Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Composite action of concrete-filled double circular steel tubular stub columns

  • Wang, Liping (School of Civil Engineering, Central South University) ;
  • Cao, Xing-xing (School of Civil Engineering, Central South University) ;
  • Ding, Fa-xing (School of Civil Engineering, Central South University) ;
  • Luo, Liang (School of Civil Engineering, Central South University) ;
  • Sun, Yi (School of Civil Engineering, Central South University) ;
  • Liu, Xue-mei (School of Civil Engineering and Built Environment, Queensland University of Technology) ;
  • Su, Hui-lin (School of Civil Engineering, Central South University)
  • Received : 2018.04.10
  • Accepted : 2018.07.10
  • Published : 2018.10.10
⟨ Previous Next ⟩

Abstract

This paper presents a combined numerical, experimental, and theoretical study on the behavior of the concrete-filled double circular steel tubular (CFDT) stub columns under axial compressive loading. Four groups of stub column specimens were tested in this study to find out the effects of the concrete strength, steel ratio and diameter ratio on the mechanical behavior of CFDT stub columns. Nonlinear finite element (FE) models were also established to study the stresses of different components in the CFDT stub columns. The change of axial and transverse stresses in the internal and external steel tubes, as well as the change of axial stress in the concrete sandwich and concrete core, respectively, was thoroughly investigated for different CFDT stub columns with the same steel ratio. The influence of inner-to-outer diameter ratio and steel ratio on the ultimate bearing capacity of CFDT stub columns was identified, and a reasonable section configuration with proper inner-to-outer diameter ratio and steel ratio was proposed. Furthermore, a practical formula for predicting the ultimate bearing capacity was proposed based on the ultimate equilibrium principle. The predicted results showed satisfactory agreement with both experimental and numerical results, indicating that the proposed formula is applicable for design purposes.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Agheshlui, H., Goldsworthy, H., Gad, E. and Mirza, O. (2017), "Anchored blind bolted composite connection to a concrete filled steel tubular column", Steel Compos. Struct., Int. J., 23(1), 115-130.
  2. Aslani, F., Uy, B., Wang, Z.W. and Patel, V. (2016), "Confinement models for high strength short square and rectangular concretefilled steel tubular columns", Steel Compos. Struct., Int. J., 22(5), 937-974. https://doi.org/10.12989/scs.2016.22.5.937
  3. Baltay, P. and Gjelsvik, A. (1990), "Coefficient of friction for steel on concrete at high normal stress", J. Materials in Civil Eng., 2(1), 46-49. https://doi.org/10.1061/(ASCE)0899-1561(1990)2:1(46)
  4. Beena, K., Naveen, K. and Shruti, S. (2017), "Behaviour of bolted connections in concrete-filled steel tubular beam-column joints", Steel Compos. Struct., Int. J., 25(4), 443-456.
  5. Chang, X., Ru, Z.L., Zhou, W. and Zhang, Y.B. (2013), "Study on concrete-filled stainless steel carbon steel tubular (CFSCT) stub columns under compression", Thin-Wall. Struct., 63, 125-133. https://doi.org/10.1016/j.tws.2012.10.002
  6. Chen, J., Wang, J., Xie, F. and Duan, A. (2016), "Behavior of thinwalled dodecagonal section double skin concrete-filled steel tubular beam-columns", Thin-Wall. Struct., 104, 135-143.
  7. Chen, J., Wang, J. and Li, W. (2017), "Experimental behaviour of reinforced concrete-filled steel tubes under eccentric tension", J. Constr. Steel Res., 136, 91-100.
  8. Ding, F.X., Ying, X.Y. and Zhou, L.C. (2011a), "Unified calculation method and its application in determining the uniaxial mechanical properties of concrete", Front. Archit. Civil Eng. China., 5(3), 381-393. https://doi.org/10.1007/s11709-011-0118-6
  9. Ding, F.X., Yu, Z.W., Bai, Y. and Gong, Y.Z. (2011b), "Elastoplastic analysis of circular concrete-filled steel tube stub columns", J. Constr. Steel Res., 67(10) 1567-1577. https://doi.org/10.1016/j.jcsr.2011.04.001
  10. Ding, F.X., Zhang, T., Wang, L.P. and Fu, L. (2017), "Behavior of concrete-filled round-ended steel tubes under bending", Steel Compos. Struct., Int. J., 25(4), 457-472.
