Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Current Researches on the Protection of Exterior Wood from Weathering

목재의 기상열화 방지에 관한 최근의 연구 동향

  • Kim, Yeong-Suk (Department of Forest Products and Biotechnology, College of Forest Science, Kookmin University)
  • Received : 2018.08.14
  • Accepted : 2018.08.27
  • Published : 2018.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

A review of research trends on wood surface protection for exterior use obtained the following conclusions: It has been reported that inorganic compounds such as chrome and copper used as wood preservatives can protect wood from weathering. It has been shown that precoating with hydrophobic substances such as wax and oil, UV absorbers, and HALS (Hindered Amine Light Stabilizers) enhances weathering resistance on the surface of ACQ-treated wood. Opaque coatings of paint/stains and semitransparent stains on the surface of preservative treated wood can increase the synergistic effects on prevention of weathering deterioration. Also the need for repainting periodically for the protection of the preservative treated wood surface has also been suggested. ZnO or $TiO_2$ of fine particles, metal ions such as Co, Cr, Fe, Mn, Ni and Ti, and UV absorbers such as tris-resorcinol triazine derivatives, triazine and benzotriazole were introduced as additives for preventing UV in the transparent coating on wood. Several reports showed that chemical modification such as methylation, acetylation, or alkylations have made some increases the effects of preventing weathering with the increasing weight gain of chemical formulas. In heat-treated wood, there were various contradictory reports on the resistance of weathering, and there were some other reports emphasizing the necessity of painting with UV resistance, which leads to the necessity of more advanced studies.

본 총설에서는 외부에 사용되는 목재를 풍화인자로부터 보호하기 위해 실행되고 있는 최근의 연구동향에 대해 조사 분석하였다. 주요 기상열화 인자로부터 목재의 표면 보호를 위한 연구 동향에 대하여 조사한 결과 다음과 같은 결론을 얻었다. 목재보존제로 사용된 크롬, 구리 등의 무기화합물이 목재를 기상열화로부터 보호할 수 있는 것으로 보고되었다. 또한 ACQ처리 목재의 표면에 wax나 oil같은 소수성물질과 UV 흡수제, HALS(Hindered Amine Light Stabilizers) 등을 방부목재 표면에 precoating하면 기상열화 저항성을 강화할 수 있다고 보고되었다. 또한 방부목재 표면에 불투명 도막형성의 페인트/스테인 및 반투명스테인등이 기상열화방지에 대한 시너지 효과가 높힐수 있다는 보고들이 다수 있었다. 또한 방부목재의 표면보호를 위한 재도장 처리의 필요성이 시사되었다. 투명성의 도막에 UV방지를 위한 첨가물로서 미세입자의 ZnO 또는 $TiO_2$, Co, Cr, Fe, Mn, Ni과 Ti 등의 금속이온, Tris-resorcinol triazine derivatives, triazine 및 Benzotriazole과 같은 UV흡수제 등이 소개되었다. Methylation, acetylation 또는 alkylation 등과 같이 화학적으로 개질된 경우에는 이로 인한 중량증가가 높은 경우 기상열화 방지효과가 상승된다는 연구들이 소개되었다, 열처리목재의 기상열화 저항성에 대해서는 여러 가지 상반되는 연구보고 들이 있었고, UV저항성을 지닌 도장의 필요성이 강조된 보고가 있어 보다 심도 있는 연구의 필요성이 시사되었다.

Keywords

References

  1. Alfredsen, G., Flæte, P.O., Militz, H. 2013. Decay resistance of acetic anhydride modified wood: a review. International Wood Products Journal 4(3): 137-143. https://doi.org/10.1179/2042645313Y.0000000034
  2. Aloui, F., Ahajji, A., Irmouli, Y., George, B., Charrier, B., Merlin, A. 2007. Inorganic UV absorbers for the photostabilisation of wood-clearcoating systems: comparison with organic UV absorbers. Applied Surface Science 253(8): 3737-3745. https://doi.org/10.1016/j.apsusc.2006.08.029
  3. Arnold, M., Feist, W.C., William R.S. 1992. Effect of weathering new wood on the subsequent performance of semitransparent stain. Forest Products Journal 42(3): 10-14.
