Structural Monitoring and Maintenance

  • 제5권3호
  • /
  • Pages.345-361
  • /
  • 2018
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mode shape identification using response spectrum in experimental modal analysis

  • Babakhani, Behrouz (Department of Civil Engineering, Arak branch, Islamic Azad University) ;
  • Rahami, Hossein (School of Engineering Science, College of Engineering, University of Tehran) ;
  • Mohammadi, Reza Karami (Department of Civil Engineering, K.N. Toosi, University of Technology)
  • 투고 : 2018.07.23
  • 심사 : 2018.08.19
  • 발행 : 2018.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The set of processes performed to determine the dynamic characteristics of the constructed structures is named experimental modal analysis. Using experimental modal analysis and interpreting its results, structural failure can be assessed and then it would be possible to plan for their repair and maintenance. The purpose of the experimental modal analysis is to determine the resonance frequencies, mode shapes and Mode damping for the structure. Diverse methods for determining the shape of the mode by various researchers have been presented. There are pros and cons for each of these methods. This paper presents a method for determining the mode shape of the structures using the response spectrum in the experimental modal analysis. In the first part, the principles of the proposed method are described. Then, to check the accuracy of the results obtained from the proposed method, single and multiple degrees of freedom models were numerically and experimentally investigated.

키워드

과제정보

연구 과제 주관 기관 : University of Tehran

참고문헌

  1. Abel-Ghaffer, A.M. and Housner, G.W. (1978), "Ambient vibration test of suspension bridge", J. Eng. Mech. Div. - ASCE, 104(5), 983-999.
  2. Begg, R.D., Mackenzie, A.C., Dodds, C.J. and Loland, O. (1976), "Structural integrity monitoring using digitalprocessing of vibration signals", Proceedings of the 8th Annual Offshore Technology Conference (OTC),Texas, USA.
  3. Brandt, A. (2011), Noise and Vibration Analysis: Signal Analysis and Experimental Procedures (1st Ed.), JohnWiley & Sons.
  4. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference (IMAC), USA.
  5. Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output only systems using frequency domain decomposition", J. Smart Mater. Struct., 10, 441- 445. https://doi.org/10.1088/0964-1726/10/3/303
  6. Brincker, V. (2015), Introduction to operational modal analysis, published John Wiley & Sons, Ltd, United Kingdom
  7. Ewins, D.J. (2000), Modal Testing: Theory, Practice and Application (2nd Ed.), RESEARCH STUDIES PRESS LTD, England
  8. Hanson, D. (2006), "Operational modal analysis and model updating with a cyclostationary input", Ph.D. Thesis, University of New South Wales, Australia.
  9. James, G.H., Crane, T. G. and Laufer, J.P. (1995), "The natural excitation Technique (NexT) for modal parameter extraction from operating structures", J. Anal. Exper. Modal Anal., 10(4), 260-277.
  10. Lopez Aenlle, M., Fernández, P., Brincker, R. and Fernandez Canteli, A. (2010), "Scaling factor estimation using an optimized mass change strategy", Mech. Syst. Signal Pr., 24(5), 1260-1273. https://doi.org/10.1016/j.ymssp.2009.06.011
  11. Magalhaes, F., Cunha, A ., Caetano, E. and Brincker, R. (2010), "Damping estimation using free decays and ambient vibration tests", Mech. Syst. Signal Pr., 24(5), 1274-1290. https://doi.org/10.1016/j.ymssp.2009.02.011
  12. Nagarajaiah, S. and Chen, B. (2016), "Output only structural modal identification using matrix pencil method ", Struct. Monit. Maint., 3(4), 395-406. https://doi.org/10.12989/smm.2016.3.4.395
  13. Providakis, C., Tsistrakis, S., Voutetaki, M., Tsompanakis, Y., Stavroulaki, M., Agadakos, J., Kampianakis, E. and Pentes, G. (2015), "A new damage identification approach based on impedance-type measurements and 2D error statistics ", Struct. Monit. Maint., 2( 4), 319-338. https://doi.org/10.12989/SMM.2015.2.4.319
  14. Saboonchi, H. and Kabir, M. (2016), "Sensor fusion: acoustic emission and strain", Sensor. Actuat. A: Phys., 247(15), 566-578. https://doi.org/10.1016/j.sna.2016.05.014
  15. Steve, P., Beeby, S. and Ensel, G. (2004), MEMS Mechanical Sensors, Publisher, Artech Print on Demand.
  16. Thomson, W.T. and Dahleh, M.D. (1998), Theory of Vibration with Applications (5th Ed.), Prentice Hall.
  17. Wenzel, H. and Pichler, D. (2005), Ambient Vibration Monitoring (1st Ed.), John Wiley & Sons, Ltd, England.
  18. Young, L.W.C. and Budynas, R. (2002), Roark's Formulas for Stress and Strain , McGraw-Hill.
  19. Zhang, L., Brincker, R. and Andersen, R. (2005), "An overview of operational modal analysis: Major development and issues", Proceedings of the 1st International Operational Modal Analysis Conference (IOMAC), Copenhagen, Denmark, April 26-27.