DOI QR코드

DOI QR Code

Fragility assessment of RC bridges using numerical analysis and artificial neural networks

  • Razzaghi, Mehran S. (Department of Civil Engineering, Qazvin Branch, Islamic Azad University) ;
  • Safarkhanlou, Mehrdad (Department of Civil Engineering, Qazvin Branch, Islamic Azad University) ;
  • Mosleh, Araliya (CONSTRUCT-LESE, Department of Civil Engineering, Faculty of Engineering, University of Porto) ;
  • Hosseini, Parisa (Department of Civil Engineering, Qazvin Branch, Islamic Azad University)
  • 투고 : 2017.11.22
  • 심사 : 2018.07.16
  • 발행 : 2018.10.25

초록

This study provides fragility-based assessment of seismic performance of reinforced concrete bridges. Seismic fragility curves were created using nonlinear analysis (NA) and artificial neural networks (ANNs). Nonlinear response history analyses were performed, in order to calculate the seismic performances of the bridges. To this end, 306 bridge-earthquake cases were considered. A multi-layered perceptron (MLP) neural network was implemented to predict the seismic performances of the selected bridges. The MLP neural networks considered herein consist of an input layer with four input vectors; two hidden layers and an output vector. In order to train ANNs, 70% of the numerical results were selected, and the remained 30% were employed for testing the reliability and validation of ANNs. Several structures of MLP neural networks were examined in order to obtain suitable neural networks. After achieving the most proper structure of neural network, it was used for generating new data. A total number of 600 new bridge-earthquake cases were generated based on neural simulation. Finally, probabilistic seismic safety analyses were conducted. Herein, fragility curves were developed using numerical results, neural predictions and the combination of numerical and neural data. Results of this study revealed that ANNs are suitable tools for predicting seismic performances of RC bridges. It was also shown that yield stresses of the reinforcements is one of the important sources of uncertainty in fragility analysis of RC bridges.