  4. Awoyemi, L., Cooper, P., Ung, T. 2009. In-treatment cooling during thermal modification of wood in soy oil medium: soy oil uptake, wettability, water uptake and swelling properties. European Journal of Wood and Wood Products 67(4): 465-470. https://doi.org/10.1007/s00107-009-0346-9
  5. Ayadi, N., Lejeune, F., Charrier, F., Charrier, B., Merlin, A. 2003. Colour stability of heat-treated wood during artificial weathering. Holz alz Roh- und Werkstoff 61(3): 221-226. https://doi.org/10.1007/s00107-003-0389-2
  6. Beckers, E.P.J., de Keijer, M., Militz, H., Stevens, M. 1998. Performance of finishes on wood that is chemically modified by acetylation. Journal of Coatings Technology 70(878): 59-67. https://doi.org/10.1007/BF02697812
  7. Bhat, I., Khalil, H.P.S.A., Awang, K.B., Bakare, I.O., Issam, A.M. 2010. Effect of weathering on physical, mechanical and morphological properties of chemically modified wood materials. Materials & Design 31(9): 4363-4368. https://doi.org/10.1016/j.matdes.2010.03.045
  8. Bull, D.C. 2001. The chemistry of chromated copper aarsenate ll, Preseervative-wood interactions. Wood Science and Technology 34(6): 459-466. https://doi.org/10.1007/s002260000066
  9. Carola, E.C., Mariaenrica, F. 2014. Novel UV-cured nanocomposite used for the protection of walnut wood artworks. Wood Research 59: 229-244.
  10. Chang, S.T., Hon, D.N.S., Feist, W.C. 1982. Photodegradation and Photoprotection of wood surfaces. Wood & Fiber Science 14(2): 104-117.
  11. Chang, S.T., Chou, P.L. 2000. Photodiscoloration inhibition of wood coated with UV-curable acrylic clear coatings and its elucidation. Polymer Degradation and Stability 69: 355-360. https://doi.org/10.1016/S0141-3910(00)00082-3
  12. Chang, S.T., Wand, S.Y., Su, Y.C. 1998. Retention of red color in Taiwania (Taiwania cryptomeriodesHay.) haertwood. Holzforschung 52(1): 13-17. https://doi.org/10.1515/hfsg.1998.52.1.13
  13. Christy, A.G., Senden, T.J., Evans, P.D. 2005. Automated measurement of checks at wood surfaces. Measurement 37(2): 109-118. https://doi.org/10.1016/j.measurement.2004.11.007
  14. Cornfield, A., Hale, M., Fellis, G. 1994. A comparison of analytical and visual techniques used for assessment of weathering properties of chromium and copper azole treated timber, International Research Group on Wood preservation, IRG/WP/94-20023.
  15. Cristea, M.V., Riedl, B., Blanchet, P. 2010. Enhancing the performance of exterior waterborne coatings for wood by inorganic nanosized UV absorbers. Progress in Organic Coatings 69(4): 432-441. https://doi.org/10.1016/j.porgcoat.2010.08.006
  16. Cui, F., Zahora, A.R., 2000. Effect of Water repellent additive on the performance of ACQ treated decks, International Research Group on Wood Preservation IRG/WP 00-40168.
  17. Dubey, M.K., Pang, S., Walker, J. 2010. Color and dimensional stability of oil heat-treated radiata pinewood after accelerated UV weathering. Forest Products Journal 60(5): 453-459. https://doi.org/10.13073/0015-7473-60.5.453
  18. Ekstedt, J. 2002. Influence of coating additives on water vapour absorption and desorption in Norway spruce. Holzforschung 56(6): 663-668. https://doi.org/10.1515/HF.2002.10
