DOI QR코드

DOI QR Code

광통신용 비구면 글라스 렌즈 자중성형 공정 연구

A Study on the Molding Process of an Optical Communication Aspherical Glass Lens Using the Weight Molding Method

  • 류상 (아이오솔루션(주), 중앙연구소) ;
  • 노경환 (아이오솔루션(주), 중앙연구소) ;
  • 최광현 (아이오솔루션(주), 중앙연구소) ;
  • 김원국 (아이오솔루션(주), 중앙연구소) ;
  • 이원경 (아이오솔루션(주), 중앙연구소) ;
  • 김도희 (아이오솔루션(주), 중앙연구소) ;
  • 양국현 (아이오솔루션(주), 중앙연구소)
  • 투고 : 2018.09.12
  • 심사 : 2018.10.30
  • 발행 : 2018.12.30

초록

In this study, the aspherical lens for optical communications produced not with an one-step pneumatic type of external pressurization system (existed GMP process) but a constant weight of self-loaded mold put up to upper core. So the lens is molding with self-loaded weight molding and it calls Weight Molding process. In self-loaded molding process, we measured changes of center thickness molding lenses with each variable molding temperatures and time to find the effect of center of lens thickness to search key factors. As experimental results, the center thickness reach to targeted lenses step time value was changed drastically and it depends by molding temperature. If the molding temperature gets higher, the targeted lens that is reaching to the center thickness step time value was decreased. To find the effect of life improvement on mold core by imposing the self-loaded molding process we molded with GMP(Glass molding press) method and self-loaded molding method for 9,000 times and measured the lenses shape accuracy and surface roughness to evaluate the core life. As a result the self-loaded molding method core has 2,000 times longer that GMP (Glass molding press) method. If we adopt self-loaded molding method of the optical aspherical lens molding in the future, we expect that it would reduce the expense of changing the molds by molding core life improvements.

키워드

참고문헌

  1. I. K. Kim and J. U. Lee, "Optical design of Gradient-Index objective for optical pick-up," Journal of the Optical Society Korea 18, 256-263 (2007).
  2. K. S. Jang, T. H. Lee, T. Y Rho, C. S. Kim and M. Y. Jeong, "Study on the Superprecision Glass Molding of Aspherical Lens for Optical Communication Module," Journal of the Korean Society for Precision Engineering 27, 18-24 (2010).
  3. D. H. Hyun, "A Study on the Grinding Characteristics of Aspherical Glass Lens core of high-pixel Digital Camera in Diamond grinding Process," Transactions of the Korean Society of Machine Tool Engineers 12, No.2 (2003).
  4. S. Itoh, "Study on Measurement of Axis Symmetrical form Generated by Ultra-Precision Machining," Journal of the Japan Society of Precision Engineering 61, 128-1284 (1997).
  5. H. Jang, K. C. Jang and D. G. Lee, "A Study on the molding of a aspherical glass lens using the high temperature compression molding method," Proceedings of the 2006 Fall Conference of the Korean Society of Precision Engineering.
  6. T. S. Jung, K. S. Park and G. S. Yoon, "A Study on the Optimal Molding Conditions for Aspheric Glass Lenses in Progressive GMP," Journal of the Korea Academia - Industrial cooperation Society.