  11. Ding, F.X., Fu, Q., Zhang, T., Wang, L.P. and Fang, C.J. (2018), "Composite action of hollow concrete-filled circular steel tubular stub columns", Steel Compos. Struct., Int. J., 26(6), 693-703.
  12. Idris, Y. and Ozbakkaloglu, T. (2015), "Flexural behavior of FRPHSC-steel double skin tubular beams under reversed-cyclic loading", Thin-Wall. Struct., 87, 89-101. https://doi.org/10.1016/j.tws.2014.11.003
  13. Lee, H.J., Choi, I.R. and Park, H.G. (2017), "Eccentric Compression Strength of Rectangular Concrete-Filled Tubular Columns Using High-Strength Steel Thin Plates", J. Struct. Eng., 143(5), 04016228. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001724
  14. Li, G.X. (2006), "Experimental analysis of double steel tubular short columns subjected under axial compression", Proceedings of the fifty National Conference on Structural Engineering (No. II)., II, 49-53.
  15. Li, D.X., Uy, B., Aslani, F. and Patel, V. (2017), "Behaviour and design of demountable CFST column-column connections under tension", J. Constr. Steel Res., 138, 761-773. https://doi.org/10.1016/j.jcsr.2017.08.027
  16. Ottosen, N.S. and Ristinmaa, M. (2005), 12-Common Plasticity Models, The Mechanics of Constitutive Modeling, pp. 279-319.
  17. Pagoulatou, M., Sheehan, T., Dai, X.H. and Lam, D. (2014), "Finite element analysis on the capacity of circular concretefilled double-skin steel tubular (CFDST) stub columns", Eng. Struct., 72, 102-112. https://doi.org/10.1016/j.engstruct.2014.04.039
  18. Ren, Q.X., Hou, C., Lam, D. and Han, L.H. (2014), "Experiments on the bearing capacity of tapered concrete filled double skin steel tubular (CFDST) stub columns", Steel Compos. Struct., Int. J., 17(5), 665-684.
  19. Romero, M.L., Espinos, A., Portoles, J.M., Hospitaler, A. and Ibanez, C. (2015), "Slender double-tube ultra-high strength concrete-filled tubular columns under ambient temperature and fire", Eng. Struct., 99, 536-545. https://doi.org/10.1016/j.engstruct.2015.05.026
  20. Romero, M.L., Ibanez, C., Espinos, A., Portoles, J.M. and Hospitaler, A. (2017), "Influence of ultra-high strength concrete on circular concrete-filled dual steel columns", Struct., 9, 13-20.
  21. Shekastehband, B., Taromi, A. and Abedi, K. (2017), "Fire performance of stiffened concrete filled double skin steel tubular columns", Fire Safety J., 88, 13-25. https://doi.org/10.1016/j.firesaf.2016.12.009
  22. Tan, K.F. and Pu, X.C. (2011), "Mechanical properties of duplex steel tube high strength concrete short columns under axial compression", J. Southwest Univ. Sci. Tech., 26(3), 9-13. https://doi.org/10.3969/j.issn.1671-8755.2011.03.003
  23. Uenaka, K., Kitoh, H. and Sonoda, K. (2010), "Concrete filled double skin circular stub columns under compression", Thin-Wall. Struct., 48(1), 19-24. https://doi.org/10.1016/j.tws.2009.08.001
  24. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., Int. J., 20(3) 571-597.
  25. Wan, C.Y., Zha, X.X. and Dassekpo, J.B.M. (2017), "Analysis of axially loaded concrete filled circular hollow double steel tubular columns exposed to fire", Fire Safety J., 88, 1-12. https://doi.org/10.1016/j.firesaf.2016.12.007
  26. Wang, Z.B., Tao, Z., Han, L.H., Uy, B., Lam, D. and Kang, W.H. (2017a), "Strength, stiffness and ductility of concrete-filled steel columns under axial compression", Eng. Struct., 135, 209-221. https://doi.org/10.1016/j.engstruct.2016.12.049
  27. Wang, Z.B., Tao, Z. and Yu, Q. (2017b), "Axial compressive behaviour of concrete-filled double-tube stub columns with stiffeners", Thin-Wall. Struct., 120(11), 91-104.
  28. Yao, Y., Li, H. and Tan, K.H. (2016), "Theoretical and numerical analysis to concrete filled double skin steel tubular columns under fire conditions", Thin-Wall. Struct., 98, 547-557. https://doi.org/10.1016/j.tws.2015.10.024

Cited by

  1. Mechanical behavior of outer square inner circular concrete-filled dual steel tubular stub columns vol.38, pp.3, 2018, https://doi.org/10.12989/scs.2021.38.3.305
  2. Fully nonlinear inelastic analysis of rectangular CFST frames with semi-rigid connections vol.38, pp.5, 2021, https://doi.org/10.12989/scs.2021.38.5.497