키워드

참고문헌

  1. Adeli, H. (2001), "Neural networks in civil engineering: 1989-2000", Comput. Aid. Civil Infrastr. Eng., 16(2), 126-142. https://doi.org/10.1111/0885-9507.00219
  2. Agrawal, A., Ghosn, M., Alampalli, S. and Pan, Y. (2011), "Seismic fragility of retrofitted multispan continuous steel bridges in New York", J. Bridge Eng., 17(4), 562-575. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000290
  3. Arslan, M.H. (2010), "Predicting of torsional strength of RC beams by using different artificial neural network algorithms and building codes", Adv. Eng. Softw., 41(7), 946-955. https://doi.org/10.1016/j.advengsoft.2010.05.009
  4. ATC (1991), "Seismic vulnerability and impact of disruption of lifelines in the Coterminous United States", Report No. ATC-25, Applied Technology Council, Redwood City, CA.
  5. Aviram, A., Mackie, K.R. and Stojadinovic, B. (2008), "Guidelines for nonlinear analysis of bridge structures in California", Pacific Earthquake Engineering Research Center, College of Engineering University of California, Berkeley, PEER Report 2008/03.
  6. Avsar, O. and Yakut, A. (2012), "Seismic vulnerability assessment criteria for RC ordinary highway bridges in Turkey", Struct. Eng. Mech., 43(1), 127-145. https://doi.org/10.12989/sem.2012.43.1.127
  7. Avsar, O., Yakut, A. and Caner, A. (2011), "Analytical fragility curves for ordinary highway bridges in Turkey", Earthq. Spectra, 27(4), 971-996. https://doi.org/10.1193/1.3651349
  8. Bae, S. and Bayrak, O. (2008), "Plastic hinge length of reinforced concrete columns", ACI Struct. J., 105(3), 290.
  9. Banerjee, S. and Shinozuka, M. (2007), "Nonlinear static procedure for seismic vulnerability assessment of bridges", Comput. Aid. Civil Infrastr. Eng., 22(4), 293-305. https://doi.org/10.1111/j.1467-8667.2007.00486.x
  10. Bayrak, O. and Sheikh, S.A. (2001), "Plastic hinge analysis", J. Struct. Eng., 127(9), 1092-1100. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1092)
  11. Bazant, Z.P. and Bhat, P.D. (1976), "Endochronic theory of inelasticity and failure of concrete", J. Eng. Mech. Div., 102(4), 701-722.
  12. Billah, A. and Alam, M.S. (2015), "Seismic fragility assessment of concrete bridge pier reinforced with superelastic shape memory alloy", Earthq. Spectra, 31(3), 1515-1541. https://doi.org/10.1193/112512EQS337M
  13. Billah, A.M. and Alam, M.S. (2016), "Performance-based seismic design of shape memory alloy-reinforced concrete bridge piers I: Development of performance-based damage states", J. Struct. Eng., 142(12), 04016140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001458
  14. Billah, A.M. and Alam, M.S. (2016), "Performance-based seismic design of shape memory alloy-reinforced concrete bridge piers. I: Development of performance-based damage states", J. Struct. Eng., 142(12), 04016140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001458
  15. Billah, A.M., Alam, M.S. and Bhuiyan, M.R. (2012), "Fragility analysis of retrofitted multicolumn bridge bent subjected to near-fault and far-field ground motion", J. Bridge Eng., 18(10), 992-1004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000452
  16. Brandenberg, S.J., Zhang, J., Kashighandi, P., Huo, Y. and Zhao, M. (2011), "Demand fragility surfaces for bridges in liquefied and laterally spreading ground", Pacific Earthquake Engineering Research Center, College of Engineering University of California, Berkeley, PEER Report 2011/0.
  17. Caltrans (2013), Seismic Design Criteria Version 1.7, California Department of Transportation, Sacramento, CA.
  18. Choi, E., DesRoches, R. and Nielson, B. (2004), "Seismic fragility of typical bridges in moderate seismic zones", Eng. Struct., 26(2), 187-199. https://doi.org/10.1016/j.engstruct.2003.09.006
  19. Computers and Structures Inc. (2009), "Integrated finite element analysis and design of structures basic analysis reference manual", Computers and Structures, Berkeley, CA, USA
  20. Elshafey, A.A., Haddara, M.R. and Marzouk, H. (2010), "Damage detection in offshore structures using neural networks", Marine Struct., 23(1), 131-145. https://doi.org/10.1016/j.marstruc.2010.01.005
  21. Fakharifar, M., Chen, G., Dalvand, A. and Shamsabadi, A. (2015), "Collapse vulnerability and fragility analysis of substandard RC bridges rehabilitated with different repair jackets under postmainshock cascading events", Int. J. Concrete Struct. Mater., 9(3), 345-367. https://doi.org/10.1007/s40069-015-0107-6
  22. FEMA (2003), HAZUS-MH MR1: Technical Manual, Vol. Earthquake Model, Federal Emergency Management Agency; Washington D.C.
  23. FHWA (1995), Seismic Retrofitting Manual for Highway Bridges Publication No.FHWA-RD-94-052, Office of Engineering and Highway Operations R&D, Federal Highway Administration; McLean, VA.
