil Engineering Journal, 41(6), 33-39.
- Zhu, Y. J., Zhang, Y. C., & Liu, X. L. (1999). Several factors affecting the static behavior of diaphragm-braced beams. Journal of Tianjin University, 32(2), 163-167.
피인용 문헌
- Buckling behavior of cold-formed C/Z-section purlins incorporating the effects of diaphragm and the screw location vol.23, pp.6, 2020, https://doi.org/10.1177/1369433219888739