한국정보기술학회 영문논문지 (Journal of Advanced Information Technology and Convergence)

  • 제8권2호
  • /
  • Pages.139-145
  • /
  • 2018
  • /
  • 2234-1072(pISSN)
  • /
  • 2234-0963(eISSN)
한국정보기술학회 (Korean Institute of Information Technology)
권호 표지
DOI QR코드

DOI QR Code

Comparison of Driving Time between Stop-motion Method and Moving-motion Method

  • 투고 : 2018.12.10
  • 심사 : 2018.12.28
  • 발행 : 2018.12.31
⟨ 이전 논문 다음 논문 ⟩

초록

Improvement of the speed of the gantry among equipment that mounts a chip using SMT can improve productivity. In order to improve the performance of the gantry, there are studies such as a method of increasing the speed of adsorption, the speed of the gantry by reducing the weight, and a method of facilitating the use of the gantry. But all of these are ways of improving equipment. In this paper, we propose a method to improve the speed of gantry mounting microchip. The method is to shorten the driving time of the gantry. To do this, calculate the driving time using the existing method. And we calculate the travel time using the method presented in this paper. As a result, the time calculated by the proposed method is reduced by 14%.

키워드

참고문헌

  1. D. M. Beyer and P. Dangl, & Wendler, "A Unifying View on SMT-Based Software Verification", J. of automated reasoning, Vol. 60, No. 3, pp. 299-305, Mar. 2018. https://doi.org/10.1007/s10817-017-9432-6
  2. T. Merkle and R. Gotzen, "Millimeter-Wave Surface Mount Technology for 3-D Printed Polymer Multichip Modules", IEEE Trans. on Components, Packaging and Manufacturing Technology, Vol. 5, No. 2, pp. 201-206, Feb. 2015. https://doi.org/10.1109/TCPMT.2014.2387232
  3. Y. M. Kim and C. S. Kim, "Development of the Air Stick Feeder for Inserting the Relay", Journal of the Korea Academia-Industrial cooperation Society., Vol. 16, No. 2, pp. 1398-1402, Feb. 2015. https://doi.org/10.5762/KAIS.2015.16.2.1398
  4. S. H. Kim and C. S. Kim, "The most Efficient Path Algorithm from Feeders to PCBs. International Journal of Control and Automation", Indian Journal of Public Health Research & Development., Vol. 9, No. 8, pp. 633-637, Aug. 2018.
  5. S. H. Kim and C. S. Kim, "A Unifying View on SMT-Based Software Verification", International Journal of Control and Automation., Vol. 8, No. 9, pp. 11-20, Sept. 2015. https://doi.org/10.14257/ijca.2015.8.9.02
  6. S. H. Kim and C. S. Kim, "A Confirmation of the minimum moving time to the stop-motion in the (sLa-Camera-pLa)type", KIPS Tr. Software and Data Eng., Vol. 6, No. 5, pp. 223-228, May H. Ki. 2017. https://doi.org/10.3745/KTSDE.2017.6.5.223
  7. S. H. Kim and C. S. Kim, "A Comparison of the moving time about gantry", KIPS Tr. Software and Data Eng., Vol. 6, No. 3, pp. 135-140, Mar. 2017. https://doi.org/10.3745/KTSDE.2017.6.3.135
  8. S. H. Kim and C. S. Kim, "Comparing the placement time of Stop-motion and moving-motion", Indian Journal of Public Health Research & Development., Vol. 9, No. 8, pp. 633-637, Aug. 2018.
  9. S. H. Kim and C. S. Kim, "Minimum Time algorithm for Gantry Travel", International Journal of Hybrid Information Technology., Vol. 9, No. 8, pp. 417-424, Aug. 2016.
  10. S. H. Kim and C. S. Kim, "An algorithm of the Minimum Time on the (sLa-Camera-pLb)path", International Journal of Hybrid Information Technology., Vol. 13, No. 10, pp. 337-342, Oct. 2016.