  24. Graham, L.D., Forbes, D.R. and Smith, S.D. (2006), "Modeling the ready mixed concrete delivery system with neural networks", Auto. Constr., 15(5), 656-663. https://doi.org/10.1016/j.autcon.2005.08.003
  25. Hancilar, U., Taucer, F. and Corbane, C. (2013), "Empirical fragility functions based on remote sensing and field data after the 12 January 2010 Haiti earthquake", Earthq. Spectra, 29(4), 1275-1310. https://doi.org/10.1193/121711EQS308M
  26. Hasanzadehshooiili, H., Lakirouhani, A. and Sapalas, A. (2012), "Neural network prediction of buckling load of steel archshells", Arch. Civil Mech. Eng., 12(4), 477-484. https://doi.org/10.1016/j.acme.2012.07.005
  27. HAZUS (1997), MH 2.0, Technical Manual, Federal Emergency Management Agency, Washington, DC.
  28. Hose, Y., Silva, P. and Seible, F. (2000), "Development of a performance evaluation database for concrete bridge components and systems under simulated seismic loads", Earthq. Spectra, 16(2), 413-442. https://doi.org/10.1193/1.1586119
  29. Huo, Y. and Zhang, J. (2012), "Effects of pounding and skewness on seismic responses of typical multispan highway bridges using the fragility function method", J. Bridge Eng., 18(6), 499-515. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000414
  30. Hwang, H., Liu, J. and Chiu, Y. (2001), "Seismic fragility analysis of highway bridges", Center for Earthquake Research and Information, The University of Memphis, MAEC RR-4 Project.
  31. Jara, M., Jara, J. and Olmos, B. (2013), "Seismic energy dissipation and local concentration of damage in bridge bents", Struct. Infrastr. Eng., 9(8), 794-805. https://doi.org/10.1080/15732479.2011.615330
  32. Kalantari, Z. and Razzaghi, M. (2015), "Predicting the buckling capacity of steel cylindrical shells with rectangular stringers under axial loading by using artificial neural networks", Int. J. Eng.-Tran. B: Appl., 28(8), 1154.
  33. Kawashima, K. (2000), "Seismic design and retrofit of bridges", Bull. NZ Soc. Earthq. Eng., 33(3), 265-285.
  34. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", Automated Vehicles Symposium, San Francisco, July.
  35. Kircher, C.A., Nassar, A.A., Kustu, O. and Holmes, W.T. (1997), "Development of building damage functions for earthquake loss estimation", Earthq. Spectra, 13(4), 663-682. https://doi.org/10.1193/1.1585974
  36. Kowalsky, M.J. (2000), "Deformation limit states for circular reinforced concrete bridge columns", J. Struct. Eng., 126(8), 869-878. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(869)
  37. Lagaros, N.D. and Fragiadakis, M. (2007), "Fragility assessment of steel frames using neural networks", Earthq. Spectra, 23(4), 735-752. https://doi.org/10.1193/1.2798241
  38. Mander, J., Priestley, M. and Park, R. (1988), "Observed stressstrain behavior of confined concrete", J. Struct. Eng., 114(8), 1827-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827)
  39. Maroney, B.H. (1995), Large Scale Bridge Abutment Tests to Determine Stiffness and Ultimate Strength Under Seismic Loading, University of California, Davis.
  40. Mehrjoo, M., Khaji, N., Moharrami, H. and Bahreininejad, A. (2008), "Damage detection of truss bridge joints using Artificial Neural Networks", Exp. Syst. Appl., 35(3), 1122-1131.
  41. Monti, G. and Nistico, N. (2002), "Simple probability-based assessment of bridges under scenario earthquakes", J. Bridge Eng., 7(2), 104-114. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:2(104)
  42. Moschonas, I.F., Kappos, A.J., Panetsos, P., Papadopoulos, V., Makarios, T. and Thanopoulos, P. (2009), "Seismic fragility curves for Greek bridges: methodology and case studies", Bull. Earthq. Eng., 7(2), 439-468. https://doi.org/10.1007/s10518-008-9077-2
  43. Mosleh, A. (2016c), "Seismic vulnerability assessment of existing concrete highway Iranian bridges", Doctor of Philosophy, Aveiro University, http://hdl.handle.net/10773/17173.
  44. Mosleh, A., Jara, J. and Varum, H. (2015), "A methodology for determining the seismic vulnerability of old concrete highway bridges by using fragility curves", J. Struct. Eng. Geotech., 5(1), 1-7.
  45. Mosleh, A., Razzaghi, M. S., Jara, J. andVarum, H. (2016b), "Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources", Earthq. Struct., 11(3), 517-538. https://doi.org/10.12989/eas.2016.11.3.517
  46. Mosleh, A., Razzaghi, M.S., Jara, J. and Varum, H. (2016a), "Seismic fragility analysis of typical Pre-1990 bridges due to near and far-field ground motions", Int. J. Adv. Struct. Eng., 8(1), 1-9. https://doi.org/10.1007/s40091-016-0108-y
  47. Mosleh, A., Razzaghi, M.S., Jara, J. and Varum, H. (2018b), "Probabilistic seismic performance analysis of RC bridges", J. Earthq. Eng., 1-25, doi.org/10.1080/13632469.2018.1477637.