  19. Esteves, B.M., Pereira H.M. 2009. Wood modification by heat treatment: A review. BioResources 4(1): 370-404.
  20. Evans, P.D., Michell, A.J., Schmalzl, K.J. 1992. Studies of the degradation and protection of wood surfaces. Wood Science & Technology 26(2): 151-163. https://doi.org/10.1007/BF00194471
  21. Evans, P.D., Pirie, J.D.R., Cunningham, R.B., Donnelly, C.F., Schmalzl, K.J. 1994. A Quantitative weathering study of wood surfaces modified by cchromium VI and iron III compounds. Part 2. Image analysis of cell wall pet micro-checking. Holzforschung 48(4): 331-336. https://doi.org/10.1515/hfsg.1994.48.4.331
  22. Evans, P.D., Schmalzl, K.J. 1989. A Quantitative weathering study of wood surfaces modigied by cchromium VI and iron III compounds. Part 1. Loss in zero-span tensile strength and weight of thin wood veneers. Holzforschung 43(5): 289-292. https://doi.org/10.1515/hfsg.1989.43.5.289
  23. Evans, P.D., Owens, N.L., Schmid, S., Webster, R.D. 2002. Weathering and photostability of benzoylated wood. Polymer Degradation and Stability 76: 291-303. https://doi.org/10.1016/S0141-3910(02)00026-5
  24. Evans, P.D., Vollmer, S., Kim, J.D.W., Chan, G., Kraushaar Gibson, S. 2016. Improving the performance of clear coatings on wood through the aggregation of marginal gains. Coatings 6(4): 66. https://doi.org/10.3390/coatings6040066
  25. Evans, P.D., Wallis, A.F.A., Owen, N.L. 2000a. Weathering of chemically modified wood surfaces-Natural weathering of Scots pine acetylated to different weight gains. Wood Science & Technology 34(2): 151-165. https://doi.org/10.1007/s002260000039
  26. Evans, P.D., Donnelly, C.F., Cunningham, R.B. 2003, Checking of CCA-treated radiata pine decking timber exposed to natural weathering. Forest Products Journal 53(4): 66-71.
  27. Evans, P.D., Wingate-Hill, R., Cunningham, R.B. 2009. Wax and oil emulsion additives:How effective are they at improving the performance of preservative-treated wood. Forest Products Journal 59(1/2): 66-70.
  28. Feist, W.C., Ross, A.S. 1995. Performance and durability of finishes on previously coated CCA-treated wood. Forest Products Journal 45(9): 29.
  29. Feist, W., Williams, R.S., 1991. Weathering durability of chromium-treated southern pine. Forest Products Journal 41(1): 8-14.
  30. Forsthuber, B., Grill, G. 2010. The effects of HALS in the prevention of photodegradation of acrylic clear topcoats and wooden surfaces. Polymer Degradation and Stability 95: 746-755. https://doi.org/10.1016/j.polymdegradstab.2010.02.016
  31. George, B., Suttie, E., Merlin, A., Deglise, X. 2005. Photodegradation and photostabilisation of wood-The state of the art. Polymer Degradation and Stability 88(2): 268-274. https://doi.org/10.1016/j.polymdegradstab.2004.10.018
  32. Gobakken, L.R., Westin, M. 2008. Surface mould growth on five modified wood substrates coated with three different coating systems when exposed outdoors. International Biodeterioration & Biodegradation 62(4): 397-402. https://doi.org/10.1016/j.ibiod.2008.03.004
  33. Grelier, S., Castellan A., Kamdem D.P. 2000. Photoprotection of copper-amine-treated pine. Wood and Fiber Science 32(2): 196-202.
  34. Grill, G., Tscherne, F., Spitaler, I., Forsthuber, B. 2014. Comparison of wood coating durability in natural weathering and artificial weathering using fluorescent UV-lamps and water. European Journal of Wood and Wood Products 72(3): 367-376. https://doi.org/10.1007/s00107-014-0791-y
  35. Hansmann, C., Deka, M., Wimmer, R., Gindl, W. 2006. Artificial weathering of wood surfaces modified by melamine formaldehyde resins. Holz als Roh-und Werkstoff 64(3): 198-203. https://doi.org/10.1007/s00107-005-0047-y
  36. Hayoz, P., Peter, W., Rogez, D. 2003. A new innovative stabilization method for the protection of natural wood. Progress in Organic Coatings 48: 297-309. https://doi.org/10.1016/S0300-9440(03)00102-4
  37. Hill, C.A.S. 2006. Wood modification, Chemical, Thermal and other processes. John Wiley & Sons. Chichester
  38. Hon, D.N.S., Chang, S.T. 1985. Photoprotection of wood surfaces by woo-ion complexes. Wood & Fiber Science 17(1): 92-100.
  39. Hon, D.N.S. 2010. Weathering and photochemistry of wood. In Wood and cellulosic chemistry, 2 ed.; Hon, D. N.-S.; Shiraishi, N., Eds. 513-, The CRC Press, Taylor & Francis Group
  40. Huang, X., Kocaefe, D., Kocaefe, Y. Boluk, Y., Pichette, A. 2012. Changes in wettability of heat-treated wood due to artificial weathering. Wood Science and Technology 46(6); 1215-1237 https://doi.org/10.1007/s00226-012-0479-6
  41. mamura, Y. 1993.Morphological Changes in Acetylated Wood Exposed to Weathering. Wood research : bulletin of the Wood Research Institute Kyoto University 79: 54-61.
