Wind and Structures

  • 제27권4호
  • /
  • Pages.213-221
  • /
  • 2018
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The motion rule of sand particles under control of the sand transportation engineering

  • Xin, Lin-gui (College of Water Resources and Architectural Engineering, Shihezi University) ;
  • Cheng, Jian-jun (College of Water Resources and Architectural Engineering, Shihezi University) ;
  • Chen, Bo-yu (College of Water Resources and Architectural Engineering, Shihezi University) ;
  • Wang, Rui (College of Water Resources and Architectural Engineering, Shihezi University)
  • 투고 : 2017.12.06
  • 심사 : 2018.07.10
  • 발행 : 2018.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the desert and Gobi regions with strong wind and large sediment discharge, sand transporting engineering is more effective than sand blocking and sand fixing measures in sand prevention. This study uses the discrete phase model of 3D numerical simulation to study the motion trail, motion state and distribution rule of sand particles with different grain diameters when the included angle between the main shaft of the feather-row lateral transportation sand barrier and the wind direction changes, and conducts a comparison in combination with the wind tunnel test and the flow field rule of common sand barrier. According to the comparison, when wind-sand incoming flow passes through a feather-row sand barrier, sand particles slow down and deposit within the deceleration area under the resistance of the feather-row sand barrier, move along the transportation area formed by the transportation force, and accumulate as a ridge at the tail of the engineering. With increasing wind speed, the eolian erosion of the sand particles to the ground and the feather-row sand barrier is enhanced, and the sand transporting quantity and throw-over quantity of the feather-row sand barrier are both increased. When sand particles with different grain diameters bypass the feather-row sand barrier, the particle size of the infiltrating sands will increase with the included angle between the main shaft of the feather-row sand barrier and the wind direction. The obtained result demonstrates that, at a constant wind speed, the flow field formed is most suitable for the lateral transportation of the wind-drift flow when the included angle between the main shaft of the feather-row sand barrier lateral transportation engineering and the wind speed is less than or equal to $30^{\circ}$.

키워드

과제정보

연구 과제 주관 기관 : National Natural Sciences Foundation of China, China Postdoctoral Science Foundation

