DOI QR코드

DOI QR Code

A novel preparation and formation mechanism of carbon nanotubes aerogel

  • Li, Shaolong (Qingdao University of Science and Technology) ;
  • He, Yan (Qingdao University of Science and Technology) ;
  • Jing, Chengwei (Qingdao University of Science and Technology) ;
  • Gong, Xiubin (Qingdao University of Science and Technology) ;
  • Cui, Lianlei (Qingdao University of Science and Technology) ;
  • Cheng, Zhongyue (Qingdao University of Science and Technology) ;
  • Zhang, Chuanqi (Qingdao University of Science and Technology) ;
  • Nan, Fei (Qingdao University of Science and Technology)
  • Received : 2017.12.27
  • Accepted : 2018.02.24
  • Published : 2018.10.31

Abstract

A novel, unique, and effective method for carbon nanotube (CNT) dispersion by the free arc stimulation is proposed. CNTs are introduced as an aerogel into the air space via the dispersion method and can be utilized as a solution by adding it to solvents. The volume of the original generated CNT aerogel with a high-volume expansion ratio displays a performance two orders of magnitudes better than that of raw CNTs, which is considered a powerful characterization of the dispersion effect. The CNT aerogel, which was observed by scanning electron microscopy also showed a satisfactory dispersion morphology. Its structure and properties were tested before and after dispersion by Raman spectroscopy and great consistency was observed, which proved that the CNTs were undamaged. This approach may greatly promote the large-scale application of CNTs.