  42. Isaji, S. 2016. Weathering durability and service life prediction of coated wood in cold and snowy region. Mokuzaihozon 42(2): 56-61.
  43. Ishikawa, A., Kataoka, Y., Mastunaga, M., Kobayashi, T., Kobayashi, M., Mastunaga, H., Kawamoto, S., Kiguchi, M., Yamamoto, K. 2017. Weatherability of wood preservative semi-transparent coatings (IV) - Effects of re-finishing on service-life extension-, Mokuzaihozon(Wood Protection) 43(2): 80-89.
  44. Jamsa, S., Ahola, P., Viitaniemi, P. 2000. Long-term natural weathering of coated ThermoWood. Pigment & Resin Technology 29(2): 68-74. https://doi.org/10.1108/03699420010317807
  45. Kataoka, Y., Ishikawa, A., Kobayashi, M., Matsunaga, M., Matsunaga, H., Kiguchi, M. 2015. Weatherability of sugi (Crytomeria japonica D.Don) sound brriers - Enhanced performance of coatings applied on preservative-treated wood. Mokuzaihozon 41(2): 62-70.
  46. Kataoka, Y., Yamamoto, K., Kawamoto, S., Kobayashi, M., Kiguchi, M. 2011a. Weatherability of water- borne wood preservative semi-transparent coatings(II) -Performance of coatings after re-finishing without removing old finish. Mokuzaihozon 37(2): 64-73.
  47. Kataoka, Y., Yamamoto, K., Kawamoto, S., Kobayashi, M., Kiguchi, M. 2011b. Weatherability of water- borne wood preservative semi-transparent coatings (III) - The effects of sandinf process prior to re-finishing. Mokuzaihozon 37(6): 264-272.
  48. Khedkar, S.V., Thorat, P.V., Pande, P.S., & Gopalani, R.P., 2017. Study of separation of pigments in paints for development of multicolor paint. Journal for Research, 3(Issue 04), 9-13.
  49. Kiguchi, M., Kataoka, Y., Doi, S., Mori, M., Hasegawa, M., Morita, S., Kinjo, M., Kadekaru, Y., Imamura, Y. 1997. Improvement of weather resistance of film-forming type clear finishes by pre-treatment with PEG and influence of exposure test sites. Mokuzai Hozon 22: 10-17.
  50. Kiguchi, M., Suzuki, M., Kinoshita, T., Kawamura, J. 1997. Evaluation of exterior pigmented stains by a new criterion of refinishing. Mokuzai Gakkaishi 52: 612-617.
  51. Kim, K.H., Lee, D.H., Lee, M.J., 2003a. Effect of Accelerated Weathering on the Leaching of Copper from Preservative Treated Wood. Journal of the Korean Wood Science and Technology 31(4): 38-43
  52. Kim, K.H., Lee, D.H., Lee, M.J., 2003b. Evaluation of Weathering Durability of Waterborne Preservative Treated Wood by Accelerated Weathering. Journal of the Korean Wood Science and Technology 31(4): 44-49.
  53. Kim, Y.S. 2017. Current Researches on The Weathering of Wood. Journal of the Korean Wood Science and Technology 45(5): 483-494. https://doi.org/10.5658/WOOD.2017.45.5.483
  54. Kim, Y.S., Cha, M.Y., Jeong, W.Y., Lee, K.H., Bae, H.J. 2009. Chemical and Morphological Change and Discoloration of Cedar Wood Stored Indoor. Journal of the Korean Wood Science and Technology 37(6): 566-577.
  55. Kim, Y.S., Kim, G.H., Kim, Y.S., 2004. Wood preservation science, Publishing department of Cheonnam National University pp.160.
  56. Kim, Y.S., Shin, H.C., Yoon, S.M., Park, S.H., Kim, S.D., Park M.K. 2017. Research on the characteristics of deteriorated woods by natural and accelerated weathering, A Report on the Consignment Research Projects of the National Institute of Forest Science, National Institute of Forest Science.
