Computers and Concrete

  • 제22권3호
  • /
  • Pages.279-289
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A numerical study on the seismic behavior of a composite shear wall

  • Naseri, Reza (Department of Civil Engineering, Isfahan University of Technology) ;
  • Behfarnia, Kiachehr (Department of Civil Engineering, Isfahan University of Technology)
  • 투고 : 2018.05.07
  • 심사 : 2018.08.20
  • 발행 : 2018.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Shear walls are one of the important structural elements for bearing loads imposed on buildings due to winds and earthquakes. Composite shear walls with high lateral resistance, and high energy dissipation capacity are considered as a lateral load system in such buildings. In this paper, a composite shear wall consisting of steel faceplates, infill concrete and tie bars which tied steel faceplates together, and concrete filled steel tubular (CFST) as boundary columns, was modeled numerically. Test results were compared with the existing experimental results in order to validate the proposed numerical model. Then, the effects of some parameters on the behavior of the composite shear wall were studied; so, the diameter and spacing of tie bars, thickness and compressive strength of infill concrete, thickness of steel faceplates, and the effect of strengthening the bottom region of the wall were considered. The seismic behavior of the modeled composite shear wall was evaluated in terms of stiffness, ductility, lateral strength, and energy dissipation capacity. The results of the study showed that the diameter of tie bars had a trivial effect on the performance of the composite shear wall, but increasing the tie bars spacing decreased ductility. Studying the effect of infill concrete thickness, concrete compressive strength, and thickness of steel faceplates also showed that the main role of infill concrete was to prevent buckling of steel faceplates. Also, by strengthening the bottom region of the wall, as long as the strengthened part did not provide a support performance for the upper part, the behavior of the composite shear wall was improved; otherwise, ductility of the wall could be reduced severely.

키워드

참고문헌

  1. Behfarnia, K. and Shirneshan, A. (2017), "A numerical study on behavior of CFRP strengthened shear wall with opening", Comput. Concrete, 19(2), 179-189. https://doi.org/10.12989/cac.2017.19.2.179
  2. Chen, L., Mahmoud, H., Tong, S.M. and Zhou, Y. (2015), "Seismic behavior of double steel plate-HSC composite walls", Eng. Struct., 102, 1-12. https://doi.org/10.1016/j.engstruct.2015.08.017
  3. Epackachi, S., Whittaker, A.S., Varma, A.H. and Kurt, E.G. (2015), "Finite element modeling of steel-plate concrete composite wall piers", Eng. Struct., 100, 369-384. https://doi.org/10.1016/j.engstruct.2015.06.023
  4. Hu, H.S., Nie, J.G. and Eatherton, M.R. (2014). "Deformation capacity of concrete-filled steel plate composite shear walls", J. Constr. Steel Res., 103, 148-158. https://doi.org/10.1016/j.jcsr.2014.08.006
  5. Huang, Z. and Liew, J.Y. (2016), "Numerical studies of steelconcrete- steel sandwich walls with J-hook connectors subjected to axial loads", Steel. Compos. Struct., 21(3), 461-477. https://doi.org/10.12989/scs.2016.21.3.461
  6. Ji, X., Jiang, F. and Qian, J. (2013), "Seismic behavior of steel tube-double steel plate-concrete composite walls: experimental tests", J. Constr. Steel Res., 86, 17-30. https://doi.org/10.1016/j.jcsr.2013.03.011
  7. Liang, Q.Q. (2009), "Strength and ductility of high strength concrete-filled steel tubular beam-columns", J. Constr. Steel Res., 65(3), 687-698. https://doi.org/10.1016/j.jcsr.2008.08.005
  8. Mander, J.B., Priestley, M.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  9. Rafiei, S. (2011), "Behavior of double skin profiled composite shear wall system under in-plane monotonic, cyclic and impact loadings", Ph.D. Dissertation, Department of Civil Engineering, Ryerson University, Toronto, Ontario, Canada.
  10. Rafiei, S., Hossain, K.M.A., Lachemi, M., Behdinan, K. and Anwar, M.S. (2013), "Finite element modeling of double skin profiled composite shear wall system under in-plane loadings", Eng. Struct., 56, 46-57. https://doi.org/10.1016/j.engstruct.2013.04.014
  11. Tomii, M. and Sakino, K. (1979), "Elasto-plastic behavior of concrete filled square steel tubular beam-columns", Tran. Arch. Inst. JPN, 280, 111-122. https://doi.org/10.3130/aijsaxx.280.0_111
  12. Zhang, X., Qin, Y. and Chen, Z. (2016), "Experimental seismic behavior of innovative composite shear walls", J. Constr. Steel Res., 116, 218-232. https://doi.org/10.1016/j.jcsr.2015.09.015