Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

The influence of initial stresses on energy release rate and total electro-mechanical potential energy for penny-shaped interface cracks in PZT/Elastic/PZT sandwich circular plate-disc

  • Akbarov, Surkay D. (Department of Mechanical Engineering, Yildiz Technical University) ;
  • Cafarova, Fazile I. (Genje State University) ;
  • Yahnioglu, Nazmiye (Department of Mathematical Engineering, Yildiz Technical University, Davutpasa Campus)
  • Received : 2018.03.13
  • Accepted : 2018.07.24
  • Published : 2018.09.25
⟨ Previous Next ⟩

Abstract

This paper studies the energies and energy release rate (ERR) for the initially rotationally symmetric compressed (or stretched) in the inward (outward) radial direction of the PZT/Elastic/PZT sandwich circular plate with interface penny-shaped cracks. The investigations are made by utilizing the so-called three-dimensional linearized field equations and relations of electro-elasticity for piezoelectric materials. The quantities related to the initial stress state are determined within the scope of the classical linear theory of piezoelectricity. Mathematical formulation of the corresponding problem and determination of the quantities related to the stress-strain state which appear as a result of the action of the uniformly normal additional opening forces acting on the penny-shaped crack's edges are made within the scope of the aforementioned three-dimensional linearized field equations solution which is obtained with the use of the FEM modelling. Numerical results of the energies and ERR and the influence of the problem parameters on these quantities are presented and discussed for the PZT- 5H/Al/PZT-5H, PZT-4/Al/PZT-4, $BaTiO_3/Al/BaTiO_3$ and PZT-5H/StPZT-5H sandwich plates. In particular, it is established that the magnitude of the influence of the piezoelectricity and initial loading on the ERR increases with crack radius length.