  57. Knaebe, M. 2013. Finishline, Paint, stain, varnish, or preservative?, USDA Forest Service/Forest Products Laboratory, www.fpl.fs.fed.us
  58. Korea Forest Service, Regulation 2016-2, Forest Carbon Offset Operating Standard for Social Contribution.
  59. Landry, V., Blanchet, P. 2012. Weathering resistance of opaque PVDF-acrylic coatings applied on wood substrates. Progress in Organic Coatings 75(4): 494-501. https://doi.org/10.1016/j.porgcoat.2012.06.004
  60. Landry, V., Blanchet, P., Zotig, L., Martel, T. 2013. Performance of exterior semitransparent PVDF-acrylic coatings. Journal of Coatings Technology and Research 10(1): 37-46. https://doi.org/10.1007/s11998-012-9421-y
  61. Liu, C., Ahniyaz, A., Evans, P.D. 2010. Preliminary observations of the phothostabilization of wood surfaces with cerium oxide nanoparticles, Inernational Research Group on Wood Protection DocIRG/WP 10-40504.
  62. Liu, R., Ruddick, J.N.R., Jin, L. 1994. The influence of copper(II) chemicals on the weathering or treated wood, Part 1 ACQ treatment of wood on weathering, International Research Group on Wood Preservation, IRG/WP 94-30040.
  63. Murakami, K., Matsuda, H. 1990. Oligoesterified woods based on anhydride and epoxide VIII. Resistances of oligoesterified woods against weathering and biodeterioration. Mokuzai Gakkaishi 36(7): 538-544.
  64. Natale, M.F., Vidal, J.M. 2017. Evaluation of coating applied in treated wood: experiences in Brazil, In: Proceedings ofInternational Research Group on Wood Protection IRG/WP 17-40814.
  65. Nejad, M. 2015. How to Increase the Lifespan of Exterior Wood Coatings, In: Proceedings of International Research Group on Wood Protection IRG/WP 15-40700.
  66. Nejad, M., Cooper, P. 2013. Performance characterization of coatings on treated-wood, Progress in Color, Colornats and Coatings pp.61-65.
  67. Nejad, M., Cooper, P. 2010. Coatings to reduce wood preservative leaching. Environmental Science and Technology 44(16): 6162-6166. https://doi.org/10.1021/es101138v
  68. Nejad, M., Cooper, P. 2011. Exterior wood coatings. Part-1: Performance of semitransparent stains on preservative-treated wood. Journal of Coatings Technology Research 8(4): 449-458. https://doi.org/10.1007/s11998-011-9332-3
  69. Nejad, M., Cooper, P. 2017. Exterior wood coatings, In Wood in Civil Engineering, InTech.
  70. Nejad, M., Dadbin, M., Cooper, P. 2017. studying weathering performance of coatings on thermally modified wood, In: Proceedings ofInternational Research Group on Wood Protection IRG/WP 17-40805.
  71. Nejad, M., Shafaghi, R., Ali, H., Cooper, P. 2012. Coating performance on oil-heat-treated wood for flooring. BioResources 8(2): 1881-1892.
  72. Ohkoshi, M. 2002. FTIR-PAS study of light-induced changes in the surface of acetylated or polyethylene glycol-impregnated wood. Journal of wood science 48(5): 394-401. https://doi.org/10.1007/BF00770699
  73. Ozgenc, O., Hiziroglu, S., Yildiz, U.C. 2012. Weathering properties of wood species treated with different coating applications. BioResources 7(4): 4875-4888.
  74. Pandey, K.K., Pitman, A.J. 2002. Weathering characteristics of modified rubberwood(Hevea brasiliensis). J. Applied Polymer Science 85(3): 622-631. https://doi.org/10.1002/app.10667
  75. Pandey, K.K., Chandrashekar, N. 2006. Photostability of wood surfaces esterified by benzoyl chloride. Journal of Applied Polymer Science 99: 2367-2374. https://doi.org/10.1002/app.22685
  76. Park, C.H., Kim, H.J. 2013. Combustion behavior and weathering characteristic of sodium silicate coated wood. Journal of the Korean Wood Science and Technology pp.162-163.
