Smart Structures and Systems

  • 제22권4호
  • /
  • Pages.433-440
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A review on pavement porous concrete using recycled waste materials

  • Toghroli, Ali (Department of Civil Engineering, Faculty of Engineering, University of Malaya) ;
  • Shariati, Mahdi (Department of Civil Engineering, Faculty of Engineering, University of Malaya) ;
  • Sajedi, Fathollah (Department of Civil Engineering, Ahvaz Branch, Islamic Azad University) ;
  • Ibrahim, Zainah (Department of Civil Engineering, Faculty of Engineering, University of Malaya) ;
  • Koting, Suhana (Department of Civil Engineering, Faculty of Engineering, University of Malaya) ;
  • Mohamad, Edy Tonnizam (Centre of Tropical Geoengineering (GEOTROPIK), Faculty Civil Engineering, Universiti Teknologi Malaysia) ;
  • Khorami, Majid (Facultad de Arquitectura y Urbanismo, Universidad Tecnologica Equinoccial, Calle Rumipamba s/n y Bourgeois)
  • 투고 : 2018.03.12
  • 심사 : 2018.08.29
  • 발행 : 2018.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Pavements porous concrete is a noble structure design in the urban management development generally enabling water to be permeated within its structure. It has also capable in the same time to cater dynamic loading. During the technology development, the quality and quantity of waste materials have led to a waste disposal crisis. Using recycled materials (secondary) instead of virgin ones (primary) have reduced landfill pressure and extraction demanding. This study has reviewed the waste materials (Recycled crushed glass (RCG), Steel slag, Steel fiber, Tires, Plastics, Recycled asphalt) used in the pavement porous concretes and report their respective mechanical, durability and permeability functions. Waste material usage in the partial cement replacement will cause the concrete production cost to be reduced; also, the concretes' mechanical features have slightly affected to eliminate the disposal waste materials defects and to use cement in Portland cement (PC) production. While the cement has been replaced by different industrial wastes, the compressive strength, flexural strength, split tensile strength and different PC permeability mixes have depended on the waste materials' type applied in PC production.

