초록
본 논문에서는 해상에서 수상감시정찰 및 수중탐색임무를 수행할 수 있는 복합임무 무인수상정을 설계하였으며, 설계된 복합임무 무인수상정의 선체부는 유리섬유강화플라스틱을 이용하여 제작하였다. 수상감시정찰 및 자율운항 임무를 수행하기 위해 레이더, 라이다, 카메라 등과 같은 다양한 항법센서를 마스트에 장착하였으며, 특수임무를 수행하기 위한 더미건 장비를 선수부 갑판에 장착하였다. 악천후의 해상상태에서 주어진 임무를 성공적으로 수행하기 위해서는 갑판에 탑재된 구조물들에 대한 강성확보가 매우 중요하다. 따라서 본 논문에서는 정하중, 횡하중 및 수직방향 운동에 따른 마스트 구조물의 강도해석 및 더미건 장비의 충격량에 대한 선체부의 강도해석을 시뮬레이션 및 실험을 통해 수행하였다. 시뮬레이션 및 실험 결과에 따라 본 연구에서 설계된 마스트 구조물 및 더미건 장착부의 선체부는 충분한 강성을 확보하고 있음을 확인하였다.
The Multi-Mission Unmanned Surface Vehicle(MMUSV), which is manufactured using glass Fiber Reinforced Plastic(FRP) material, is designed to perform a surveillance and reconnaissance on the sea. Various navigation sensors, such as RADAR, RIDAR, camera, are mounted on a mast to perform an autonomous navigation. And a dummy gun is mounted on the deck of the MMUSV for a target tracking and disposal. It is necessary to analyze a strength for structures mounted on the deck because the MMUSV performs missions under a severe sea state. In this paper, a strength analysis of the mast structure is performed on static loads and lateral external loads to verify an adequacy of the designed mast through a series of simulations. Based on the results of captive model tests, a strength analysis for a heave motion of the mast structure is conducted using a simulation tool. Also a simulation and fatigue test for a mounting part between the MMUSV and the dummy gun are performed using a specimen. The simulation and test results are represented that a structure of the mast and mounting part of the dummy gun are appropriately designed.he impact amount are performed through simulation and experiments.