  77. Petric, M., Knehtl, B., Krause, A., Militz, H., Pavlic, M., Petrissans, M., Rapp, A., Tomazic, M., Welzbacher, C., Gerardin, P. 2007. Wettability of waterborne coatings on chemically and thermally modified pine wood. Journal of Coatings Technology Research 4(2): 203-206. https://doi.org/10.1007/s11998-007-9023-2
  78. Petrissans, M., Gerardin, P., Serraj, M. 2003. Wettability of heat-treated wood. Holzforschung 57(3): 301- 307. https://doi.org/10.1515/HF.2003.045
  79. Pinnell, S.R., Fairhurst, D., Gillies, R., Mitchnick, M.A., Kollias, N. 2000. Microfine zinc oxide is a superior sunscreen ingredient to microfine titanium dioxide. Dermatologic surgery 26(4): 309-314. https://doi.org/10.1046/j.1524-4725.2000.99237.x
  80. Pittman, C.U., Kim, M.G., Nicholas, D.D., Wang, L.C., Kabir, F.R.A., Schultz, T. P., Ingram, L.I. 1992. Wood enhancement treatments. 1. Impregnation of southern yellow pine with melamine-formaldehyde and melamine-ammeline-formaldehyde resins. Holzforschung 46(5): 395-401. https://doi.org/10.1515/hfsg.1992.46.5.395
  81. Pizzi, A. 1980. Wood waterproofing and lignin crosslinking by means of chromium trioxide. guaiacyl units complexes. Journal of Applied Polymer Science 25(11): 2547-2553. https://doi.org/10.1002/app.1980.070251110
  82. Qi, Y., Febrianto, F., Hwang, W.J., Hidayat, W., Jang, J.H., Park, S. W., Kim, N. H. 2016. Color Change of Major Wood Species Planted in Indonesia by Ultraviolet Radiation. Journal of the Korean Wood Science and Technology 44(1): 9-18. https://doi.org/10.5658/WOOD.2016.44.1.9
  83. Rapp, A.O., Peek, R.D. 1999. Melamine resin treated as well as varnish coated and untreated solid wood during two years of natural weathering. Holz als Roh-und Werkstoff 57(5): 331-339. https://doi.org/10.1007/s001070050353
  84. Reinprecht, L., Panek, M. 2015. Effects of wood roughness, light pigments, and water repellent on the color stability of painted spruce subjected to natural and accelerated weathering. BioResources 10(4): 7203-7219.
  85. Rogez, D. 2002. Color stabilization of wood and durability improvement of wood coaings: A new UV lightprotection concept for indoor and ortdoor applications. Paint & Coatings Industry 18(3): 56-65.
  86. Rowell, R. 2005. Handbook of Wood Chemistry and Wood Composites. CRC Press, Boca Raton, pp. 139-185.
  87. Rowell, R.M. 2013. Handbook of wood chemistry and wood composites 2ndedtion, pp. 151-252.
  88. Rowell, R.M., Ibach, R.E., McSweeny, J., Nilsson, T. 2009. Understanding decay resistance, dimensional stability and strength changes in heat-treated and acetylated wood. Wood material science and engineering 4(1-2): 14-22. https://doi.org/10.1080/17480270903261339
  89. Salla, J., Pandey, K.K., Srinivas, K. 2012. Improvement of UV resistance of wood surfaces by using ZnO nanoparticles. Polymer Degradation and Stability 97(4): 592-596. https://doi.org/10.1016/j.polymdegradstab.2012.01.013
  90. Satas, D., Tracton, A.A. 2001. Coatings Technology Handbook, New York: Marcel Dekker. 902.
  91. Schaller, C., Rogez, D. 2007. New approaches in wood coating stabilization. Journal of Coatings Technology and Research 4(4): 401-409. https://doi.org/10.1007/s11998-007-9049-5
  92. Schauwecker, C., Preston, A., Morrell, J.J. 2009. A look at the weathering performance of solid wood decking materials. Journal of Coatings Technology 6(9): 32-38.
  93. Sharrock, R.F. 1990. A European approach to UV protection with a novel pigment. Journal of Coatings Technology 62(789): 125-130.
  94. Shi, Q., Jiang, J.H. 2011. Color stability of heat-treated okan sapwood during artificial weathering. In Advanced Materials Research (Vol. 197), pp. 13-16. Trans Tech Publications.
  95. Shin, H.C., Hwang, W.J., Yoon, S.M., Kim, Y.S. 2018. Changes in physical and chemical characteristics of commercial woods in Korea market exposed to accelerated weathering. Journal of the Korean Wood Science and Technology.
