초록
본 연구는 본격적인 목재수확시기에 대응하여 대형화되어 가는 목재운송차량의 원활한 통행과 노체 피해 방지를 위해 산림기술경영연구소 관내 연약지반을 대상으로 토목섬유를 활용한 노반 조성 후 시간경과에 따른 노면지지력 변화와 대형 목재운송차량의 통행 횟수 증가에 따른 노면지지력 및 침하량 변화를 분석하였다. 그 결과, 노반 조성구간의 경우 약 1년의 시간경과 후 노면지지력이 양호판정기준인 CBR 15% 이상으로 안정화 되어 가는 것으로 나타났으며, 토목섬유별 처리효과는 큰 차이를 보이지 않는 것으로 나타났다. 또한 노반 조성구간에서 대형 목재운송차량의 통행이 최대 300회 이루어진 이후에는 침하량이 허용기준 50 mm 이하로 안정되고, 노면지지력 또한 CBR 20% 이상으로 향상되는 것으로 나타났으며 노반의 두께별로는 큰 차이를 보이지 않았다. 그러나 토목섬유를 활용한 노반을 조성하지 않은 구간에서는 허용기준 이상의 침하와 함께 노면의 지지력은 대형 목재운송차량의 통행이 불가능한 것으로 나타났다. 따라서 대형목재운송차량의 통행을 위한 연약지반의 노면지지력 보강을 위해서는 토목섬유를 부설하고 노반을 최소 0.2 m 이상 조성하는 것이 필요하다.
This study was carried out to provide surface bearing capacity reinforcement of forest road by sub-base facilities based on a soft ground use of geosynthetics to prevent the damage of the road surface passing heavy logging trucks and to pass smoothly heavy truck against growing timber harvesting. The analysis of the road surface bearing capacity as progressing time and the increase of the number of passage of heavy logging trucks were conducted experimental section of forest road on the soft ground in the Forest Technology and Management Research Center. As a result, it was found that the road surface bearing capacity were stabilized at CBR of 15% or more, the effect of reinforcement by type of geosynthetics showed no significant difference after the lapse of about 1 year. After reaching the passage of 300 times for the heavy logging trucks on the sub-base construction section, the settlements was stabilized below the allowable standard of 50 mm, road surface bearing capacity also improved to more than CBR 20% and there was no significant difference in the thickness of the sub-base. However, in the section where the sub-base is not constructed, it is found that the lack of surface bearing capacity with the settlements more than the allowable standard is not possible to pass the heavy logging trucks. Therefore, in order to reinforce the road surface bearing capacity of the soft ground for the passage of the heavy logging trucks, it is necessary to construct a sub-base of at least 0.2 m when using geosynthetics.