참고문헌

  1. Andrew, F. and Gary, K. (1996), "Toward a model for airflow on the lee side of aeolian dunes", Sedimentology, 43(3), 451-458. https://doi.org/10.1046/j.1365-3091.1996.d01-20.x
  2. Araujo, A.D., Parteli, E.J.R., Poschel, T., Andrade, J.S. and Herrmann, H.J. (2013), "Numerical modeling of the wind flow over a transverse dune", Scientific Reports, 3(16), 2858. https://doi.org/10.1038/srep02858
  3. Chen, F.Z., Qiang, H.F. and Gao, W.R. (2014), "Simulation of aerolian sand transport with sph-fvm coupled method", Acta Physica Sinica, 63(13), 130202-1556.
  4. Cheng, J.J, Lei, J.Q., Li, S.H.Y. and Wang, H.F. (2016a), "Effect of hanging - type sand fence on characteristics of wind - sand flow fields", Wind Struct., 22(5), 555-571. https://doi.org/10.12989/was.2016.22.5.555
  5. Cheng, J.J., Lei, J.Q., Li, S.H.Y. and Wang, F. (2016b), "Disturbance of the inclined inserting - type sand fence to wind - sand flow fields and its sand control characteristics", J. Aeolian Res., 21, 139-150. https://doi.org/10.1016/j.aeolia.2016.04.008
  6. Ellis, J.T. and Sherman, D.J. (2013), "Fundamentals of aeolian sediment transport: wind-blown sand", Treatise on Geomorphology, 85-108.
  7. Gumaa, Y.T., Haffar, I. and Alafifi, M.A. (1998), "Financial appraisal of date-frond mat fence systems for wind erosion control and sand dune stabilization in the arid region of the united arab emirates", J. Arid Environ., 39(4), 549-557. https://doi.org/10.1006/jare.1998.0410
  8. Huang, N., Xia, X. and Tong, D. (2013), "Numerical simulation of wind sand movement in straw checkerboard barriers", Eur. Phys. J. E., 36(9), 1-7. https://doi.org/10.1140/epje/i2013-13001-8
  9. Jackson, D.W.T., Beyers, M., Delgado-Fernandez, I., Baas, A.C. W., Cooper, A.J. and Lynch, K. (2013), "Airflow reversal and alternating corkscrew vortices in foredune wake zones during perpendicular and oblique offshore winds", Geomorphology, 187(5), 86-93. https://doi.org/10.1016/j.geomorph.2012.12.037
  10. Kang, L.Q. and Zou, X.Y. (2011), "Vertical distribution of wind-sand interaction forces in aeolian sand transport", Geomorphology, 125(3), 361-373. https://doi.org/10.1016/j.geomorph.2010.09.025
  11. Lee, S.J., Park, K.C. and Park, C.W. (2002), "Wind tunnel observations about the shelter effect of porous fences on the sand particle movements", Atmosph. Environ., 36(9), 1453-1463. https://doi.org/10.1016/S1352-2310(01)00578-7
  12. Li, B. and Sherman, D.J. (2015), "Aerodynamics and morphodynamics of sand fences: a review", Aeolian Res., 17, 33-48. https://doi.org/10.1016/j.aeolia.2014.11.005
  13. Li, S.H.Y. and Lei, J.Q. (2003), "The ecological restoration functions of the straw-checker sand-barriers-A case study along the desert highways in the Gurbantonggut Desert", Arid Zone Res., 20(1), 7-10.
  14. Li, Z., Wang, Y. and Zhang, Y. (2014b), "A numerical study of particle motion and two‐phase interaction in aeolian sand transport using a coupled large eddy simulation - discrete element method", Sedimentology, 61(2), 319-332. https://doi.org/10.1111/sed.12057
  15. Li, Z.Q., Wang, Y., Zhang, Y. and Wang, L. (2014a), "A random pairing collision model (rpcm) for improving the dem simulation of particle-bed collisions in aeolian sand transport", Particul. Sci. Technol., 32(1), 86-93. https://doi.org/10.1080/02726351.2013.829542
  16. Lima, I.A., Araujo, A.D., Parteli, E.J.R., Andrade, J.S. and Herrmann, H.J. (2017), "Optimal array of sand fences", Nature - Scientific Reports, 7, 45148. https://doi.org/10.1038/srep45148
  17. Luna, M.C.M.M., Parteli, E.J.R., Duran, O. and Herrmann, H. J. (2011), "Model for the genesis of coastal dune fields with vegetation", Geomorphology, 129(3-4), 215-224. https://doi.org/10.1016/j.geomorph.2011.01.024
  18. Mcclure, S., Kim, J.J., Sang, J.L. and Wei, Z. (2017), "Shelter effects of porous multi-scale fractal fences", J. Wind Eng. Ind. Aerod., 163, 6-14. https://doi.org/10.1016/j.jweia.2017.01.007
  19. Mcewan, I.K., Willetts, B.B. and Rice, M.A. (1992), "The grain/bed collision in sand transport by wind", Sedimentology, 39(6), 971-981. https://doi.org/10.1111/j.1365-3091.1992.tb01991.x
  20. Murai, H., Alafifi, M.A., Haffar, I. and Yoshizaki, S. (1990), "Use of date-fronds mat fence as a barrier for wind erosion control. 1. effect of barrier density on sand movement stabilization", Agriculture Ecosyst. Environ., 32(3), 273-282. https://doi.org/10.1016/0167-8809(90)90165-A
  21. Parsons, D.R., Wiggs, G.F.S., Walker, I.J., Ferguson, R.I. and Garvey, B.G. (2004), "Numerical modelling of airflow over an idealised transverse dune", Environ. Model. Softw., 19(2), 153-162. https://doi.org/10.1016/S1364-8152(03)00117-8
  22. Patankar, N.A. and Joseph, D.D. (2001), "Modeling and numerical simulation of particulate flows by the eulerian-lagrangian approach", Int. J. Multiphase Flow, 27(10), 1659-1684. https://doi.org/10.1016/S0301-9322(01)00021-0
  23. Paz, C., Suárez, E., Gil, C. and Concheiro, M. (2015), "Numerical study of the impact of windblown sand particles on a highspeed train", J. Wind Eng. Ind. Aerod., 145(1), 87-93. https://doi.org/10.1016/j.jweia.2015.06.008
  24. Rezaie, S.A. (2009), "Comparison between polylatice polymer and petroleum mulch on seed germination and plant establishment in sand dune fixation", Iranian J. Range Desert Res., 16(134), 124-136.
  25. Rocha, P.A.C., Rocha, H.H.B., Carneiro, F.O.M., Silva, M.E.V. D. and Bueno, A.V. (2014), "$K-{\omega}$, sst (shear stress transport) turbulence model calibration: a case study on a small scale horizontal axis wind turbine", Energy, 65, 412-418. https://doi.org/10.1016/j.energy.2013.11.050
  26. Smyth, T.A.G. (2016), "A review of computational fluid dynamics (cfd) airflow modelling over aeolian landforms", Aeolian Res., 22, 153-164. https://doi.org/10.1016/j.aeolia.2016.07.003
  27. Sterk, G., Jacobs, A.F.G. and Van Boxel, J.H. (1998), "The effect of turbulent flow structures on saltation sand transport in the atmospheric boundary layer", Earth Surf. Proc. Landf., 23(10), 877-887. https://doi.org/10.1002/(SICI)1096-9837(199810)23:10<877::AID-ESP905>3.0.CO;2-R
  28. Sun, Q.C., Wang, G.Q. and Xu, Y. (2001), "Dem applications to aeolian sediment transport and impact process in saltation", Particulate Sci. Technol., 19(4), 339-353. https://doi.org/10.1080/02726350290057877
  29. Taniere, A., Oesterle, B. and Monnier, J.C. (1997), "On the behaviour of solid particles in a horizontal boundary layer with turbulence and saltation effects", Exp. Fluids, 23(6), 463-471. https://doi.org/10.1007/s003480050136
  30. Tian, L., Wu, W., Zhang, D., Lu, R. and Wang, X. (2015), "Characteristics of erosion and deposition of straw checkerboard barriers in alpine sandy land", Environ. Earth Sci., 74(1), 573-584. https://doi.org/10.1007/s12665-015-4059-6

피인용 문헌

  1. Wind-sand coupling movement induced by strong typhoon and its influences on aerodynamic force distribution of the wind turbine vol.30, pp.4, 2018, https://doi.org/10.12989/was.2020.30.4.433