  96. Shoubo, N. 2017. "Maintenance of exterior wood", In the report of open symposium on the woodysm of city and use of preservative treated wood in the 33rdannual conference of Japan Wood Protection Association. Mokuzaihozon 43(5): 290-293.
  97. Singh, A.P., Dawson, B.S. 2003. The mechanism of failure of clear coated wooden boards as revealed by microscopy. International Association Wood Anatomists Journal 24(1): 1-11.
  98. Sivrikaya, H., Can, A., Tumen, I., Aydemir, D. 2017. Weathering performance of wood treated with copper azole and woter repellents. Wood Research 62(3): 437-450.
  99. Stirling, R., Landry, V. 2016. Colorant Treatments to Enhance the Weathering Resistance of Western Red cedar, In: Proceedings ofInternational Research Group on Wood Protection IRG/WP 16-40737.
  100. Stirling, R., Morris, P.I. 2013. Performance of coatings on wood treated with carbon-based preservatives, In: Proceedings ofInternational Research Group on Wood Protection IRG/WP 13-40638.
  101. Sudiyani, Y., Ryu, J.Y., Hattori, N., Imamura, Y. 2001. Phenolic resin treatment of wood for improving weathering properties. In: Imamura, Y. (Ed.), High-performance Utilization of Wood for Outdoor Uses,World Research Institute, Kyoto University, Kyoto. Japan pp. 85-96.
  102. Tanczos, I., Schmidt, H. 2002. Quantam process-new sulfur-free delignification. Journal of Wood Chemistry and Technology 22(4): 219-233. https://doi.org/10.1081/WCT-120016259
  103. Temiz, A., Yildiz, U.C., Aydin, I., Eikenes, M., Alfredsen, G., Colakoglu, G. 2005: Surface roughness and color characteristics of wood treated with preservatives after accelerated weathering test. Applied Surface Science 250(1-4): 35-42. https://doi.org/10.1016/j.apsusc.2004.12.019
  104. The Korea wood newspaper, 2017. The Present Status of Modern Wooden Architecture in Korea, No. 554
  105. Tomak, E.D., Ustaomer, D., Yildiz, S., Pesman, E. 2014. Changes in surface and mechanical properties of heat-treated wood during natural weathering. Measurement 53: 30-39. https://doi.org/10.1016/j.measurement.2014.03.018
  106. Turkoglu, T., Baysal, E., Toker, H. 2015. The effects of natural weathering on color stability of impregnated and varnished wood materials, Advances in Materials Science and Engineering.
  107. Weichelt, F., Emmler, R., Flyunt, R., Beyer, E., Buchmeiser, M.R., Beyer, M. 2010. ZnO‐Based UV Nanocomposites for Wood Coatings in Outdoor Applications. Macromolecular Materials & Engineering 295(2): 130-136. https://doi.org/10.1002/mame.200900135
  108. Williams, R.S., Sotos, P., Feist, W.C. 1999. Evaluation of several finishes on severely weathered wood. Journal of Coatings Technology 71(895): 97-102. https://doi.org/10.1007/BF02697927
  109. Wolkenhauer, A., Wolkenhauer, A., Avramidis, G., Militz, H., Viol, W. 2008. Plasma treatment of heat treated beech wood-investigation on surface free energy. Holzforschung 62(4): 472-474. https://doi.org/10.1515/HF.2008.074
  110. Xing, D., Wang, S., Li, J. 2015. Effect of Artificial Weathering on the Properties of Industrial-Scale thermally Modified Wood. BioResources 10(4), 8238-8252
  111. Yu, Y., Jiang, Z., Wang, G., Song, Y. 2010. Growth of ZnO nanofilms on wood with improved photostability. Holzforschung 64(3): 385-390. https://doi.org/10.1515/HF.2010.049
  112. Yuner, Z., Evans, P.D. 2017. Surface Protection of Wood with Metal Acetylacetonates, In: Proceedings of International Research Group on Wood Protection IRG/WP 17-40802.
  113. Zahora, A.R. 2000. Long-term performance of a "wax' type additive for use with water-borne pressure preservative treatments, International Research Group on Wood Preservation IRG/WP 00-40159.
  114. Zhang, J., Kamdem, D.P., Temiz, A. 2009. Weathering of copper-amine treated wood. Applied Surface Science 256(3): 842-846. https://doi.org/10.1016/j.apsusc.2009.08.071