키워드

참고문헌

  1. Abedini, M. et al. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: a review", J. Asian Sci. Res., 7(5), 165-175.
  2. ACI, A. "522R-10. 2010." Report on pervious concrete. ACI Committee 522: 38.
  3. Aghaee, K. and Foroughi, M. (2013), "Mechanical properties of lightweight concrete partition with a core of textile waste", Adv. Civil Eng., 1-7.
  4. Aghaee, K. et al. (2014), "Mechanical properties of structural lightweight concrete reinforced with waste steel wires", Mag. Concrete Res., 66(1), 1-9. https://doi.org/10.1680/macr.2013.66.1.1
  5. Bao, Y. et al. (2016), "Concrete pavement monitoring with PPPBOTDA distributed strain and crack sensors", Smart Struct. Syst., 18(3), 405-423. https://doi.org/10.12989/sss.2016.18.3.405
  6. Batayneh, M. et al. (2007), "Use of selected waste materials in concrete mixes", Waste Manage., 27(12), 1870-1876. https://doi.org/10.1016/j.wasman.2006.07.026
  7. Bazzaz, M. (2018a), "Experimental and analytical procedures to characterize mechanical properties of asphalt concrete materials for airfield pavement applications", Ph.D., University of Kansas.
  8. Bazzaz, M. et al. (2018), "A Straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Transport. Res. Record, 0361198118782033.
  9. Bazzaz, M. et al. (2018b), "A Straightforward procedure to characterize nonlinear viscoelastic respinse of asphalt concrete at high temperatures", Transport. Res. Record: Transport. Res. Board.
  10. Benazzouk, A. et al. (2006), "Physico-mechanical properties of aerated cement composites containing shredded rubber waste", Cement Concrete Compos., 28(7), 650-657. https://doi.org/10.1016/j.cemconcomp.2006.05.006
  11. Bhargava, K. et al. (2003), "Analytical model of corrosioninduced cracking of concrete considering the stiffness of reinforcement", Struct. Eng. Mech., 16(6), 749-769. https://doi.org/10.12989/sem.2003.16.6.749
  12. Bhutta, M. and Tsuruta, K. (2010), "Evaluation of properties of workable porous concrete", Proceedings of the 35th conference on our world in concrete and structures.
  13. Brinkler, K. (2004), CARE report on automotive glass recycling. 2004 update, london: consortium for automotive recycling. (The consortium represents the United Kingdom's main motor vehicle manufacturers, importers, and dismantlers.).
  14. Chesner, W.H. et al. (1998), User guidelines for waste and byproduct materials in pavement construction.
  15. Council, N.R. (2011), Asphalt shingles waste management in the Northeast fact sheet.
  16. Driscoll, G. and Slutter, R. (1961), Research on composite design at Lehigh University, Month.
  17. Edwards, D. and Schelling, J. (1999), "Municipal waste life cycle assessment: Part 2: Transport analysis and glass case study", Process Saf. Inviron. Protection, 77(5), 259-274. https://doi.org/10.1205/095758299530143
  18. Ganjian, E. et al. (2015), "Using waste materials and by-products to produce concrete paving blocks", Constr. Build. Mater., 77, 270-275. https://doi.org/10.1016/j.conbuildmat.2014.12.048
  19. Ganjian, E. et al. (2009), "Scrap-tyre-rubber replacement for aggregate and filler in concrete", Constr. Build. Mater., 23(5), 1828-1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020
  20. Gesoglu, M. et al. (2014), "Abrasion and freezing-thawing resistance of pervious concretes containing waste rubbers", Constr. Build. Mater., 73, 19-24.
  21. Ghataora, G. et al. (2004), "Summary project report on the utilization of recycled aggregates generated from highway arising and steel slag fines", University of Birmingham, Birmingham, UK.
  22. Ghosh, S.K. et al. (2015), "A review on performance of pervious concrete using waste materials", Int. J. Res. Eng. Technol., 4(13), 105-115.
  23. Gonzalez-Torre, P.L. et al. (2003), "Some comparative factors regarding recycling collection systems in regions of the USA and Europe", J. Environ. Manage., 69(2), 129-138.
  24. Griffiths, C.T. and Krstulovich, J.M. (2002), Utilization of recycled materials in Illinois highway construction, Illinois. Dept. of Transportation.
  25. Group, U.T.W. (2001), "Fifth annual report of the used tyre working group", Internet Site: www.tyredisposal.co.uk.
  26. Hager, A. et al. (2017), Sustainable design of pervious concrete pavement systems.
  27. Hansen, K.R. and Copeland, A. (2013), Annual asphalt pavement industry survey on recycled materials and warm-mix asphalt usage, 2009-2012.
  28. Hassan, K. et al. (2004), Development of new materials for secondary and recycled aggregates in highway infrastructure.
  29. Hird, A.B. et al. (2002), "Tyre waste and resource management: a mass balance approach", Viridis Report VR2.
  30. Huang, Y. et al. (2007), "A review of the use of recycled solid waste materials in asphalt pavements", Resour. Conserv. Recy., 52(1), 58-73. https://doi.org/10.1016/j.resconrec.2007.02.002
  31. Hylands, K. and Shulman, V. (2003), Civil engineering applications of tyres. Viridis Report VR5. Crowthome, TRL Limited.
  32. Jain, A. and Chouhan, J. (2011), "Effect of shape of aggregate on compressive strength and permeability properties of pervious concrete", Int. J. Adv. Eng. Res. Stud., 1, 120-126.
  33. Jain, A.K., Chouhan, J.S. and Goliya, S.S. (2011), "Effect of shape and size of aggregate on permeability of pervious concrete", J. Eng. Res. Studies, 2(4), 48-51.
  34. Ji, X. et al. (2017), "Anchorage properties at the interface between soil and roots with branches", J. Forestry Res., 28(1), 83-93.
  35. Joshaghani, A. (2016), "The effects of zeolite as supplementary cement material on pervious concrete", Proceedings of the International Concrete Sustainability Conference, Washington, DC.
  36. Kacha, S.A.P.S. (2016), "Utilization of waste materials in the production of pervious concrete-A", Int. J. Sci. Res. Development., 4(9),442-449.
  37. Kalyoncu, R.S. (2001), "Slag-iron and steel", US geological survey minerals yearbook 2001.
  38. Krivtsov, V. et al. (2004), "Analysis of energy footprints associated with recycling of glass and plastic—case studies for industrial ecology", Ecological Modell., 174(1), 175-189.
  39. Kuo, W.T. et al. (2013), "Use of washed municipal solid waste incinerator bottom ash in pervious concrete", Cement Concrete Compos., 37, 328-335. https://doi.org/10.1016/j.cemconcomp.2013.01.001
  40. Lee, M.J. et al. (2013), "Purification study of pervious concrete pavement", IACSIT Int. J. Eng. Technol., 5(5), 532-535.
  41. Lucke, T. et al. (2015), "A simple field test to evaluate the maintenance requirements of permeable interlocking concrete pavements", Water, 7(6), 2542-2554. https://doi.org/10.3390/w7062542
  42. Mukhopadhyay, A. and Shi, X. (2017), Validation of RAP and/or RAS in Hydraulic Cement Concrete: Technical Report.
  43. Nobakht, M. et al. (2017), "Selection of structural overlays using asphalt mixture performance", J. Mater. Civil Eng., 29(11), 04017209. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002070
  44. Olivier, J.G. et al. (2012), "Trends in global CO2 emissions; 2012 Report, The Hague: PBL Netherlands Environmental Assessment Agency", Joint Research Centre, Ispra.
  45. Parry, T. (2004), "Briefing: Development of asphalt and concrete products incorporating alternative aggregates", Proceedings of the Institution of Civil Engineers-Engineering Sustainability, Month.
  46. Patel, M.T.N., Jochem, E. and Worrell, E. (2000), "Recycling of plastics in Germany", Resour. Conserv. Recy., 29, 65-90. https://doi.org/10.1016/S0921-3449(99)00058-0
  47. Patil, P. and Murnal, S.M. (2014), "Study on the properties of pervious concrete", Int. J. Eng. Res. Technol., ISSN: 2278-0181.
  48. Pratik, P. and Patel, M.E.T. (2014), "Evaluation of strengths and permeability of pervious concrete", Department Of Civil Engineering.
  49. Ramadhansyah, P. et al. (2014), Porous Concrete Pavement Containing Nano-silica: Pre-Review, Advanced Materials Research.
  50. Ravindrarajah, R.S. and Yukari, A. (2010), "Environmentally friendly pervious concrete for sustainable construction", Proceedings of the 35th Conference on Our World in Concrete & Structures.
  51. Sakhaeifar, M.S. et al. (2015), Selection of Long Lasting Rehabilitation Treatment Using Life Cycle Cost Analysis and Present Serviceability Rating: 1-264.
  52. Shah, D.S. and Pitroda, J. (2013), "Assessment for use of gravel In pervious concrete", Int. J. Eng. Trend. Technol., 4(10), 4306-4310.
  53. Shakrani, S.A. et al. (2017), "Applications of waste material in the pervious concrete pavement: A review", Proceedings of the AIP Conference.
  54. Sharbatdar, M.K.B. et al. (2008), "Behavior of fiber concrete under impact and explosive load", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
  55. Shulman, V.L. (2000), "Tyre recycling after 2000: status and options".
  56. Skripkiūnas, G. et al. (2010), "Porosity and durability of rubberized concrete", Proceedings of the 2nd International Conference on sustainable construction materials and technologies.
  57. Slag, S. (2001), "A premier construction aggregate", NSA.
  58. Sriravindrarajah, R. et al. (2012), "Mix design for pervious recycled aggregate concrete", Int. J. Concrete Struct. Mater., 6(4), 239-246. https://doi.org/10.1007/s40069-012-0024-x
  59. Talsania, S. et al. (2015),"A review of pervious concrete by using various industrial waste materials".
  60. Thomas, B.S. et al. (2014), "Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates", Constr. Build. Mater., 59, 204-212. https://doi.org/10.1016/j.conbuildmat.2014.01.074
  61. Thomas, B.S. et al. (2016), "Recycling of waste tire rubber as aggregate in concrete: durability-related performance", J. Clean. Prod., 112, 504-513.
  62. Tiernan, J. (2005), Cement producing system incorporating a waste derived fuel suspension burner for a down draft calciner, Google Patents.
  63. Turgut, P. and Yahlizade, E.S. (2009), "Research into Concrete Blocks with Waste Glass".
  64. WRAP (2003c), "Survey of applications, markets & growth opportunities for recycled plastics in the UK".
  65. WRAP. (2003b), "Standards and specifications affecting plastics recycling in the UK".
  66. Zhang, Z. et al. (2017), "Influence of crushing index on properties of recycled aggregates pervious concrete", Constr. Build. Mater., 135, 112-118.

