DOI QR코드

DOI QR Code

세미슬림 AU 합성보의 시공 단계 안전성 평가

Safety Evaluation of Semi-Slim AU Composite Beam During Construction

  • 투고 : 2018.06.09
  • 심사 : 2018.07.16
  • 발행 : 2018.09.15

초록

Recently various composite beams in which concrete is filled in the U-shaped steel plate have been developed for saving story height and reducing construction period. Due to the high flexural stiffness and strength, they are widely being used for the building with large loads and long spans. The semi-slim AU composite beam has proven to take highly improved stability compared to the existing composite beams, because it consists of the closed steel section by attaching cap-type shear connectors to the upper side of U-shaped steel plate. In this study the finite element analyses were performed to evaluate the safety of the AU composite beam with unconsolidated concrete which were sustained through the closed steel section during the construction phase. The analyses were performed on the two types of cross section applied to the fabrication of AU composite beams, and the results were compared to the those of 2-point bending tests. In addition, the flexural performance according to the space of intermittent cap-type shear connectors and the location of reinforcing steel bars for compression was comparatively investigated. Through the results of analytical studies, it is preferable to adopt the yield moment of AU composite beam for evaluating the safety in the construction phase, and to limit the space of intermittent shear connectors to 400 mm or less for the construction load.

키워드

참고문헌

  1. RIST, "Composite slabs and beams using steel decking", Resear Institute of Industrial Science and Technology, 2011.
  2. Kim, S. B., Kim, S. S., Lee, W. L., Kim, J. Y., Lee, S. B., Ryu, D. S., & Kim, D. H., "Study on the Flexible Strength of U-shape Hybrid Composite Beam", Journal of Korean Society of Steel Construction, Vol.24, No.5, pp.521-534, 2012 https://doi.org/10.7781/kjoss.2012.24.5.521
  3. Heo, B. W., Kwak, M. K., Bae, K. W., Jung, S. M., & Kang, S. K., "Flexural Capacity of the Profiled Steel Composite Beams with Truss Deck Plate", Journal of Korean Society of Steel Construction, Vol.19, No.4, pp.413-423, 2007
  4. Kim, S. S., Kim, S. M., Kim, S. B., Seo, D. G., & Kim, K. S., "An Experimental Study on the Behavior of the T-type Steel Composite Beam", Journal of Korean Society of Steel Construction, Vol.16, No.2, pp.225-233, 2004
  5. Kim, D. B., Kim, J. W., Yom, K. S., Kwon, S. M., & Choi, B. J. (2015). Bending Strength Evaluation of The Construction Load of Infilled-type Composite Beam(AU Beam). Proceedings of the 26th Annual Conference, Korean Society of Steel Construction, Republic of Korea, pp.3-4
  6. Lim, H. T., & Choi, B. J., "Shear Capacity Evaluation of Steel Plate Anchors Using Folded Steel Plate in AU-composite Beam", Journal of Korean Society of Steel Construction, Vol.29, No.5, pp.389-400, 2017 https://doi.org/10.7781/kjoss.2017.29.5.389