한국기계기술학회지 (Journal of the Korean Society of Mechanical Technology)

  • 제20권6호
  • /
  • Pages.836-843
  • /
  • 2018
  • /
  • 1229-604X(pISSN)
  • /
  • 2508-3805(eISSN)
한국기계기술학회 (Korean Society of Mechanical Technology)
권호 표지
DOI QR코드

DOI QR Code

120밀리 자주박격포 사격 충격에 따른 마운트 구조 안정성 분석

Structural Stability Analysis of a Mount in 120mm Self-propelled Mortar

  • 투고 : 2018.10.29
  • 심사 : 2018.11.22
  • 발행 : 2018.12.28
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, dynamic model of 120mm self-propelled mortar is developed, and multi flexible body dynamics analysis is performed to analyze stresses occurring in the mount during mortar fire. For this, vehicle dynamic system, mortar dynamic system, and finite element mount model are proposed. The commercial program Recurdyn is used in the analysis. As a result of the analysis, the maximum stress(146.9MPa) occurred at the mount side plate. In order to analyze the validity of the analysis results, we performed strain measurement tests by selecting three major points, and the errors of results were 7.91%, 11.15%, and 18.23%, respectively. It is confirmed that the tendency of analysis and test is similar.

키워드

참고문헌

  1. Lim, T. K., Park, Y. I., Park, S. W. and Park, C. K., "Dynamic Characteristics Analysis of 120MM Mortar with Rocket Assisted Propulsion," The Korean Society of Propulsion Engineers, pp. 28-31, 2016
  2. Jin, J. H., Jung, S., Kim, T. Y., Kim, Y. K., Ahn, C. G. and Yoo, W. S., "Accuracy of Fire of a Mortar via Multibody Dynamics Analysis," Transactions of the Korean Society of Mechanical Engineers - A, Vol. 40, No. 2, pp. 229-236, 2016 https://doi.org/10.3795/KSME-A.2016.40.2.229
  3. Han, M. S. and Cho J. U., "A Study on the Analysis of Thermal Durability due to the Configuration of Mortar," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 69-76, 2015 https://doi.org/10.14775/ksmpe.2015.14.6.069
  4. Sohn, Y. I., Park, H. S., Lim, Y. K., Choi, W. S., Song, B. S., Ko, Y. J. and Kim, S. G., "Sky-hook Control of Tracked Vehicle Active Suspension," The Korean Society for Noise and Vibration Engineering, pp. 277-282, 1999
  5. Yamakawa, J. and Watanabe, K., "A spatial motion analysis model of tracked vehicles with torsion bar type suspension," Journal of terramechanics, Vol. 41, No. 2-3, pp. 113-126, 2004 https://doi.org/10.1016/j.jterra.2004.02.007
  6. Kim, K. S., "A Study on the Virtual Proving Ground for Vehicle Dynamics Simulation," Jounal of Korean Society of Mechanical Technology, Vol. 11(4), pp. 8-9, 2009
  7. Ahn, K. W., Sung, W. S. and Hwang, W. G., "Dynamic Stress Analysis of Cranktrain Using Flexible Multi-Body Dynamic Model," Jounal of Korean Society of Mechanical Technology, Vol. 12(4), pp. 68-70, 2010
  8. FunctionBay, Recurdyn V9R1 Help, FunctionBay Inc., 2017
  9. Lee, B. H. and Yoo, W. S., "Dynamic Analysis of a Launcher under Impulsive Forces," Transactions of KSAE, Vol. 15, No. 2, pp. 84-91, 1993
  10. Noh, D. K., Kang, Y. K., Ji, J. D., Park. J. S. and Jang, J. S., "Case of Developing Analysis Model for Recoil System for Automatic Gun," Journal of the Korea Society for Simulation, Vol. 24, No. 4, pp. 35-41, 2015 https://doi.org/10.9709/JKSS.2015.24.4.035
  11. Choi, Y. C., Kim, K. S., Kim, O. J. and Yoo, W. S., "Development of CAE Tools for Vehicle Suspension Design (I) - Development of a Bushing Module," Transactions of KSAE, Vol. 6, No. 6, pp. 31-39, 1998
  12. Choi, B. K., Choe, C. R., and Yang, B. S., "Optimal Placement of Strain Gauge for Vibration Measurement : Formulation and Assessment," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 14, No. 8, pp. 757-766, 2004 https://doi.org/10.5050/KSNVN.2004.14.8.757

피인용 문헌

  1. 협소 공간 절삭가공용 앵글 헤드 스핀들 케이스 소형화에 대한 연구 vol.18, pp.6, 2018, https://doi.org/10.14775/ksmpe.2019.18.6.098