피인용 문헌

  1. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2018, https://doi.org/10.12989/scs.2020.34.1.155
  2. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2018, https://doi.org/10.12989/scs.2020.34.3.347
  3. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2018, https://doi.org/10.12989/scs.2020.34.5.743
  4. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2018, https://doi.org/10.12989/acc.2020.9.4.355
  5. Effect of progressive shear punch of a foundation on a reinforced concrete building behavior vol.35, pp.2, 2018, https://doi.org/10.12989/scs.2020.35.2.279
  6. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2018, https://doi.org/10.12989/acc.2020.10.5.393
  7. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  8. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  9. Investigating the effect of using three pozzolans separately and in combination on the properties of self-compacting concrete vol.11, pp.2, 2018, https://doi.org/10.12989/anr.2021.11.2.141
  10. Experimental study of reversal of multidrug resistance in human leukemia K562/DOX cells by toad venom vol.11, pp.2, 2018, https://doi.org/10.12989/anr.2021.11.2.219
  11. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2018, https://doi.org/10.12989/sss.2021.28.2.167
  12. Fracture behavior and crack mode of steel slag pervious concrete using acoustic emission technique vol.28, pp.9, 2018, https://doi.org/10.1002/stc.2796
  13. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2018, https://doi.org/10.12989/scs.2021.40.6.853