  48. Mosleh, A., Sepahvand, S., Varum, H., Jara, J., Razzaghi, M.S. and Marburg, S. (2018a), "Stochastic collocation-based nonlinear analysis of concrete bridges with uncertain parameters", Struct. Infrastr. Eng. J., 14(10),1324-1338. https://doi.org/10.1080/15732479.2018.1434209
  49. Mukherjee, A. and Biswas, S.N. (1997), "Artificial neural networks in prediction of mechanical behavior of concrete at high temperature", Nucl. Eng. Des., 178(1), 1-11. https://doi.org/10.1016/S0029-5493(97)00152-0
  50. MuntasirBillah, A. and ShahriaAlam, M. (2015), "Seismic fragility assessment of highway bridges: a state-of-the-art review", Struct. Infrastr. Eng., 11(6), 804-832. https://doi.org/10.1080/15732479.2014.912243
  51. O'Rourke, M.J. and So, P. (2000), "Seismic fragility curves for ongrade steel tanks", Earthq. Spectra, 16(4), 801-815. https://doi.org/10.1193/1.1586140
  52. Padgett, J.E., Ghosh, J. and Duenas-Osorio, L. (2013), "Effects of liquefiable soil and bridge modelling parameters on the seismic reliability of critical structural components", Struct. Infrastr. Eng., 9(1), 59-77.
  53. Perlovsky, L.I. (2001), Neural Networks and Intellect: Using Model-Based Concepts, Oxford University Press, New York.
  54. Priestley, M.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, John Wiley & Sons.
  55. Rafiq, M., Bugmann, G. and Easterbrook, D. (2001), "Neural network design for engineering applications", Comput. Struct., 79(17), 1541-1552. https://doi.org/10.1016/S0045-7949(01)00039-6
  56. Razzaghi, M.S. and Eshghi, S. (2014), "Probabilistic seismic safety evaluation of precode cylindrical oil tanks", J. Perform. Constr. Facil., 29(6), 04014170. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000669
  57. Razzaghi, M.S. and Mohebbi, A. (2011), "Predicting the seismic performance of cylindrical steel tanks using artificial neural networks (ann)", Acta Polytechnica Hungarica, 8(2), 129-140.
  58. Sadovsky, Z. and Soares, C.G. (2011), "Artificial neural network model of the strength of thin rectangular plates with weld induced initial imperfections", Reliab. Eng. Syst. Saf., 96(6), 713-717. https://doi.org/10.1016/j.ress.2011.02.010
  59. Seo, J. and Linzell, D.G. (2012), "Horizontally curved steel bridge seismic vulnerability assessment", Eng. Struct., 34, 21-32. https://doi.org/10.1016/j.engstruct.2011.09.008
  60. Shamsabadi, A. (2007), "Three-dimensional nonlinear seismic soil-abutment-foundation structure interaction analysis of skewed bridges", Ph.D. Dissertation, University of Southern California, Los Angeles, CA.
  61. Sheikh, S. and Uzumeri, M. (1980), "Strength and ductility of confined concrete columns", J. Struct. Eng., 106, 1079-1102.
  62. Shinozuka, M., Feng, M., Kim, H., Uzawa, T. and Ueda, T. (2003), "Statistical analysis of fragility curves", Report No. MCEER-03-0002, Multidisciplinary Center for Earthquake Engineering Research.
  63. Stefanidou, S.P. and Kappos, A.J. (2017), "Methodology for the development of bridge-specific fragility curves", Earthq. Eng. Struct. Dyn., 46(1), 73-93. https://doi.org/10.1002/eqe.2774
  64. Stewart, J.P., Taciroglu, E., Wallace, J.W., Ahlberg, E.R., Lemnitzer, A., Rha, C. and Salamanca, A. (2007), "Full scale cyclic testing of foundation support systems for highway bridges. Part II: Abutment backwalls", Retrieved from Los Angeles, CA.
  65. Straub, D. and Der Kiureghian, A. (2008), "Improved seismic fragility modeling from empirical data", Struct. Saf., 30(4), 320-336. https://doi.org/10.1016/j.strusafe.2007.05.004
  66. Tavares, D.H., Padgett, J.E. and Paultre, P. (2012), "Fragility curves of typical as-built highway bridges in eastern Canada", Eng. Struct., 40, 107-118. https://doi.org/10.1016/j.engstruct.2012.02.019
  67. Torbol, M. and Shinozuka, M. (2012), "Effect of the angle of seismic incidence on the fragility curves of bridges", Earthq. Eng. Struct. Dyn., 41(14), 2111-2124. https://doi.org/10.1002/eqe.2197
  68. Torbol, M. and Shinozuka, M. (2014), "The directionality effect in the seismic risk assessment of highway networks", Struct. Infrastr. Eng., 10(2), 175-188. https://doi.org/10.1080/15732479.2012.716069
  69. Waszczyszyn, Z. and Bartczak, M. (2002), "Neural prediction of buckling loads of cylindrical shells with geometrical imperfections", Int. J. Nonlin. Mech., 37(4-5), 763-775. https://doi.org/10.1016/S0020-7462(01)00111-1
  70. Whitman, R.V., Vanmarcke, E.H., de Neufville, R.L., Brennan, J., Cornell, C.A. and Biggs, J.M. (1975), "Seismic design decision analysis", J. Struct. Div., 101(5), 1067-1084.
  71. Yazgan, U. (2015), "Empirical seismic fragility assessment with explicit modeling of spatial ground motion variability", Eng. Struct., 100(1), 479-489.