Keywords

References

  1. Akbarov, S.D. (2013), Stability Loss and Buckling Delamination: Three-Dimensional Linearized Approach for Elastic and Viscoelastic Composites, Springer, Heidelberg, New York, USA.
  2. Akbarov, S.D. and Yahnioglu, N. (2013), "Buckling delamination of a sandwich plate-strip with piezoelectric face and elastic core layers", Appl. Math. Model., 37, 8029-8038. https://doi.org/10.1016/j.apm.2013.02.051
  3. Akbarov, S.D. and Yahnioglu, N. (2016), "On the total electromechanical potential energy and energy release rate at the interface crack tips in an initially stressed sandwich plate-strip with piezoelectric face and elastic core layers", Int. J. Solids Struct., 88-89, 119-130. https://doi.org/10.1016/j.ijsolstr.2016.03.014
  4. Akbarov, S.D. and Turan, A. (2009), "Mathematical modelling and the study of the influence of initial stresses on the SIF and ERR at the crack tips in a plate-strip of orthotropic material", Appl. Math. Model., 33, 3682-3692. https://doi.org/10.1016/j.apm.2008.12.015
  5. Cafarova, F.I., Akbarov, S.D. and Yahnioglu, N. (2017), "Buckling delamination of the PZT/Metal/PZT sandwich circular platedisc with penny-shaped interface cracks", Smart Struct. Syst., 19(2), 163-179. https://doi.org/10.12989/sss.2017.19.2.163
  6. Feng W.J., Li, Y.S. and Xu, Z.H. (2009), "Transient response of an interfacial crack between dissimilar magnetoelectroelastic layers under magnetoelectro-mechanical impact loadings: Mode - I problem", Int. J. Solids Struct., 46, 3346-3356. https://doi.org/10.1016/j.ijsolstr.2009.05.003
  7. Eskandari, M., Moeini-Ardakani, S.S. and Shodja, H.M. (2010), "An energetically consistent annular crack in a piezoelectric medium", Eng. Fract. Mech., 77, 819-831. https://doi.org/10.1016/j.engfracmech.2010.01.008
  8. Guz, A.N. (1981), Brittle Fracture of the Materials with Initial Stresses, Naukova Dumka, Kiev, Ukraine (in Russian).
  9. Guz, A.N. (1999), Fundamentals of the Three-Dimensional Theory of Stability of Deformable Bodies, Springer-Verlag, Berlin, Heidelberg, Germany.
  10. Guz, A.N. (2004), Elastic Waves in Bodies With Initial (Residual) Stresses, "A.C.K.", Kiev, Ukraine.
  11. Henshell, R.D. and Shaw, K.G. (1975), "Crack tip finite elements are unnecessary", Int. J. Numer. Meth. Eng., 9, 495-507. https://doi.org/10.1002/nme.1620090302
  12. Kuna, M. (2006), "Finite element analysis of cracks in piezoelectric structures: a survey", Arch. Appl. Mech., 76, 725-745. https://doi.org/10.1007/s00419-006-0059-z
  13. Kuna, M. (2010), "Fracture mechanics of piezoelectric materials -where are we right now?", Eng. Fract. Mech., 77, 309-326. https://doi.org/10.1016/j.engfracmech.2009.03.016
  14. Kudryatsev, B.A., Parton, V.Z. and Rakitin, V.I. (1975), "Breakdown mechanics of piezoelectric materials -axisymmetric crack on boundary with conductor", Prikl. Math. Mekh., 39, 352-362.
  15. Landis, C.M. (2004), "Energetically consistent boundary conditions for electro-mechanical fracture", Int. J. Solids Struct., 41, 6291-6315. https://doi.org/10.1016/j.ijsolstr.2004.05.062
  16. Li, Y.D. and Lee, K.Y. (2012), "Three dimensional axisymmetric problems in piezoelectric media: Revisited by a real fundamental solutions based new method", Appl. Math. Model., 36, 6100-6113. https://doi.org/10.1016/j.apm.2012.01.054
  17. Li, Y.S., Cai, Z.Y. and Wang, W. (2011), "Electroelastic behaviour of annular interfacial crack between dissimilar crack between dissimilar piezoelectric layers", Philos. Mag., 91(23), 3155-3172. https://doi.org/10.1080/14786435.2011.570280
  18. Li, Y.S., Feng, W.J. and Xu, Z.H. (2009), "A penny-shaped interface crack between a functionally graded piezoelectric layer and a homogeneous piezoelectric layer", Mecanica, 44(4) 377-387.
  19. Li, W., McMeeking, R,M. and Landis, C.M. (2008), "On the crack face boundary conditions in electro-mechanical fracture and an experimental protocol for determining energy release rates", Eur. J. Mech. A - Solids, 27, 285-301. https://doi.org/10.1016/j.euromechsol.2007.08.007
  20. Narita, F., Lin, S. and Shindo, Y. (2003), "Penny-shaped crack in a piezoelectric cylinder under Mode I loading", Arch. Mech., 55(3), 275-304.
  21. Parton, V.Z. (1976), "Fracture mechanics of piezoelectric materials", Acta Astronaut, 3(9-10), 671-683. https://doi.org/10.1016/0094-5765(76)90105-3
  22. Ren, J.N., Li, Y.S. and Wang, W. (2014), "A penny-shaped interfacial crack between piezoelectric layer and elastic halfspace", Struct. Eng. Mech., 62(1), 1-17. https://doi.org/10.12989/SEM.2017.62.1.001
  23. Yang, F. (2004), "General solutions of a penny-shaped crack in a piezoelectric material under opening mode loading", Q. J. Mech. Appl. Math., 57(4), 529-550. https://doi.org/10.1093/qjmam/57.4.529
  24. Yang, J. (2005), An Introduction to the Theory of Piezoelectricity, Springer, New York, USA.
  25. Zienkiewicz, O.C. and Taylor, R.L. (1989), The Finite Element Method: Basic Formulation and Linear Problems. Vol. 1., Fourth Ed., McGraw-Hill Book Company, Oxford, UK.
  26. Zhong, X.C. (2012), "Fracture analysis of a piezoelectric layer with a penny-shaped and energetically consistent crack", Acta Mech., 223, 331-345. https://doi.org/10.1007/s00707-011-0565-0