Keywords

References

  1. Iijima S. Helical microtubules of graphitic carbon. Nature, 354, 56 (1191). https://doi.org/10.1038/354056a0.
  2. Venugopal G, Veetil JC, Raghavan N, Singh V, Kumar A, Mukkannan A. Nano-dynamic mechanical and thermal responses of single-walled carbon nanotubes reinforced polymer nanocomposite thin-films. J Alloys Compd, 688, 454 (2016). https://doi.org/10.1016/j.jallcom.2016.07.209.
  3. Zhang W, Chen X, Yong T, Xu N, Guan R, Yue L. Multiwalled carbon nanotube webs welded with Si nanoparticles as high-performance anode for lithium-ion batteries. J Alloys Compd, 688, 216 (2016). https://doi.org/10.1016/j.jallcom.2016.07.172.
  4. Yazdi AA, D'Angelo L, Omer N, Windiasti G, Lu X, Xu J. Carbon nanotube modification of microbial fuel cell electrodes. Biosens Bioelectron, 85, 536 (2016). https://doi.org/10.1016/j.bios.2016.05.033.
  5. Urk D, Demir E, Bulut O, Dilek Cakiroglu, Cebeci FC, Ovecoglu ML, Cebeci H. Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites. Compos Struct, 155, 255 (2016). https://doi.org/10.1016/j.compstruct.2016.05.087.
  6. Atif R, Inam F. Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein J Nanotechnol, 7, 1174 (2016). https://doi.org/10.3762/bjnano.7.109.
  7. Dobrzanski LA, Macek M, Tomiczek B, Nuckowski PM, Nowak AJ. The influence of the dispersion method on the microstructure and properties of MWCNTs/AA6061 composites. Arch Metall Mater, 61, 1229 (2016). https://doi.org/10.1515/amm-2016-0203.
  8. Espinoza-Gonzalez C, Avila-Orta C, Martinez-Colunga G, Lionetto F, Maffezzoli A. A measure of CNTs dispersion in polymers with branched molecular architectures by UDMA. IEEE Trans Nanotechnol, 15, 731 (2016). https://doi.org/10.1109/tnano.2016.2530697.
  9. Li Q, Church JS, Kafi A, Naebe M, Fox BL. An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents. J Nanopart Res, 16, 2513 (2014). https://doi.org/10.1007/s11051-014-2513-0.
  10. Chi MF, Wu WL, Du Y, Chin CJM, Lin CC. Inactivation of Escherichia coli planktonic cells by multi-walled carbon nanotubes in suspensions: effect of surface functionalization coupled with medium nutrition level. J Hazard Mater, 318, 507 (2016). https://doi.org/10.1016/j.jhazmat.2016.07.013.
  11. Park CH, Tocci E, Fontananova E, Bahattab MA, Aljlil SA, Drioli E. Mixed matrix membranes containing functionalized multi-walled carbon nanotubes: mesoscale simulation and experimental approach for optimizing dispersion. J Membr Sci, 514, 195 (2016). https://doi.org/10.1016/j.memsci.2016.04.011.
  12. Yomogida Y, Tanaka T, Zhang M, Yudasaka M, Wei X, Kataura H. Industrial-scale separation of high-purity single-chirality single-wall carbon nanotubes for biological imaging. Nat Commun, 7, 12056 (2016). https://doi.org/10.1038/ncomms12056.
  13. Zhang Y, Li D, Wu L, Zhou L, Du Y, Wang M, Li Y. An intensive dispersion and synchronous assembly of single-walled carbon nanotubes in a surfactant-oil-water association system. Phys Chem Chem Phys, 18, 10947 (2016). https://doi.org/10.1039/c6cp00397d.
  14. Kharisov BI, Kharissova OV, Dimas AV. The dispersion, solubilization and stabilization in "solution" of single-walled carbon nanotubes. RSC Adv, 6, 68760 (2016). https://doi.org/10.1039/c6ra13187e.
  15. Alafogianni P, Dassios K, Farmaki S, Antiohos SK, Matikas TE, Barkoula NM. On the efficiency of UV-vis spectroscopy in assessing the dispersion quality in sonicated aqueous suspensions of carbon nanotubes. Colloids Surf A Physicochem Eng Aspects, 495, 118 (2016). https://doi.org/10.1016/j.colsurfa.2016.01.053.
  16. Jian X, Chen G, Liu H, Mahmood N, Zhu S, Yin L, Tang H, Lv W, He W, Zhang KHL, et al. Vapor-dissociation-solid growth of three-dimensional graphite-like capsules with delicate morphology and atomic-level thickness control. Cryst Growth Des, 16, 5040 (2016). https://doi.org/10.1021/acs.cgd.6b00598.
  17. Shukrullah S, Mohamed NM, Shaharun MS, Naz MY. Parametric study on vapor-solid-solid growth mechanism of multiwalled carbon nanotubes. Mater Chem Phys, 176, 32 (2016). https://doi.org/10.1016/j.matchemphys.2016.03.013.
  18. Allaedini G, Aminayi P, Tasirin SM. Methane decomposition for carbon nanotube production: optimization of the reaction parameters using response surface methodology. Chem Eng Res Des, 112, 163 (2016). https://doi.org/10.1016/j.cherd.2016.06.010.
  19. Tian GL, Huang JQ, Li J, Zhang Q, Wei F. Enhanced growth of carbon nanotube bundles in a magnetically assisted fluidized bed chemical vapor deposition. Carbon, 108, 404 (2016). https://doi.org/10.1016/j.carbon.2016.07.036.
  20. Wei F, Qian WZ. Preparation of Carbon Nanotubes in Large Scale, Science Press, Beijing, 22 (2012).
  21. Akizuki N, Aota S, Mouri S, Matsuda K, Miyauchi Y. Efficient near-infrared up-conversion photoluminescence in carbon nanotubes. Nat Commun, 6, 8920 (2015). https://doi.org/10.1038/ncomms9920.
  22. Li QX, Church JS, Naebe M, Fox BL. A systematic investigation into a novel method for preparing carbonfibre-carbon nanotube hybrid structures. Compos Part A Appl Sci Manuf, 90, 174 (2016). https://doi.org/10.1016/j.compositesa.2016.05.004.
  23. Ajayan PM, lijima S. Capillarity-induced filling of carbon nanotubes. Nature, 361, 333 (1993). https://doi.org/10.1038/361333a0.
  24. Du R, Zhang N, Zhu J, Wang Y, Xu C, Hu Y, Mao N, Xu H, Duan W, Zhuang L, et al. Nitrogen-doped carbon nanotube aerogels for high-performance ORR catalysts. Small, 11, 3903 (2015). https://doi.org/10.1002/smll.201500587.
  25. Zhang Y, Wang F, Zhu H, Zhou L, Zheng X, Li X, Chen Z, Wang Y, Zhang D, Pan D. Preparation of nitrogen-doped biomass-derived carbon nanofibers/graphene aerogel as a binder-free electrode for high performance supercapacitors. Appl Surf Sci, 426, 99 (2017). https://doi.org/10.1016/j.apsusc.2017.07.127.
  26. Zhou H, Wang XH, Liu HZ, Yan M. Enhanced hydrogen storage properties of $2LiBH_4-LiAlH_4$ nanoconfined in resorcinol formaldehyde carbon aerogel. J Alloys Compd, 726, 525 (2017). https://doi.org/10.1016/j.jallcom.2017.07.080.
  27. Misumi S, Matsumoto A, Yoshida H, Sato T, Machida M. Catalytic activity and stability of nanometic Rh overlayers prepared by pulsed arc-plasma deposition and r.f. magnetron-sputtering. Appl Surf Sci, 429, 81 (2018). https://doi.org/10.1016/j.apsusc.2017.06.310.
  28. Dou JH, Wang CY, Gu GC, Chen C. Formation of silicon-calcium-phosphate-containing coating on Mg-Zn-Ca alloy by a two-step micro-arc oxidation technique. Mater Lett, 212, 37 (2018). https://doi.org/10.1016/j.matlet.2017.10.070.
  29. Mallikarjuna HM, Ramesh CS, Koppad PG, Keshavamurthy R, Sethuram D. Nanoindentation and wear behaviour of copper based hybrid composites reinforced with SiC and MWCNTs synthesized by spark plasma sintering. Vacuum, 145, 320 (2017). https://doi.org/10.1016/j.vacuum.2017.09.016.
  30. Wang F, Sun DL, Hong RY, Kumar MR. Surface treatment of carbon nanoparticles by nitrogen/oxygen alternating current arc discharge and the application in ABS/EPDM composites. Compos Part B Eng, 129, 97 (2017). https://doi.org/10.1016/j.compositesb.2017.07.082.