소성∙가공 (Transactions of Materials Processing)

  • 제27권5호
  • /
  • Pages.276-280
  • /
  • 2018
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

대형 원뿔형 알루미늄 실린더의 멘드렐 단조 공정 개발

Development of Mandrel Forging Process for Large Conical Aluminum Shell

  • 투고 : 2018.05.31
  • 심사 : 2018.08.29
  • 발행 : 2018.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper has developed a forging process for conical shells for making aluminum cylindrical large shells. An incremental forging process was applied to reduce forging loads and die cost. The preform is designed based on the crosssectional area of the final forged shape. Inner diameter of the preform for mandrel forging is constant, and outer diameter is conical so that it matches the cross-sectional area of the product. However, simulation confirmed that the larger diameter is smaller than predicted and the length is larger than predicted because in the initial stage of forging, the large diameter portion first comes into contact with the anvil at the initial stage of forging and stretches in longitudinal direction. So, it has developed a rule to design the preform considering 3-D deformation instead of plane strain deformation at the beginning stage of mandrel forging. The developed mandrel forging process can be applied to more similar products and economic benefits may be obtained.

키워드

참고문헌

  1. K. J. Kim, J. H. Lim, J. H. Park, B. I. Choi, J. W. Lee, Y. J. Kim, 2012, Light-weight Design of Automotive AA6061 Rear Sub-frame Based on CAE Simulation, Trans. Kor. Soc. Automot. Eng., Vol. 20, No. 3, pp. 77-82. https://doi.org/10.7467/KSAE.2012.20.3.077
  2. S. W. Han, H. S. Jung, 2011, Weight Reducing of Aluminum Extrusion Profiles of a Railway-Car Body Based on Topology and Size Optimization, Trans. Kor Soc. Mech. Eng., A, Vol. 35, No. 2, pp. 213-221. https://doi.org/10.3795/KSME-A.2011.35.2.213
  3. Y. M. Kwon, J. I. Song, Y. S. Lee, J. H. Lee, 2000, Forging Process Design of Aluminum Alloys for Aircraft Parts, Proc. Kor. Soc. Tech. Plast. Fall. Conf., pp. 90-93.
  4. T. Dursun, C. Soutis, 2014, Recent developments in advanced aircraft aluminium alloys, J. Mater. Des., Vol. 56, pp. 862-871. https://doi.org/10.1016/j.matdes.2013.12.002
  5. B. S. Kang, T. W. Ku, 2014, Process Modification and Numerical Simulation for an Outer Race of a CV Joint using Multi-Stage Cold Forging, Trans. Mater. Process. Vol. 23, No. 4, pp. 211-220. https://doi.org/10.5228/KSTP.2014.23.4.211
  6. S.U. Lee, Y.S. Lee, M. W. Lee, D. H. Lee, S. S. Kim, 2010, Precess Design on Fabrication of Large Sized Ring by Mandrel Forging of Hollow Cast Ingot, Trans. Mater. Process. Vol. 19, No. 6, pp. 329-336. https://doi.org/10.5228/KSTP.2010.19.6.329
  7. M. W. Lee, Y. S. Lee, S. W. Lee, D, H, Lee, S. S. Kim, Y. H. Moon, 2009, Microstructure Change of Large Case-forged Product by Forging and Heat Treatment Conditions, Trans. Mater. Process. Vol. 18, No. 6, pp, 458-464. https://doi.org/10.5228/KSPP.2009.18.6.458
  8. DEFORM 3D Version 11.0 User's Manual, 2017.